Product Finder results

EMULTEX N6163 is an APEO free vinyl acetate acrylic polymer dispersion with a good pigment binding power. It is suitable for formulating premium or general purpose interior coatings for general walls, ceiling, cement fibre board or paneling.

Acrylic ester used for polymer manufacturing and as a raw material for syntheses.

Molar Mass(g/mol): 184.28

Chemical formula:

Stoichiometric formula: C₁₁H₂₀O₂  

CAS number: 103-11-7

Abalyn™ D-E methyl ester of gum rosin, is an amber-colored, near-neutral, tacky, viscous liquid. It is resinous in nature with clarity and high refractive index, low vapor pressure, high boiling point, and good thermal stability. It has excellent surface-wetting properties. These physical properties, plus its wide compatibility, make it useful in a variety of applications, including lacquers, inks, paper coatings, varnishes, adhesives, sealing compounds, plastics and wood preservatives. To assure minimum odor of products in which it is used, it is given a special steam sparging treatment.

• Alcohol-soluble
• Excellent perfume fixative
• Excellent surface wetting and adhesion properties
• Excellent wood preservative
• Insoluble in water
• Liquid tackifier and plasticizer resin for a wide variety of raw materials and polymers

Abitol™ E resin hydroabietyl alcohol is a colorless, tacky, balsamic resin. Its tackiness and extremely pale color, combined with its solubility in common organic solvents and compatibility with resins, film-formers, and oils, have led to its use as a resinous plasticizer and/or tackifier in plastics, lacquers, inks and adhesives. Chemically, Abitol E resin is a high molecular weight, primary, monohydric alcohol derived from rosin acids that have been hydrogenated to reduce unsaturation. Abitol E resin undergoes the general types of chemical reaction common to most primary alcohols.

• Alcohol-soluble
• High refractive index
• High viscous tackifier resin with excellent ageing characteristics
• Light color
• Low odor
• Reactive functionality
• Wide solubility and compatibility range

Non-saturated organic acid used for polymer manufacturing and as a raw material for syntheses.

Molar Mass(g/mol): 72.06
Chemical formula:

Stoichiometric formula: C₃H₄O
CAS number: 79-10-7

Non-saturated organic acid used for polymer manufacturing and as a raw material for syntheses.

Molar Mass(g/mol): 72.06

Chemical formula:

Stoichiometric formula: C₃H₄O₂   
CAS number: 79-10-7

• Compatibility with an array of hydrocarbon tackifying resins
• Excellent thermal stability
• Good adhesion with excellent peel strength
• In formulation, enables a robust adhesive system with a broad processing window and sprayability at temperatures as low as 130°C
• Low color and odor
• Reliable global supply
• Requires lower tackifier loading than with most SBC-based formulations

• Compatibility with an array of hydrocarbon tackifying resins
• Excellent thermal stability
• Good adhesion with excellent peel strength
• In formulation, enables a robust adhesive system with a broad processing window and sprayability at temperatures as low as 130°C
• Low color and odor
• Reliable global supply
• Requires lower tackifier loading than with most SBC-based formulations

• Compatibility with an array of hydrocarbon tackifying resins
• Excellent thermal stability
• Good adhesion
• High heat resistance
• Low color and odor
• Enable high polymer loading hotmelt adhesive

• Excellent high temperature resistance, while having <160°C RBSP
• High tensile strength with good elongation
• Provides good adhesion to low surface energy substrates without pretreatment 
• Excellent thermal stability
• Compatible with an array of hydrocarbon tackifying resins
  
• Low color and odor
  
• Reliable global supply

• Compatibility with a wide range of hydrocarbon tackifying resins
• Excellent thermal stability
• Good adhesion with excellent peel strength
• In formulation, enables a robust adhesive system with a broad processing window and sprayability
• Low color and odor
• Reliable global supply

• Compatibility with an array of hydrocarbon tackifying resins
• Excellent thermal stability
• Low Needle Penetration
• Good adhesion with excellent peel strength
• Low color and odor
• Requires lower tackifier loading than with most SBC based formulations

• Compatibility with an array of hydrocarbon tackifying resins
• Excellent thermal stability
• Good adhesion with excellent peel strength
• In formulation, enables a robust adhesive system with a broad processing window and sprayability at temperatures as low as 130°C
• Low color and odor
• Reliable global supply
• Requires lower tackifier loading than with most SBC-based formulations

Synthomer Ltd has developed Alcotex 225 for use as build-up suppressant for vinyl chloride suspension polymerisation. It eliminates build-up on the reactor walls leading to a substantially higher number of production runs before the reactor has to be opened and pressure cleaned. This results in higher productivity rates and a better quality PVC resin.

Synthomer Ltd has developed Alcotex 234 for use in conjunction with Alcotex 225 as a buildup suppressant for vinyl chloride suspension polymerisation. It eliminates build-up on the reactor baffles and stirrer or areas of poor surface quality. Use of Alcotex 234 will lead to a substantially higher number of production runs before the reactor has to be opened and pressure cleaned. This results in higher productivity rates and a better quality PVC resin.

Alcotex 432P is a 43% hydrolysed polyvinyl alcohol supplied as a low viscosity methanol based solution. It has been specifically developed by Synthomer Limited as a secondary suspending agent for vinyl chloride suspension polymerisation.

It may be used in conjunction with conventional primary suspending agents. In optimised recipes, improvements can be obtained in the porosity/bulk density relationship. Better porosity facilitates both monomer removal and plasticiser uptake. These criteria are further enhanced when Alcotex 432P is used with the Alcotex range of primary suspending agents.

Alcotex 45 is a 45% hydrolysed polyvinyl alcohol supplied as a low viscosity solution in a water/isopropyl alcohol solution. It has been specifically developed as a secondary suspending agent for vinyl chloride suspension polymerisation. It may be used in conjunction with conventional primary suspending agents. In optimised recipes, improvements can be obtained in the porosity/bulk density relationship. Better porosity facilitates both monomer removal and plasticiser uptake. These criteria are further enhanced when Alcotex 45 is used with the Alcotex range of primary suspending agents.

NMR measurements have shown that Alcotex 45 has a random distribution of acetate groups.

Alcotex 55-002H is a colloidal dispersion of polyvinyl alcohol. It has been specifically developed by Synthomer Ltd as a secondary suspending agent for vinyl chloride suspension polymerisation. It may be used in conjunction with conventional primary suspending agents. In optimised recipes, improvements can be obtained in the porosity/bulk density relationship. Better porosity facilitates both monomer removal and plasticiser uptake. These criteria are further enhanced when Alcotex 55-002H is used with the Alcotex range of primary suspending agents.

NMR measurements have shown that Alcotex 55- 002H has a random distribution of acetate groups.

Alcotex 552P is an aqueous solution of a 55% hydrolysed polyvinyl alcohol. It has been developed by Synthomer Ltd as a porosity enhancement agent for PVC suspension polymerisation. It has a low residual methanol content. Alcotex 552P can be used in conjunction with conventional primary suspending agents.

In optimised recipes, improvements can be obtained in the porosity/bulk density relationship. Better porosity facilitates both monomer removal and plasticiser uptake. These criteria are further enhanced when Alcotex 552P is used with the Alcotex range of primary suspending agents.

NMR measurements have shown that Alcotex 552P has a random distribution of acetate groups.

Alcotex 72.5 is a polyvinyl alcohol which has been specifically developed for use as a primary suspending agent for vinyl chloride suspension polymerisation. It is manufactured by Synthomer Ltd using our exsclusive process which has advantages over other manufacturing methods, in that it enables more efficient control over the degree of hydrolysis and particle size of the product. 

Alcotex 7206 is a 72.5% hydrolysed, low/ medium molecular weight polyvinyl alcohol which has been specially developed for use as a primary suspending agent for vinyl chloride suspension polymerisation.

NMR measurements have shown that Alcotex 7206 has a blocky distribution of acetate groups.

Alcotex 8048 is an 80% hydrolysed, high molecular weight polyvinyl alcohol which has been specially developed for use as a primary suspending agent for vinyl chloride suspension polymerisation.

Alcotex 864 is a polyvinyl alcohol, internally plasticized and supplied in a water solution. Alcotex 864 has a medium high hydrolysis level and a low molecular weight.

FEATURES

Aqueous solution.

Forms very flexible films when dry.

Dry films can be easily dissolved.

Very receptive to ink jet printing inks.

The dry film can be insolublised by crosslinking.

Non-ionic copolymer.

Alcotex 864 is manufactured on a dedicated polymerisation plant in Harlow, England.

Alcotex 8847 is an 88% hydrolysed polyvinyl alcohol for use in speciality applications such as vinyl acetate containing copolymer resins as well as in standard grades.

Alcotex 975 is an internally plasticized polyvinyl alcohol supplied in a solvent system of water and propan-1-ol. Alcotex 975 has a high hydrolysis level and a medium molecular weight.

FEATURES

Ready to use solution.

Forms very flexible films when dry.

Dry films can be easily dissolved.

Very receptive to ink jet printing inks.

The dry film can be insolublised by crosslinking.

Non-ionic copolymer.

Alcotex 975 is manufactured on a dedicated polymerisation plant in Harlow, England.

Alcotex B72 is polyvinyl alcohol which has been specially developed for use as a primary suspending agent for vinyl chloride suspension polymerisation. It is manufactured by Synthomer UK Ltd. using our exclusive manufacturing process which has advantages over other manufacturing methods, in that it allows more efficient control over the degree of hydrolysis and particle size of the product.

NMR measurements have shown that Alcotex B72 has a block distribution of acetate groups.

Alcotex B72-LF is a modified version of Alcotex B72 polyvinyl alcohol. It has been specially developed to help combat foaming when used as a primary suspending agent for vinyl chloride suspension polymerisation. It is manufactured by Synthomer UK Ltd. using our exclusive manufacturing process and offers the additional advantage of reducing foaming during S-PVC polymerisations, enabling throughput rates and production efficiency to be maintained. 

Alcotex WD100 is an aqueous solution of a 43% hydrolysed polyvinyl alcohol. It has been specifically developed by Synthomer Ltd as a secondary suspending agent for vinyl chloride polymerisation. Infinitely dilutable in water, and with an extremely low methanol content, Alcotex WD100 offers increased PVC resin porosity and reduced levels of gels or ‘fish eyes’ when compared to traditional products.In optimised recipes, improvements can be obtained in the porosity/bulk density relationship. Better porosity facilitates both monomer removal and plasticiser uptake. These criteria are further enhanced when Alcotex WD100 is used with the Alcotex range of primary suspending agents. 

Alcotex WD100 is also compatible with other conventional primary suspending agents.

Alcotex WD100 is an aqueous solution of a 43% hydrolysed polyvinyl alcohol specifically developed by Synthomer Ltd.  Infinitely dilutable in water, and with an extremely low methanol content.  

NMR measurements have shown that Alcotex WD100 has a random distribution of acetate groups.

The data below represents typical values obtained with different batches of Alcotex WD100.

AXILAT™ HP 8510 is a vinyl acetate, vinyl versatate copolymer resin in redispersible powder form. It is a highly versatile resin with high redispersibility in water and used in dry mortars.

AXILAT™ UP 460S is a hydrophobic vinyl acetate/vinyl versatate/acrylate core-shell terpolymer resin in redispersible powder form. EMICODE EC1+ classification can be achieved  due to the very high alkaline resistance of the product.

AXILAT™ UP 460S is manufactured without the addition of organic solvent, plasticizer and film forming agent.

Anionic aqueous dispersion of a butadiene-acrylonitrile copolymer

Anionic aqueous dispersion of a carboxylated butadiene-acrylonitrile copolymer containing a non-staining, non-discolouring antioxidant

Anionic aqueous dispersion of a carboxylated butadiene-acrylonitrile copolymer 

Anionic aqueous dispersion of a butadiene-acrylonitrile copolymer containing a non-discolouring antioxidant

Copolymer of butadiene-acrylonitrile partitioned with calcium carbonate

Copolymer of butadiene-acrylonitrile partitioned with calcium carbonate

Copolymer of butadiene-acrylonitrile partitioned with calcium carbonate

Copolymer of butadiene-acrylonitrile partitioned with PVC

Copolymer of butadiene-acrylonitrile partitioned with calcium carbonate

Copolymer of butadiene-acrylonitrile partitioned with PVC

Copolymer of butadiene-acrylonitrile partitioned with calcium carbonate

Cuprous iodide can be used as a heat stabilising additive for engineering polyamide plastics or in fine chemical synthesis as a catalyst.

• Dilutible with water and aqueous solutions of alcohols and glycols
• Provides highly stable emulsions

• Dilutible with water and aqueous solutions of alcohols and glycols
• Provides highly stable emulsions

• Fully saponified sodium salt of tall oil
• Readily dissolves in water
• Dry, free flowing powder

Dresinate™ TX-60W Rosin Soap is a 60% solids, aqueous solution of a fully saponified sodium soap of tall oil. It is designed mainly as the soap emulsifier in the manufacture of road surfacing asphalt anionic emulsions of the RS and MS types.

• High Solids
• Uniformity
• Dilutibility
• Emulsifier Effectiveness

DURAGUARD M100 is a high-capacity absorbent used to remove mercury (Hg) from hydrocarbon gas and liquid streams.

DURAGUARD S100 is a copper-based absorbent that removes hydrogen sulfide (H₂S) from natural gas and natural gas liquids, and co-removes H₂S and mercury from hydrocarbon gas and liquid streams.

Dymerex™ modified gum rosin is a pale, acidic, thermoplastic, high softening point resin. It is composed predominately of dimeric acids derived from rosin with lesser amounts of monomeric resin acids and neutral materials of rosin origin. Dymerex™ modified resin has high resistance to oxidation and does not crystallize from solutions or from solid compositions. It is compatible with many natural and synthetic film formers and rubbers. Being an acidic resin, it reacts readily with polyalcohols or hydrated lime to yield high melting derivatives.

• Alcohol-soluble
• Non-crystalline
• Resistant to oxidation
• Thermoplastic rosin acid
• Very high softening point

EMULTEX 4003 is non-APEO vinyl acetate acrylic polymer dispersion design for curing compound in construction.

In addition, it is cement compatible thus suitable for mortar modification.

EMULTEX 4030 is an APEO free vinyl acetate acrylic polymer dispersion with a good pigment binding power. It is suitable for formulating premium or general purpose interior coatings for general walls, ceiling, cement fibre board or paneling.

EMULTEX 4040 is an APEO free vinyl acetate acrylic polymer dispersion with a good pigment binding power. It is suitable for formulating premium or general purpose interior coatings for general walls, ceiling, cement fibre board or paneling.

EMULTEX 8200 is a fine to medium particle sized colloid stabilised vinyl acetate Veova 10 polymer dispersion with good pigment binding power.

Based on APEO free surfactants, EMULTEX 8200 confers excellent application and performance characteristics in a wide range of interior emulsion paints. It is specifically designed to give high sheen with a “soft feel” finish in premium interior sheen coatings, or textured coatings.

Emultex AD 230 is a water-based dispersion of vinyl acetate acrylic copolymer.

Emultex AD 230 is properly recommended for coatings in contact with food and non-edible cheese rinds

CT 302 is a plasticized Vinyl Acetate polymer. It possesses excellent wet tack and good bonding to paper/veneer and board.

CT 302 is designed specially for general paper/veneer lamination application. It can be diluted with water from 10% to 30%.

CT 302 can be applied both manually and by machine. Recommended coating weight is about 150 to 250gsm.

CT 400H is a readied for use and filled Vinyl Acetate homopolymer stabilised with specialty polyvinyl alcohol. It has good surface roughness coverage and yet good initial adhesion on paper and wood substrate.

CT 9212 is a readied for use compounded and filled Vinyl Acetate homopolymer stabilised with specialty polyvinyl alcohol. It has good surface roughness coverage and yet good initial adhesion on paper and wood substrate.

EMULTEX FR 728 is a specially colloid stabilised vinyl acetate - vinyl versatate copolymer dispersion developed for formulation of water-borne intumescent coatings. EMULTEX FR 728 provides a quick char formation with high expansion factor.

EMULTEX FR 728 is designed for intumescent coatings for fire protection up to R60.

EMULTEX FR 797 is a specially colloid stabilised and vinyl acetate - vinyl versatate copolymer dispersion developed for formulation of waterborne intumescent coatings. EMULTEX FR 797 provides a slow char formation with medium expansion factor

EMULTEX FR 797 is recommended for intumescent coatings with fire protection up to 120min. 

Emultex P 6320 is a water-based copolymer dispersion based on vinyl acetate and maleic acid dibutyl ester, recommended for manufacturing non-edible cheese crust.

Emultex P 6320 is suitable for the manufacturing of physiologically perfect coatings for food, especially for the manufacturing of coatings for hard cheese.

The specific national legislation must be taken into account.

Emultex P 7215 is a plasticizer-free water-based dispersion based on vinyl acetate and VeoVa (vinyl ester of versatic acid).

Emultex P 7215 is especially suitable for the manufacturing of interior and exterior paints with excellent cost/performance relationship. It may also be used as a binder for the formulation of medium and medium-high PVC paints.

Emultex P 7215 is also appropriate for the manufacturing of semi-gloss paints with good characteristics regarding gloss and blocking resistance.  

Emultex P 7218 is a water-based dispersion based on vinyl acetate and VeoVa (vinyl ester of versatic acid).

Emultex P 7218 is especially recommended for the formulation of interior and exterior paints on a wide PVC range.

It is furthermore recommended for the manufacturing of semi-gloss paints and textured paints.

Emultex P 7252 is a plasticizer-free water-based dispersion based on vinyl acetate and VeoVa (vinyl ester of versatic acid).

Emultex P 7252 is especially suitable for the manufacturing of interior and exterior paints with excellent water, saponification and weathering resistance. 

It is also appropriate for the manufacturing of semi-gloss paints.

Emultex P 7580 is a plasticizer-free water-based dispersion based on vinyl acetate and acrylic acid ester.

Emultex P 7580 is especially recommended for the formulation of interior and exterior flat paints with medium and medium-high PVC. It is also recommended to formulate Semi-gloss paints.

Emultex P 7580 is also suitable to produce Textured paints.

A vinyl acetate – versatate copolymer dispersion with fine particle size, good water and alkali resistance. It is highly suitable for broad wall decorative applications It posses good binding power, good scrub resistance and suitable as a versatile binder for interior and exterior applications

Emultex VV 579 is recommended for Interior matt, semi and gloss finishes. It is also suitable for stucco and textured finishes

EMULTEX VV 665 is a medium particle size, specially colloid stabilised vinyl acetate - vinyl versatate copolymer dispersion. EMULTEX VV 665 offers high scrub resistance, high gloss and good saponification resistance.

EMULTEX VV 665 is recommended for solvent free matt and silk paints. When suitably compounded EMULTEX VV 665 is recommended as a binder in the production of flexible fillers, caulks and DIY cartridge applied sealants.

EMULTEX VV 675 is a medium particle size, colloid stabilised vinyl acetate - vinyl versatate copolymer dispersion. EMULTEX VV 675 offers high scrub resistance and high exterior durability.

EMULTEX VV 675 is recommended for exterior masonry paints and silk to gloss interior wall paints.

EMULTEX VV 676 is a medium particle size, colloid stabilized aqueous dispersion of a vinyl acetate - vinyl versatate - acrylate copolymer. EMULTEX VV 676 offers high scrub resistance, high exterior durabillity and good low temperature film forming properties.

EMULTEX VV 676 is recommended for a broad range of interior and exterior masonry coatings.

EMULTEX VV 679 is a medium particle size, colloid stabilised vinyl acetate - vinyl versatate copolymer dispersion. EMULTEX VV 679 offers high scrub resistance and high gloss.

EMULTEX VV 679 is recommended for matt and silk wall paints and also can be used in ready mixed fillers and ceramic tile adhesives.

• Heat stability
• Pure aromatic monomer composition
• Very high softening point
• Water-white initial color

• Heat stability
• Highest softening point available
• Pure aromatic monomer composition
• Water-white initial color

Acrylic ester used for polymer manufacturing and as a raw material for syntheses.

Molar Mass(g/mol): 100.12

Chemical formula:

Stoichiometric formula: C₅H₈O₂ 
CAS number: 140-88-5

Acrylic ester used for polymer manufacturing and as a raw material for syntheses.

Molar Mass(g/mol): 100.12

Chemical formula:

Stoichiometric formula: C₅H₈O₂ 
CAS number: 140-88-5

Flamtard H is a non-hazardous, antimony free, flame retardant synergist used in plastics such as PVC to increase char consistency and strength.

Flamtard S is a non-hazardous, antimony free, flame retardant synergist used in plastics such as polyamide engineering plastics to reduce flammability.

Flamtard V100 is a flame retardant synergist that can be used in combination with Flamtard H in PVC applications as a cost competitive replacement for antimony trioxide.

Foral™ 105-E CG hydrogenated gum rosinate is a cosmetic grade resin derived from the esterification of a highly stabilized gum rosin and pentaerythritol. This thermoplastic resin has excellent resistance to oxidation and discoloration caused by heat and aging. Foral 105-E CG, with its high softening point, is the resin of choice when a harder resin is desired.

• Derived from a natural, renewable source
• Excellent oxidative and color stability
• High softening point
• Low odor
• Soluble in non-polar liquids
• Wide compatibility range

Foral™ 105-E ester of hydrogenated rosin is a pale, thermoplastic ester resin derived from pentaerythritol and a highly stabilized rosin. Like Foral 85-E ester of hydrogenated rosin, which is produced from the same unique oxidation-resistant rosin, Foral 105-E offers advantages as the tackifier or modifier resin in various adhesives and coating compositions. In these applications, both resins exhibit resistance to oxidation and to discoloration caused by heat and aging. Foral 105-E has a substantially higher softening point and is therefore indicated where a harder resin is desired. It is also used in UV cured acrylics to improve adhesion to low surface energy substrates when high tack is not needed.

• Compatible with UV acrylic adhesives
• Excellent resistance to oxidation
• High softening point
• Improved adhesion to low surface energy substrates
• Light color
• Low odor
• Thermoplastic hydrogenated resin
• Wide solubility and compatibility range

Foral™ 85-E CG hydrogenated gum rosinate is a cosmetic grade resin derived from the esterification of a highly stabilized gum rosin and glycerol. This light amber, thermoplastic resin has excellent resistance to oxidation and discoloration caused by heat and aging. Foral 85-E CG contributes adhesion to various cosmetic and depilatory wax formulations.

• Contributes to adhesion
• Derived from a natural, renewable source
• Excellent oxidative and color stability
• Light color
• Low odor
• Wide solubility and compatibility range

• Compatible with UV acrylic adhesives
• Excellent resistance to oxidation and discoloration
• Exceptional cutaneous tolerance
• Improved adhesion to low surface energy substrates
• Light color
• Low odor
• Medium softening point
• Thermoplastic hydrogenated resin
• Wide solubility and compatibility range

• Alcohol-soluble
• Excellent resistance to oxidation
• High acid number
• Very light color

• Alcohol-soluble
• Compatible with UV acrylic adhesives
• Excellent resistance to oxidation
• High acid number
• Improved adhesion to low surface energy substrates
• Medium softening point
• Thermoplastic hydrogenated resin
• Very light color

• Excellent resistance to oxidation
• High softening point
• Light color
• Low odor
• Thermoplastic hydrogenated resin
• Wide solubility and compatibility range

• Contributes to adhesion
• Derived from a natural, renewable source
• Excellent plasticizer
• Fragrance fixative
• Good oxidative stability
• High gloss (high refractive index)
• Low color
• Low odor
• Wide solubility and compatibility range

• Excellent fixative
• Exceptional cutaneous tolerance
• Liquid tackifier and plasticizer resin with excellent ageing characteristics
• Low color
• Low odor
• Wide solubility and compatibility range

• Excellent resistance to oxidation
• Light color
• Low odor
• Medium softening point
• Thermoplastic hydrogenated resin
• Wide solubility and compatibility range

• Color stability
• Exceptionally light color
• High acid number
• Resistant to oxidation
• Wide solubility and compatibility range

Polymer binder that provides a good balance of soft feel and tensile strength

Carboxylated styrene butadiene latex for nonwoven applications

GenFlo 576

Carboxylated styrene butadiene latex. General purpose polymer binder for paper, paperboard, and nonwovens applications.

Carboxylated styrene butadiene latex. General purpose polymer binder for paper, paperboard, and nonwovens applications.

GenFlo 8045 is a hydrophobic binder for carpet backing and nonwoven

Heat-activated in-mold coating designed to enhance the surface of molded parts.

GenGlaze EC-2447 in-mold coating surface finish is incorporated during compression molding instead of being applied separately. It is environmentally friendly as it does not contain solvents (100% solids), and reduces the number of surface finishing steps and manufacturing costs. 

Graphene oxide is a 2D water dispersible derivative of graphene, that has applicability across the construction, coatings, energy storage and polymer additives markets.

H301 is a medium / low molecular weight, solid polyvinyl acetate, developed for use as a thermoplastic low profile additive in unsaturated polyester composites. H301 is a carboxylated polymer which achieves low solution viscosity, efficient compound thickening, very low shrinkage and excellent mould release.

FEATURES

• Rapidly dissolves in most organic solvents including styrene
• High thickening efficiency
• Excellent solution stability and compatibility
• No shrinkage
• High gloss

H301 is manufactured on a dedicated polymerisation plant and is produced in the form of colourless beads.

H302 is a medium / high molecular weight, solid polyvinyl acetate, developed for use in unsaturated polyester composites. H302 is a carboxylated polymer which achieves efficient compound thickening, very low shrinkage and excellent mould release.

FEATURES

Rapidly dissolves in most organic solvents including styrene

High thickening efficiency

Excellent solution stability

No shrinkage

High gloss

H302 is manufactured on a dedicated polymerisation plant and is produced in the form of colourless beads.

H356 is a low molecular weight, solid polyvinyl acetate dibutyl maleate copolymer. It is designed for use as a low profile additive in unsaturated polyester composites, typically in room temperature curing processes.

FEATURES

• Dissolves in most organic solvents including styrene
• Low viscosity styrene solution
• Soft and highly thermoplastic
• Excellent shrinkage control in room temperature cured composites 

H356 is manufactured on a dedicated polymerisation plant and is produced in the form of a melt processable solid.

Water-based acrylic modified resin based on proprietary Emulsifed Binding System (EBS) that provides outstanding adhesion to porous substrate and excellent film formation even in difficult conditions (low temperatrure and high humidity) that ensures excellent durability.

Hydro Pliolite 010 is recommended for flat exterior masonry coatings, pigmented primers or interior tension-free paints.

Acrylate copolymer based on our ABS (Amphoteric Binding System) technology, contains anionic and cationic groups. Blocks many stains, including tannin, marker, and water stains.

Hydro PLIOLITE 050 water-based resin was designed for low VOC stain blocking primers.

Hydro Pliolite 330 is a multiphase pure acrylic copolymer dispersion designed for application on wood . Hydro Pliolite 330 provides an excellent adhesion and enhanced film formation in adverse climatic conditions that allows formulation of weather- and surface-tolerant wood coatings. 

Hydro Pliolite 330 is suitable for formulation of wood stains and wood trim paints.

Synthomer Impera™ performance resin D1606 is an aromatically modified aliphatic resin. Impera D1606 can improve tire performance attributes including rolling resistance, wet grip, and abrasion in tread compounds. Additional performance enhancements can be achieved depending on rubber compound formulation.

Synthomer Impera™ E1501 is a hydrogenated resin. IMPERA E1501 can improve tire performance attributes including rolling resistance, wet grip, and abrasion in tread compounds.  Additional performance enhancements can be achieved depending on rubber compound formulation.

Synthomer Impera™ E1602 is a partially hydrogenated resin. Impera E1602 can improve tire performance attributes including rolling resistance, wet grip, and abrasion in tread compounds.  Additional performance enhancements can be achieved depending on rubber compound formulation.

Synthomer Impera™ E1775 is a hydrogenated resin. Impera E1775 can improve tire performance attributes including rolling resistance, wet grip, and abrasion in tread compounds. Additional performance enhancements can be achieved depending on rubber compound formulation.

Impera™ E1780 is a hydrogenated hydrocarbon resin. Impera™ E1780 resin can improve tire performance attributes including rolling resistance, wet grip, and abrasion in tread compounds. Additional performance enhancements can be achieved depending on rubber compound formulation.

Synthomer IMPERA™ E1850 is a partially hydrogenated resin. IMPERA E1850 can improve tire performance attributes including rolling resistance, wet grip, and abrasion in tread compounds. Additional performance enhancements can be achieved depending on rubber compound formulation.

Synthomer IMPERA™ E1875 is a partially hydrogenated resin. IMPERA E1875 can improve tire performance attributes including rolling resistance, wet grip, and abrasion in tread compounds. Additional performance enhancements can be achieved depending on rubber compound formulation.

Synthomer IMPERA™ P1503 is an aromatic resin. IMPERA P1503 can improve tire performance attributes including rolling resistance, wet grip, and abrasion in tread compounds.  Additional performance enhancements can be achieved depending on rubber compound formulation.

Synthomer IMPERA™ P1504 is an aromatic resin. IMPERA P1504 can improve tire performance attributes including rolling resistance, wet grip, and abrasion in tread compounds.  Additional performance enhancements can be achieved depending on rubber compound formulation.

Synthomer Impera™ P1505 is an aromatic resin. Impera P1505 can improve tire performance attributes including rolling resistance, wet grip, and abrasion in tread compounds.  Additional performance enhancements can be achieved depending on rubber compound formulation.

Synthomer Impera™ R1507 is an aliphatic resin. Impera R1507 can improve tire performance attributes including rolling resistance, wet grip, and abrasion in tread compounds.  Additional performance enhancements can be achieved depending on rubber compound formulation.

Synthomer Impera™ R1608 is an aliphatic resin. Impera R1608 can improve tire performance attributes including rolling resistance, wet grip, and abrasion in tread compounds.  Additional performance enhancements can be achieved depending on rubber compound formulation.

• Excellent thermal stability
• High softening point
• Made from purified aromatic monomers
• Water-white initial color

Kristalex™ 3070 hydrocarbon resin is a water-white, highly color stable, nonpolar, low molecular weight thermoplastic polymer. This resin is compatible with a wide variety of oils, waxes, alkyds, plastics, and elastomers, and is soluble in many common organic solvents. It is indicated for use in plastics modification, adhesives, coatings, sealants, and caulks. The low softening point of Kristalex™ 3070 indicates its potential utility in systems where performance at low temperatures such as frozen food packaging and exterior-use sealants.

In EVA-based hot melt adhesives Kristalex™ 3070 has useful compatibility with EVA grades with up to 30% vinyl acetate and is useful in formulating low-color adhesives with good low temperature properties. In adhesives based on styrenic block copolymers Kristalex™ 3070 is useful in reducing melt viscosity without affecting adhesion and tack properties.

• Excellent thermal stability
• Low softening point
• Made from purified aromatic monomers
• Water-white initial color

• Excellent thermal stability
• Intermediate softening point
• Made from purified aromatic monomers
• Water-white initial color

Kristalex™ 3100 hydrocarbon resin is a water-white, highly color stable, nonpolar, low molecular weight thermoplastic polymer. This resin is compatible with a wide variety of oils, waxes, alkyds, plastics, and elastomers, and is soluble in many common organic solvents. It is indicated for use in plastics modification, adhesives, coatings, sealants, and caulks.

In EVA-based hot melt adhesives Kristalex™ 3100 has useful compatibility with EVA grades with up to 30% vinyl acetate and is useful in formulating low-color adhesives with good low temperature properties. In styrenic block copolymer based adhesives Kristalex™ 3100 preferentially associates with the styrenic endblocks, producing higher room-temperature cohesion without affecting tack and adhesion properties. adhesion properties.

• Excellent thermal stability
• Intermediate softening point
• Made from purified aromatic monomers
• Water-white initial color

• Excellent thermal stability
• Intermediate softening point
• Low odor
• Low organic volatile content
• Made from pure aromatic monomers
• Suitable for use in food contact applications
• Water-white initial color

• Excellent thermal stability
• High softening point
• Low organic volatile content
• Made from pure aromatic monomer
• Water-white initial color

• Excellent thermal stability
• High softening point
• High temperature resistance
• Made from purified aromatic monomers
• Water-white initial color

• Excellent thermal stability
• High softening point
• High temperature resistance
• Low organic volatile content
• Made from pure aromatic monomer
• Water-white initial color

• Low organic volatile content
• Made from pure aromatic monomers
• Suitable for use in food contact applications
• Water-white initial color

• Excellent thermal stability
• Intermediate softening point
• Made from purified aromatic monomers
• Water-white initial color

• Excellent thermal stability
• High softening point
• Made from purified aromatic monomers
• Water-white initial color

• Excellent thermal stability
• Intermediate softening point
• Made from purified aromatic monomers
• Water-white initial color

Lead iodide is a precursor to the perovskite materials used in next-generation solar cell technology. William Blythe manufacture the high purity lead iodide needed for high performing perovskites.

LEWISOL™ 28-M resin is a glycerol ester of rosin modified with maleic anhydride. It is a hard thermoplastic resin that offers excellent solubility, good solvent evaporation and low viscosity in solutions used in formulating RS Nitrocellulose lacquers. These and other properties make LEWISOL™ 28-M resin particularly well suited for use in lacquers, low temperature heat-cured enamels, RS Nitrocellulose based printing inks and grease resistant coatings.

LEWISOL™ 29-M is a stabilized glycerol ester of rosin modified with maleic anhydride. It is a hard thermoplastic resin that offers low color, excellent solubility, good solvent evaporation and low viscosity in solutions used in formulating RS Nitrocellulose lacquers. These and other properties make LEWISOL™ 29-M resin particularly well suited for use in lacquers, low temperature heat-cured enamels, RS Nitrocellulose-based printing inks and grease resistant coatings.

LIPATON GF 3088 is a latex for use as the primer or tack coating in the construction of rubberized running track and sports surfaces.

LIPATON GF 3966 is an adhesive binder used in the construction of rubberized running tracks and sports surfaces.

Finely dispersed aqueous dispersion of a carboxylated styrene-butadiene copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, APEO, solvents and plasticizers.

LIPATON SB 5521 is a hydrophobic and elastic polymer. It is highly recommended for anti-corrosive primers and underbody coatings.

LIPOLAN® T 24H70 is an aqueous dispersion of a reinforced styrene-butadiene copolymer with a high solids content. The emulsifier used is an alkaline salt of fatty acids, which gives the product good stability and foamability. LIPOLAN® T 24H70 was developed for sodium silicofluoride gelled foam rubber backings for tufted carpets. LIPOLAN® T 24H70 can also be used in non-gel foam compounds. Foam rubber backings containing LIPOLAN® T 24H70 are softer than those based on LIPOLAN® T 28H60 and LIPOLAN® T 28H70. The handle of the finished article is influenced mainly by the choice of the precoat.

LITEX LB 420 is a styrene/butadiene copolymer latex for use as a binder in the anode of lithium-ion batteries. It offers excellent mechanical and electrochemical performance.  

LITEX LB 422 is a styrene/butadiene copolymer latex used as a binder in the anode of lithium-ion batteries. It offers a good balance of mechanical properties and processability.

Lithene ultra AL-15MA is a highly viscous, low molecular weight, liquid polybutadiene. It is produced from the low odour base Lithene ultra AL, adducted with 15 parts maleic anhydride. It is used as a highly efficient adhesion promoter in sulphur cured automotive sealants.

TYPICAL APPLICATIONS

Adhesion promoter in automotive sealants and semi structural adhesives

Rubber to metal adhesion promoter

Electrical encapsulants

Lithene ultra AL-15MA is despatched from our UK production plant.

Lithene ultra N4-B-10MA is a viscous, low molecular weight, liquid polybutadiene. The polymer is very low in odour and volatiles and is produced from a broad molecular weight polybutadiene base, adducted with 10 parts maleic anhydride.

TYPICAL APPLICATIONS:

Adhesion promoter in automotive sealants

Soft, isocyanate free electrical encapsulants

Rubber to metal bonding

Formulation of slow release fragrance gels

Lithene ultra N4-B-10MA is despatched from our UK production plant.

TYPICAL APPLICATIONS

Automotive semi structural  adhesives

Hard electrical encapsulants

Coagent in EPDM rubber compounds

Lithene ultra AH is despatched from our UK production plant.

Lithene ultra AL is a viscous low molecular weight, liquid polybutadiene with high content of 1,2 vinyl and cyclic vinyl microstructures. It has low odour and is used as a binder in automotive sealants and in UV cured flexographic printing plates.

TYPICAL APPLICATIONS

Automotive sound damping sealants

Automotive semi structural adhesives

Antifoaming coating additives

Plasticiser for flexographic printing plates

Lithene ultra AL is despatched from our UK production plant.

Lithene ultra N4-5000 is a medium viscosity, narrow molecular weight, liquid polybutadiene with a low content of 1,2 vinyl micro structure. It is extremely low in both odour and volatiles and it can be used as a component in PU mould release formulations or as a base for further chemical modification such as maleinisation.

 TYPICAL APPLICATIONS

Polyurethane foam mould release additive

Dry sand binder

Base polymer for maleinisation

Lithene ultra N4-5000 is despatched from our UK production plant.

Lithene ultra N4-5000-15MA is a highly viscous, low molecular weight, liquid polybutadiene. It is very low in odour and volatiles and is based on a narrow molecular weight polybutadiene adducted with 15 parts maleic anhydride.

TYPICAL APPLICATIONS:

Soft, isocyanate free electrical encapsulants

Adhesion promoter in automotive sealants

Rubber to metal adhesion promoter

Impact modifier for polyester resins

Lithene ultra N4-5000-15MA is despatched from our UK production plant.

Lithene ultra N4-9000 is a viscous, narrow molecular weight liquid polybutadiene with a low content of 1,2 vinyl micro structure. It is extremely low in both odour and volatiles and can be used as a polyurethane additive to improve abrasion resistance.

TYPICAL APPLICATIONS

Polyurethane additive for abrasion resistance

Automotive sound damping sealants & adhesives

Dry sand binder

Lithene ultra N4-9000 is despatched from our UK production plant.

Lithene ultra P4-150P is a highly viscous, low molecular weight, liquid polybutadiene with microstructure containing 1,2 vinyl groups. It is very low in both odour and volatiles and can be used in chlorinated rubber feedstocks or automotive sealants.

TYPICAL APPLICATIONS

Feedstock for chlorinated rubber 

Automotive sound damping sealants & adhesives 

Lithene ultra P4-150P is despatched from our UK production plant.

Lithene ultra P4-25P is a viscous, low molecular weight, liquid polybutadiene with a medium content of 1,2 vinyl microstructure. It is extremely low in both odour and volatiles and can be used as a reactive plasticiser in flexographic printing plates.

TYPICAL APPLICATIONS

Reactive plasticiser in flexographic printing plates

Mould release additive for polyurethane foams

Antifoaming coating additives

Lithene ultra P4-25P is despatched from our UK production plant.

Lithene ultra PH is a viscous, low molecular weight, liquid polybutadiene with a high content of 1,2 vinyl microstructure. It has extremely low odour and volatiles and is used in EPDM rubbers as a coagent and formulation of hard electrical encapsulants.

TYPICAL APPLICATIONS

Coagent in EPDM rubber compounds

Hard electrical encapsulants

Antifoaming coating additive

Reactive plasticiser in UV cure flexographic printing plates

Lithene ultra PH is despatched from our UK production plant.

Lithene ultra PM4 is a low viscosity, low molecular weight, liquid polybutadiene with a medium content of 1,2 vinyl microstructure. It is extremely low in both odour and volatiles and is used as the binder in automotive sound damping sealants, polyurethane mould release systems and solvent based coating additives.

TYPICAL APPLICATIONS

Automotive sound damping sealants

Antifoaming coating additives

Non volatile drying oil in alkyd coatings

Sand binder for paving and moulds

Lithene ultra PM4 is despatched from our UK production plant.

Lithene ultra PM4-7.5MA is a medium viscosity, low molecular weight, liquid polybutadiene. It is very low in odour and volatiles and is produced from Lithene ultra PM4, adducted with 7.5 parts maleic anhydride.

TYPICAL APPLICATIONS

Adhesion promoter in automotive sealants

Rubber to metal adhesion promoter

Soft, isocyanate free electrical encapsulants

Lithene ultra PM4-7.5MA is despatched from our UK production plant.

TYPICAL APPLICATIONS 

Automotive sulphur or peroxide cured sealants & adhesives

Coagent in sulphur or peroxide cured rubbers and elastomers

LitheneActiV 1000 is despatched from our UK production plant.

TYPICAL APPLICATIONS

Reactive plasticiser for flexographic printing plates

Automotive semi structural adhesives

Reactive diluent in solvent based coating systems

LitheneActiV 50 is despatched from our UK production plant.

LUXACAL^TM is a patent-protected doped-tungsten oxide nanomaterial that absorbers in the near-IR region. It is an ideal product for applications that require conversion of light to heat or in sunlight shielding windows.

M25 is a low molecular weight, solid polyvinyl acetate. It is designed for use in solvent based coatings, inks and adhesives or melt extrusion systems.

FEATURES

• Rapidly dissolves in most organic solvents
• Can be melt processed
• Easily plasticised
• Can be combined with other M Grades
• Excellent substrate adhesion & high film flexibility
• Very high light stability

M25 is manufactured on a dedicated polymerisation plant and is produced in the form of colourless beads.

M30 is a low molecular weight, solid polyvinyl acetate. It is designed for use in solvent based coatings, inks and adhesives or melt extrusion systems. M30 can also be used as a low profile additive in unsaturated polyester composites, typically pultrusion and BMC processes.

FEATURES

Rapidly dissolves in most organic solvents.

Can be melt processed.

Easily plasticised.

Can be combined with other M Grades.

Excellent substrate adhesion & film flexibility.

Very high light stability.

M30 is manufactured on a dedicated polymerisation plant and is produced in the form of colourless beads.

M35/73 Solution is a copolymer of vinyl acetate and dibutyl maleate dissolved in ethyl acetate. It is designed for use mainly in solvent based coatings, where it can be diluted for use as a highly efficient primer and sealer.

FEATURES

Miscible with most organic solvents

Very high resistance to hydrolysis

Solution polymer

Rapid penetration and binding

Excellent low temperature heat seal

M35/73 Solution is manufactured on a dedicated polymerisation plant and is produced in the form of a colourless solution.

M40 is a medium molecular weight, solid polyvinyl acetate. It is designed for use in solvent based coatings, inks and adhesives or melt extrusion systems. M40 can also be used as a low profile additive in unsaturated polyester composites, typically pultrusion and BMC processes.

FEATURES

Rapidly dissolves in most organic solvents including styrene

Can be melt processed

Easily plasticised

Can be combined with other M Grades

Excellent low profile performance in BMC & pultrusion processes

M40 is manufactured on a dedicated polymerisation plant and is produced in the form of colourless beads.

M45 is a medium to high molecular weight, solid polyvinyl acetate. It is designed for use in solvent based coatings, inks and adhesives or melt extrusion systems. M45 can also be used as a low profile additive in unsaturated polyester composites, typically pultrusion and BMC processes.

FEATURES

• Rapidly dissolves in most organic solvents including styrene
• Can be melt processed
• Easily plasticised
• Can be combined with other Synthomer M Grades
• Excellent low profile performance in BMC & pultrusion processes

M45 is manufactured on a dedicated polymerisation plant and is produced in the form of colourless beads.

M50 is a medium molecular weight, solid polyvinyl acetate. It is designed for use in solvent based general purpose or parquet adhesives, coatings and inks, melt extrusion systems such as automotive sound damping foils and as a B side carrier in polyester SMC manufacture.

FEATURES

Rapidly dissolves in most organic solvents.

Can be melt processed.

Easily plasticised.

Can be combined with other M Grades.

Excellent adhesion to a wide range of substrates.

Very high UV & light stability.

M50 is manufactured on a dedicated polymerisation plant and is produced in the form of colourless beads.

M60 is a medium high molecular weight, solid polyvinyl acetate. It is designed for use in solvent based coatings, inks and adhesives or melt extrusion systems such as automotive sound damping foils.

FEATURES

Rapidly dissolves in most organic solvents.

Can be melt processed.

Easily plasticised.

Can be combined with other M Grades.

Excellent adhesion to a wide range of substrates.

Very high light and thermal stability.

M60 is manufactured on a dedicated polymerisation plant and is produced in the form of colourless beads.

Magnesium nitrate is a high purity product that can be used in the fertiliser, catalyst and formulation markets.

MCT5 is a low molecular weight, solid copolymer of vinyl acetate and crotonic acid. It is an extremely versatile polymer soluble in both solvent and alkaline aqueous systems.

FEATURES

Rapidly dissolves in most organic solvents

Dissolves in aqueous systems at pH >7.0

Can be melt processed and plasticised

Crosslinkable

Can be combined with other M Grades

Very high adhesion to metals and plastics

High light stability

MCT5 is manufactured on a dedicated polymerisation plant and is produced in the form of clear, slightly yellow granules.

• Alcohol-soluble
• Compatible and miscible with a wide variety of materials
• Excellent surface wetting and adhesion properties
• Liquid plasticizer and tackifier
• Low vapor pressure

Methyl Acetate-Methanol is a good solvent for paint and spirit based coatings.

It can also be used as a precursor for other chemical processes such as acetate production or for conversion to acetic acid whilst recovering methanol.

Acrylic ester used for polymer manufacturing and as a raw material for syntheses.

Molar Mass(g/mol): 86.09

Chemical formula:

Stoichiometric formula: C₄H₆O₂
CAS number: 96-33-3

Floor finish, water-based styrene acrylic, polymer emulsion for ultra-high speed (UHS) maintenance program

Mor-Glo 10 provides a very repairable surface that has a high distinctness of image without compromising the abrasion, soil and shoe scuff resistance associated with high performance floor finishes.

Floor finish, water-based styrene acrylic, polymer emulsion for high traffic applications, such as schools, hospitals and retail.

Mor-Glo 241 very hard and durable zinc crosslinked polymer provides premium performance in high traffic floor areas. It features excellent black heel mark (BHMR), scuff and dirt resistance.

Floor finish, water-based styrene acrylic, polymer emulsion for high traffic applications, such as schools, hospitals and retail.

Mor-Glo 2E very hard and durable zinc crosslinked polymer provides premium performance in high traffic floor areas. It features excellent black heel mark (BHMR), scuff and dirt resistance.

Floor finish, water-based styrene acrylic, polymer emulsion for high traffic applications, such as schools, hospitals and retail.

Mor-Glo 8 zinc crosslinked floor finish polymer is used to make premium, well-balanced floor polishes that provide outstanding dirt resistance, reparability, and response to periodic ultra high speed maintenance.

Floor finish, water-based styrene acrylic, polymer emulsion for industrial, residential and general purpose polishes with good wear resistance.

Mor-Glo 877 general use polymer is frequently recommended for low maintenance floor finishes. It can be used as sole polymer or blended with others.

Floor finish, water-based styrene acrylic, polymer emulsion for industrial, residential and general purpose polishes with good wear resistance.

Mor-Glo 877E general use polymer is frequently recommended for low maintenance floor finishes. It can be used as sole polymer or blended with others.

Floor finish, water-based styrene acrylic, polymer emulsion designed to provide long-term durability and multi-substrate adhesion.

Mor-Glo 878 allows for polishes for multi-substrate adhesion with added ease of stripping and excellent abrasion and wet scrub resistance.

Next generation water-based polymer for long lasting, high performance floor finishes in high traffic environments

MOR-GLO™ DURABLE is a styrene acrylic polymer that delivers durability and extended protection, reducing labor costs and business down-time by decreasing the number of stripping and re-polishing cycles during the life of the floor.

Zinc-free floor finish, water-based styrene acrylic, polymer emulsion for high traffic applications, such as schools, hospitals and retail.

Mor-Glo G128 is recommended for low maintenance floor finishes. It can be easily formulated into EPA Safer Choice, Green Seal and Ecologo certifiable floor finishes.

Zinc-free Twin-Linked^TM, water-based styrene acrylic, polymer emulsion for low or high maintenance floor polish formulations.

Mor-Glo Ultra G zinc-free polymer delivers the durability and performance of premium zinc-containing finishes. It is crosslinked using SYNTHOMER Solutions' Twin-Linked^TM technology to deliver premium durability and performance.

Mor-Shine E NP is a dry-bright polish concentrate with excellent gloss retention, as well as mar and scratch resistance.

Mor-Shine E NP is used for general purpose finishes that respond to low and high maintenance schedules.

Lubricant for nonwovens, textiles, and paper applications.

Acrylic ester used for polymer manufacturing and as a raw material for syntheses.

Molar Mass(g/mol): 128.17

Chemical formula:

Stoichiometric formula: C₇H₁₂O₂

CAS: 141-32-2

• Excellent color stability
• Exceptionally high purity
• Food grade and Kosher tall oil fatty acid-derived oleic acid
• Low odor level & uniform fatty acid composition
• Low saturated acids and unsaponifiables content
• Water-white initial color

• Excellent color stability
• Exceptionally high purity
• Food grade and kosher tall oil fatty acid-derived oleic acid
• Low odor level & uniform fatty acid composition
• Low saturated acids and unsaponifiables content
• Water-white initial color

• Excellent color stability
• Exceptionally high purity
• Low odor level & uniform fatty acid composition
• Low saturated acids and unsaponifiables content
• Water-white initial color

• Excellent color stability
• High oleic acid content
• Low odor level & uniform fatty acid composition
• Low saturated acids and unsaponifiables content
• Pale initial color

• Color stability
• High oleic acid content
• Low odor level & uniform fatty acid composition
• Low saturated acids and unsaponifiables content
• Low titer
• Pale initial color

• High purity, low odor, pale color linoleic acid
• Highly resistant to discoloration on exposure to heat and light
• Low rosin acid content
• Low unsaponifiables
• Very low titer point

• Good initial color and color stability
• High purity linoleic acid
• Low rosin acids and unsaponifiables content
• Very low titer point

• Excellent color stability
• Low odor
• Low rosin acids and unsaponifiables content

• Excellent color stability
• Exceptionally low titer point
• High percentage of conjugated linoleic acid
• Highly reactive and fast-drying derivatives
• Low unsaponifiables
• Pale color

• Direct replacement for dehydrated castor oil in short to medium oil alkyds
• Exhibits excellent color retention on baking and overbaking

• Excellent color stability
• High percentage of conjugated linoleic acid
• Highly reactive and fast-drying derivatives
• Low unsaponifiables
• Pale color

• Exceptionally low titer point
• High percentage of conjugated linoleic acid
• Low odor
• Pale color
• Uniform ratio of cis-trans to tras-trans isomers

• High fatty acid content

• Alcohol-soluble
• Dispersable in water and amine water
• Hard
• Moderate acidity

• Compatible with acrylic resins
• Compatible with RS nitrocellulose
• High hardness
• High gloss
• Soluble in alcohols

• Excellent resistance to oxidation
• High softening point
• Light color
• Low odor
• Thermoplastic hydrogenated resin
• Wide solubility and compatibility range

William Blythe is the world’s leading manufacturer of periodic acid, a product that is purified to ppb levels for the electronics industry.

PERMALYN™ 506-M is a pale, medium-hard, thermoplastic glycerol ester of rosin. It is produced by means of a steam stripping process that yields a low-odor resin. These and other outstanding properties make it particularly useful in Hot Melt adhesives, solvent borne adhesives and wax modification.

• Low acidity and low odor
• Medium softening point
• Wide solubility and compatibility range.
• Provides high tack

PERMALYN™ 496-M is a pale, medium-hard, thermoplastic glycerol ester of rosin. It is produced by means of a steam stripping process that yields a low-odor resin. These and other outstanding properties make it particularly useful in Hot Melt adhesives, solvent borne adhesives and wax modification.

• Low acidity and low odor
• Medium softening point
• Wide solubility and compatibility range.
• Provides high tack

• Low odor
• Medium softening point
• Resistant to thermal degradation
• Thermoplastic resin
• Very good color stability
• Wide solubility and compatibility range

• High softening point
• Low odor
• Resistant to thermal degradation
• Thermoplastic resin
• Very good color stability
• Wide solubility and compatibility range

• High softening point
• Light color
• Low odor
• Resistant to thermal degradation
• Thermoplastic resin
• Very good color stability
• Wide solubility and compatibility range

• Color retention
• High oxidation resistance
  
• High softening point
• Light color
• Minimal odor

• Excellent heat stability
• High softening point
• Low color
• Superior adhesion
• High oxidation resistance

• Light color
• Liquid
• Made from purified aromatic monomers
• Non-migrating plasticizer

Piccolastic™ A75 hydrocarbon resin is a low molecular weight, light colored, polar, hydrocarbon resin derived from pure styrene monomer. Indicated for use in adhesives, coatings, plastics modification and rubber compounding, particularly as primary plasticizers and softeners. Piccolastic™ A75 can be used as a modifier for rubber and plastic compounds used in shoe construction and as a binder for xerographic toners. In styrenic block copolymer-based systems Piccolastic™ A75 associates strongly with the styrene endblocks, reducing melt viscosity and cohesion without greatly affecting tack and adhesion properties.

Piccolastic™ A75 is compatible with EVA grades with 20-40% vinyl acetate and will improve low temperature flexibility and reduce the melt viscosity of the system. Piccolastic™ A75 complies with many FDA regulations for applications involving direct contact with food. Compliance with a given regulation in a specific situation should be verified prior to use in a food contacting application.

• Light color
• Made from pure styrenic monomer

Piccolastic™ D125 hydrocarbon resin is an high molecular weight, light colored, polar, thermoplastic hydrocarbon resin. Derived from pure styrene monomer, it exhibits to a limited degree, properties normally associated with higher polymeric resins - i.e., toughness and resiliency. Although it is hard and tough, it is readily workable, retains some wetting qualities, and provides excellent resistance to water, chemicals, shock, oil, and grease. It can be used as a modifier for rubber and plastic compounds used in shoe construction and as a binder for xerographic toners.

Piccolastic™ D125 is also useful to formulate glues used for solvent welding of styrenic plastics. In styrenic block copolymer-based systems Piccolastic™ D125 associates strongly with the styrene endblocks, reducing melt viscosity and cohesion without greatly affecting tack and adhesion properties. Piccolastic™ D125 is compatible with EVA grades with up to 20% vinyl acetate and will improve heat resistance and increase the melt viscosity of the system. Piccolastic™ D125 complies with many FDA regulations for applications involving direct contact with food. Compliance with a given regulation in a specific situation should be verified prior to use in a food contacting application.

• Light color
• Made from pure styrenic monomer
• Shock resistance

Piccotac™ 1020 hydrocarbon resin solution is an aliphatic, low molecular weight, liquid resin. Derived mainly from olefin monomers of petroleum origin, this pale neutral resin is characterized by its resistance to moisture, good heat and light stability, and excellent balance of tack and adhesive properties. It is stabilized with antioxidant.

It is designed primarily for use in pressure sensitive adhesives, hot melt adhesives and coatings. It is compatible with SIS block copolymers, natural rubber, polyisoprene, butyl rubber, and APO elastomers.

• Aliphatic liquid resin used to increase tack and reduce viscosity
• Excellent adhesion and compatibility to styrene-isoprene-styrene (SIS) block copolymers
• Excellent compatibility in natural rubber
• Excellent tack and peel properties
• Light color, low odor
• Resistance to oxidation

• Aliphatic liquid resin used to increase tack and reduce viscosity
• Excellent adhesion in adhesives with styrene-isoprene-styrene (SIS) block copolymers

• Aliphatic low molecular weight C5 resin
• Excellent adhesion in formulations with styrene-isoprene-styrene (SIS) block copolymers
• Excellent color and stability
• Excellent peel and tack properties

• Aliphatic low molecular weight resin
• Excellent adhesion to styrene-isoprene-styrene (SIS) block copolymers
• Excellent color and color stability
• Excellent peel and tack properties

• Good adhesion to styrene-isoprene-styrene (SIS) block copolymers
• Aliphatic C5 resin
• Excellent adhesion in adhesives with natural rubber
• Excellent color and color stability
• Excellent peel and tack properties

• Aliphatic C5 resin
• Excellent adhesion in formulations with styrene-isoprene-styrene (SIS) block copolymers
• Excellent color and color stability
• Excellent shear strength
• Good balance of tack & peel properties

• Aliphatic C5 resin
• Excellent adhesion in formulations with Natural Rubber
• Excellent color and color stability
• Excellent peel and tack properties
• Good adhesion in formulations with styrene-isoprene-styrene (SIS) block copolymers

• High softening point increases cohesion
• Increased temperature resistance
• Most aliphatic and highest molecular weight of the Synthomer tackifiers

• Allows lower than usual hot melt coating temperatures
• Excellent compatibility and performance in SBS and SEBS block copolymer HMPSA systems
• Excellent compatibility with natural rubber, SBR and polyolefins
• Good balance of peel and shear properties
• Light color, low odor
• Low softening point, good low temperature properties

• Excellent compatibility and performance in styrene block copolymers, natural rubber and SBR
• Light color
• Low odor
• Low softening point, good low temperature properties
• Reduces hot melt coating temperatures of styrenic copolymers

• Aromatic modification to replace tall oil rosin ester
• Excellent cohesion
• Good compatibility with styrene block copolymers, EVA, and many polar elastomers
• Higher cohesion and lower odor than rosin ester
• Light color, low odor
• Promotes low temperature properties
• SBS tackifier

• Excellent balance of peel and shear
• Excellent compatibility with EVA, APO and metallocene polymers for packaging adhesives
• Excellent compatibility with and performance in SIS, and SIS/SBS block copolymer HMPSA systems
• Light color, low odor
• Slightly aromatic character

• Aliphatic resin with a low level of aromatic-modification
• Excellent adhesion in adhesives with styrene-isoprene-styrene (SIS) block copolymers
• Excellent balance of peel and shear
• Excellent compatibility with EVA, APO and metallocene polymers for packaging adhesives
• Excellent peel and tack properties
• Light color, low odor

• Aliphatic resin with a low level of aromatic-modification
• Excellent adhesion to styrene-isoprene-styrene (SIS) block copolymers
• Excellent balance of peel and shear
• Excellent compatibility with EVA, APO and metallocene polymers for packaging adhesives
• Excellent peel and tack properties
• Light color, low odor

• Excellent thermal stability
• Intermediate softening point
• Made from purified aromatic monomers
• Water-white initial color

• Excellent thermal stability
• High softening point
• Made from pure aromatic monomer
• Water-white initial color

• Excellent thermal stability
• Low softening point
• Made from purified aromatic monomers
• Water-white initial color

• Excellent thermal stability
• Intermediate softening point
• Made from purified aromatic monomers
• Water-white initial color

• Excellent pigment wetting
• Excellent resistance to acids, alkalis and moisture
• Liquid plasticizer and tackifier
• Non-reactive
• Soluble in a wide variety of hydrocarbon solvents

• Excellent pigment wetting
• Excellent resistance to acids, alkalis and moisture
• Non-reactive
• Thermoplastic

• Excellent pigment wetting
• Excellent resistance to acids, alkalis and moisture
• Non-reactive
• Reinforcing resin for styrene block copolymers
• Thermoplastic

• Excellent pigment wetting
• Excellent resistance to acids, alkalis and moisture
• Excellent water repellant
• Non-reactive
• Reinforcing resin for styrene block copolymers
• Thermoplastic

• Broad compatibility and solubility
• Non-reactive
• Reinforcing tackifier resin for many polymers used in the adhesive industry

• Broad compatibility and solubility
• Non-reactive
• Reinforcing tackifier resin for many polymers used in the adhesive industry

• Color stability
• High softening point
• Low color
• Made from purified aromatic monomers

• Color stability
• Low color
• Made from purified aromatic monomers
• Very high softening point

• Color stability
• Low color
• Low organic volatile content
• Made from purified aromatic monomer
• Very high softening point

• Color stability
• Excellent compatibility with PP. PE, SEBS and butyl rubbers
• Excellent heat stability
• Low odor and volatility
• Water-white color, fully hydrogenated

PLASTVANCE™ T is a plastic modifier additive for transparent polymers such as polypropylene sheet production utilized in thermoformed articles and other applications.  A typical amount utilized in a final sheet composition is 10 wt. % PLASTVANCE™ T. The more material added the stiffer the final thermoformed proplypropylene product will get.

Maximum benefits require an adjustment of processing conditions such as extrusion and thermoforming temperatures.  Please contact our technical service staff for recommendations on how to utilize PLASTVANCE™ T.

• Good compatibility with polypropylene
• Similar viscosity to polypropylene for thermoforming applications

PLEXTOL 4804 S is an aqueous dispersion of an acrylic copolymer.

Plextol P 7788 is a plasticizer-free water-based dispersion based on acrylic and methacrylic acid esters.

Plextol P 7788 is recommended for Facade and Wall paints with low VOC emissions. It provides good binding power and exterior durability.

PLEXTOL A 2051 an aqueous acrylic emulsion.

PLEXTOL A 412AF is an aqueous dispersion of an acrylic polymer.

PLEXTOL A 6474 is an aqueous dispersion of an acrylic copolymer with heterogeneous particle morphology.

PLEXTOL A 6474 is a binder for exterior and interior clear or pigmented wood coatings.

PLEXTOL B 1071 is a fine particle sized acrylic polymer dispersion designed for use in a wide range of paint formulations. It has outstanding performance especially in premium highly durable exterior paints.

PLEXTOL D 2610 is an aqueous dispersion of an acrylic copolymer.

PLEXTOL D 2610 dispersion is designed for various types of paints, on a wide range of pigment volume concentration (% PVC), from varnish to matt paints.

Finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, solvents, and plasticizers.

PLEXTOL D 487 is a low MFFT self-crosslinking pure acrylic with excellent adhesion on different substrates. It is highly recommended as multi-substrate binder and for universal renovation paints ("house-paints").

Finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. The dispersion contains an anionic emulsifier system and is free from APEOs, film forming aids, solvents and plasticizers.

PLEXTOL D 507 W is a pure acrylic binder with excellent exterior durability and water-whitening resistance. It shows a good blocking and efflorescence resistance. It is recommended for concrete roof-tile renovation paints.

Plextol D 904 is a water-based dispersion based on acrylic and methacrylic acid esters.

Plextol D 904 is mostly advised to formulate Facade coatings with very good water and UV resistance.

It can also be used to formulate Interior paints and Primers for walls.

Plextol  D 977 is a water-based dispersion of acrylic copolymer designed for Elastomeric coatings, roof and walls.

It provides a good balance between mechanical properties and dirt pick-up resistance thanks to the adjusted internal plastification and UV surface curing system.

PLEXTOL L 4801 is an aqueous dispersion of an acrylic copolymer.

Finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. The dispersion contains an anionic emulsifier system, and is free from APEO, coalescing agents, solvents, and plasticizers.

PLEXTOL M 625 is a hard pure acrylic with excellent UV-resistance and exterior durability. It is highly recommended for industrial concrete roof-tile and fibre-cement coatings. It shows an outstanding efflorescence and water-whitening resistance.

Plextol P 7730 is a water-based dispersion acrylic copolymer modified, internally crosslinked and UV-cured.

It is specially designed for Elastomeric wall and roof coatings that provides excellent aging behavior and exhibits low water uptake, alkali resistance and high elongation even at very low temperatures.

Plextol P 7744 is a plasticizer-free water-based dispersion based on acrylic and methacrylic acid esters.

Plextol P 7744 is suitable for the manufacturing of high quality exterior paints with excellent weathering resistance and low dirt pick-up.

Plextol P 7776 is a water-based acrylic dispersion for Exterior facade paints as well as for Semi-gloss to High-gloss wall paints.

Plextol P 7776 provides good exterior durability (color retention for deep-shade paints) and snail trail resistance.

Plextol P 7778 is a plasticizer-free water-based dispersion based on acrylic and methacrylic acid esters.

Plextol P 7778 is specially recommended for the formulation of High gloss paints on several types of substrates providing high wet adhesion, outdoor durability and low dirt pick-up.

It can be also used for Wood stain, Facade coatings and Semi-gloss paints.

Plextol R 100 is a surfactant stabilised modified - acrylic copolymer dispersion that forms a flexible, tough film of high water resistance.

Plextol R 100 is recommended for exterior and interior paints.

PLEXTOL R 4111 is an acrylic polymer dispersion based on APEO free surfactants and designed for use in premium highly durable exterior paint. It does not contain any added formaldehyde. This specially designed acrylic is also suitable for roof coatings.

PLEXTOL R 4135 is a fine particle size modified acrylic polymer dispersion designed for use in durable exterior paints with good water resistance and adequate dirt pick up resistance. 

PLEXTOL R 4135 is a fine particle size modified acrylic polymer dispersion designed for use in durable exterior paints with good water resistance and adequate dirt pick up resistance. 

PLEXTOL R 4164 is acrylic polymer dispersion stabilized by a unique non APEO surfactants system. It exhibits a high blanching resistance to water which makes it perfectly suitable for formulating non whitening clearcoat for floor, stone finishes, wooden surfaces and roof tiles.

Due to its fine particle size, it is best suited for penetrating primer sealer over chalky surfaces which needs reinforcement.

Excellent for interior or exterior colored opaque finishes too.

In addition, suitable for exterior paint with good color retention and moderate dirt pick-up resistant if conscientiously formulated. Exhibit superior pigment binding, suitable for medium to high PVC formulations for interior and exterior coatings.

PLEXTOL R 4184 is an acrylic polymer dispersion based on APEO free surfactants and designed for use in premium highly durable exterior paint. It does not contain any added formaldehyde. This specially designed acrylic is also suitable for roof coatings.

PLEXTOL R 5335 is a fine particle size, surfactant stabilised aqueous acrylic copolymer dispersion. PLEXTOL R 5335 offers high gloss, excellent adhesion and high water resistance.

PLEXTOL R 5335 is recommended for high performance trim paints and wood stains.

PLEXTOL R 5378 is a surfactant stabilised acrylic ester copolymer dispersion.

PLEXTOL R 5441 is a fine particle size, surfactant stabilised aqueous dispersion of a crosslinked methacrylic ester-acrylic ester copolymer. PLEXTOL R 5441 offers high gloss, block resistance, wet ahdesion, alkali and water resitance.

PLEXTOL R 5441 is recommended for low-to-medium build wood stains and semigloss to silky matt wet room coatings.

Plextol R 5512 is a water-based pure acrylic copolymer dispersion mainly recommended for Crack bridging wall paints and highly flexible roof coatings.

Plextol R 5512 provides high flexibility and expceptional water, alkali and dirt pick-up resistance.

It contributes a good balance between mechanical properties and dirt pick-up resistance thanks to the adjusted internal plastification and UV surface curing system.

PLEXTOL R 5530 is a fine particle size, surfactant stabilised aqueous dispersion of a crosslinked methacrylic ester-acrylic ester copolymer. PLEXTOL R 5530 offers good adhesion and salt spray resistance with a very good adhesion to different substrates.

PLEXTOL R 5530 is recommended for anti-corrosion and Direct to Meta applications with excellent salt spray resistance and perfect adhesion to many substrates. Plextol R 5530 is suitable also for multi-substrate primer formulations.

PLEXTOL R 815 is a fine particle size, surfactant stabilised aqueous dispersion of a methacrylic ester-acrylic ester copolymer. PLEXTOL R 815 offers high gloss, block resistance, wet adhesion, alkali and water resistance.

PLEXTOL R 815 is recommended for gloss paints, varnishes and stains.

PLEXTOL R 825 D is a finely dispersed aqueous acrylic copolymer dispersion. The dispersion contains an anionic emulsifier system and is free from APEO, film forming aids, solvents and plasticizers.

PLEXTOL R 825 D is a self-crosslinking multiphase acrylic dispersion. It is highly recommended for gloss and trimpaints. It offers high gloss potential, excellent wet adhesion and good blocking resistance.

Plextol R 825 N is a finely dispersed aqueous acrylic copolymer dispersion. The dispersion contains an anionic emulsifier system and is free from APEO, film forming aids, solvents and plasticizers.

PLEXTOL R 825 N is a self-crosslinking multiphase acrylic dispersion. It is highly recommended for gloss and trimpaints. It offers high gloss potential, excellent wet adhesion and good blocking resistance.

Pure Acrylic copolymer dispersion with fine particle size and excellent UV and water resistance. The product has very good weathering resistance, low dirt pick up and can be used to formulate premium quality coatings for interior and exterior applications.

Plextol 8868 is recommended for high quality architectural coatings suitable for matt to semi gloss formulations, solar reflective coatings.

PLEXTOL RM 1017 is a surfactant stabilised modified - acrylic copolymer dispersion. The dispersion is free from film forming aids, APEO, solvents and plasticizers.

PLEXTOL RM 1017 forms a flexible, tough film of high water resistance. It is recommended for roadmarking paints.

PLEXTOL T 4824A is an aqueous dispersion of an acrylic copolymer.

PLEXTOL UF PR 3500K is an aqueous dispersion of acrylic copolymer with an ultrafine particle size designed in use of primers for  porous masonry and timber substrates. Due to its low film forming temperature and adherent films, primed surfaces are smooth and “keyed in” for the final decorative coating.

PLEXTOL UG 3852 is an ammonia-free aqueous dispersion of an acrylic copolymer.

PLEXTOL UG 3852 is designed for formulating environmentally friendly low odour interior and exterior masonry coatings (façade coatings and synthetic resin plasters).

PLEXTOL ULTRAFINE LS 5000 is an ultra fine particle size, surfactant stabilised aqueous dispersion of a methacrylic ester-acrylic ester and vinyl versatate copolymer with translucent appearance. PLEXTOL ULTRAFINE LS 5000 shows excellent penetration and binding properties especially for surfaces which may be subjected to significant dimensional changes.

PLEXTOL ULTRAFINE LS 5000 is recommended for wood stains formulation for interior and exterior application. 

Cold-polymerized non-carboxylated SB latex for fiber-to-rubber adhesion for tires and rubber products

Industry standard latex for fiber-to-rubber adhesion for tires and rubber products.

Latex for fiber-to-rubber adhesion for tires and rubber products with low-foaming characteristics

Latex with lower VP level for fiber-to-rubber adhesion for tires and rubber products

Latex with lower VP level for fiber-to-rubber adhesion for tires and rubber products

Latex for textile-to-rubber adhesion for tires and rubber products

Latex for fiber-to-rubber adhesion with superior runnability for demanding formulas

Industry standard latex for fiber-to-rubber adhesion for tires and rubber products.

Pliocryl 4526 is an orthophthalic unsaturated polyester solvent-based resin.

Mainly recommended for two-component traffic marking paints, especially pedestrian crossings, parking lots, streets, auxiliary markings.

Pliocryl 4526 provides a good balance of flexibility and hardness after curing, as well as weather and abrasion resistances.

Pliocryl 4526 can be cured at room T by means of the addition of one initiator (e.g. benzoyl peroxide - BP.

As plasticizer agent it's recommended the use of paraffine choride solvents with high temperature resistance.

Pliocryl 4528 is an orthophthalic unsaturated polyester solvent-based resin, pre-accelerated, with extended curing time and diluted in acrylic solvents.

Mainly recommended for two-component traffic marking paints, especially pedestrian crossings, parking lots, streets, auxiliary markings.

Pliocryl 4528 provides a good balance of flexibility and hardness after curing, as well as weather and abrasion resistances.

Pliocryl 4600 is a thermoplastic solvent-based styrene-acrylic copolymer.

It provides extremely fast drying, high hardness and good water resistance properties.

Mainly recommended for traffic marking and floor paints.

Pliocryl 4660 is a thermoplastic solvent-based styrene-acrylic copolymer.

It provides fast drying, good mechanical properties and good water resistance.

Mainly recommended for swimming pools paints as well as floor and traffic marking paints.

Pliocryl XA 2803 is an orthophthalic unsaturated polyester solvent-based resin.

Mainly recommended for two-component traffic marking paints, especially pedestrian crossings, parking lots, streets, auxiliary markings.

Pliocryl XA 2803 provides a good balance of flexibility and hardness after curing, as well as weather and abrasion resistances.

As plasticizer agent it's recommended the use of paraffine choride solvents with high temperature resistance.

Pliolak AF 475 is a Solvent-based medium-oil alkyd resin based on vegetable fatty acids.

Pliolak AF 475 is mainly suitable for the manufacturing of fast-drying industrial enamels. Pliolak AF 475 65 % in Xylene is suitable for the manufacturing of enamels finished with xylene.

It may also be used in forced-drying enamels (between 60 ºC and 100 ºC) as sole binder or in combination with melamine resins.

The resin contains 47% oil and 27% phthalic anhydrid.

Delivery form : (1) 55% in White Spirit/Xylene or (2) 65% in Xylene

Pliolak AF 522 is a Solvent-based medium-oil alkyd resin for decorative coatings, industrial primers and enamels

The resin contains 52% oil and 28% phthalic anhydrid.

Delivery form 60% in D40

Pliolak AF 642 is a Sovent-based long-oil drying alkyd resin based on vegetable fatty acids.

Pliolak AF 642 is used as sole binder or in combination with other alkyd resins for the formulation of decorative enamels and varnishes.

Pliolak AF 642 is also suitable for the production of metal and wood primers and anti-corrosion paints.

The 100% resin contains 64% oil and 24 % Phthalic Anhydride  

Delivery form 60 % in Dearomatized White Spirit

Pliolak AF 654 is a Solvent-based long-oil drying alkyd resin based on vegetable fatty acids.

Pliolak AF 654 is recommended as sole binder or in combination with other alkyd resins for the formulation of decorative enamels and varnishes.

It can also be used for the production of primers and anti-corrosion paints.

The resin contains 65% Oil and 26% Phtalic Anhydride 

Delivery form 70% in D40

Pliolak AF 704  is a High solids, Sovent-based long-oil alkyd resin recommended for decorative coatings.

The resin contains 70% oil 

Delivery form 85% in D40.

Pliolak AH 832 is a Solvent-based long-oil alkyd resin for decorative enamels and varnishes.

The resin contains 83% oil .

100% solids.

Pliolak AM 342 is a Solvent-based short-oil alkyd resin, phenolic and rosin modified for industrial primers and colorful enamels, as well as hammer finishes.

Pliolak AM 342 provides fast drying, high hardness, good metal adhesion and chemical resistance.
Delivery form 50 % in Xylene

Pliolak AS 245 is a Solvent-based short-oil drying alkyd resin based on soya-bean oil.

Pliolak AS 245 is specially recommended for the formulation of fast drying enamels, as well as bitumens and anticorrosive primers. It may also be used as plasticizer in combination with melamine resins for stoving enamels as well as with nitrocellulose and also for acid curing lacquers.

Pliolak AS 245 is suitable for the formulation of two components clear topcoats for wood furniture, in combination with isocyanates.

The 100% resin contains 24 % Oil and 39 % Phthalic Anhydride  

Delivery form 60 % in Xylene

Pliolak AS 284 is a Solvent-based short-oil alkyd resin mainly recommended for industrial enamels, anti-corrosive primers, lacquers and clear topcoats for wood.

The resin contains 22% oil and 40% phthalic anhydrid.

Delivery form 60% in Xylene

Pliolak AS 622 is a Sovent-base long-oil drying alkyd resin based on sunflower oil.

Pliolak AS 622 is recommended as a sole binder or in combination with high solids long-oil alkyd resins for the formulation of decorative enamels and varnishes that fulfill the VOC’s (Volatile Organic Compounds) emissions limits defined in the Directive 42/2004/CE.

Pliolak AS 622 is especially suitable for the formulation of white enamels.

The 100 % resin contains 62 % Oil and 25 % Phthalic Anhydride  

Delivery form 75 % in Dearomatized White Spirit

Pliolak AS 652 is a Solvent-based long-oil alkyd resin that provides good drying time, wrinkling resistance and weathering resistance, with good gloss and color retention.

Pliolak AS 652 is used for decorative coatings, including interior and exterior applications.

The 100% resin contains 65% oil and 23 % Phthalic Anhydride  

Delivery form 75 % in Dearomatized White Spirit

Pliolak AU 520 is a Solvent-based medium-oil urethane alkyd resin for metal paints.

Pliolak AU 520 provides good anti-corrosive properties and adhesion when properly formulated and applied with an appropriate dry film thickness. Use in combination with a long-oil alkyd resin to improve flexibility.

The 100% resin contains 52% oil and 18 % Phthalic Anhydride  

Delivery form 60 % in solvent D40

Pliolak AU 620 is a Solvent-based long-oil urethane alkyd resin for decorative and marine coatings.

Pliolak AU 620 provides improved drying time and hardness as well as high resistance to abrasion and saponification.

The 100% resin contains 62% oil and 12 % Phthalic Anhydride  

Delivery form 60 % in solvent D40

Pliolak AV 303 is a Solvent-based short-oil modified alkyd resin for industrial enamels.

Pliolak AV 303 provides extremely fast drying even in unfavorable climatic conditions.  

The 100% resin contains 30% oil.  

Delivery form 60 % in Xylene.

Pliolite AC4 is a styrene-acrylate copolymer, often used in combination with Pliolite AC80, to form tough abrasion and chemically resistant films that have excellent UV resistance and exterior weathering properties.

Solvent based thixotropic resin for low to high textured exterior masonry coatings, primers, anti-corrosion coatings, concrete protection and intumescent coatings.

Pliolite AC5G is a styrene-acrylate copolymer, often used in combination with Pliolite AC80, to form tough abrasion and chemically resistant films that have excellent UV resistance and exterior weathering properties.

Solvent based pseudoplastic resin for low to high build exterior masonry coatings, primers, anti-corrosion coatings, concrete protection and intumescent coatings.

Pliolite AC80, often used in combination with Pliolite AC4 or Pliolite AC5G,  forms though abrasion and chemically resistant films that have excellent adhesion, UV resistance and exterior weathering properties.

Newtonian resin for exterior masonry coatings, anticarbonation, metal protective and intumescent coatings.

Pliolite AC90 styrene-acrylate copolymer provides excellent water resistence and durability. Its melt rheology and synergy with other intumescent raw materials delivers outstanding char consistency and fire resistance.

Newtonian resin for high performance intumescent coatings.

Pliolite LV 72 is a low viscosity styrene-acrylate copolymer with high pigment binding properties that forms tough, abrasion and alkali resistant films with excellent adhesion to concrete and steel, and with very good water and chemical resistance.

Newtonian resin giving low viscosity solutions, with very good sprayability, for formulation of swimming pool paints and as a replacement for chlorinated rubber.

Pliolite S5E is a styrene-butadiene copolymer that forms tough, abrasion resistant films with excellent chemical, water and alkali resistance.

Newtonian resin for water proofing sealers, masonry primers, concrete curing membranes and road marking paints.

High styrene butadiene resin with a typical styrene/butadiene

ratio of 83 / 17

High styrene butadiene resin with a typical styrene/butadiene ratio of 82.5 / 17.5

Pliolite VTAC-L is a highly soluble, vinyl toluene-acrylate copolymer that forms tough, durable films with excellent adhesion to concrete and steel, with very good water and chemical resistance.

Newtonian resin soluble in mineral spirits, for formulation of flat or textured masonry coatings, alkali resistant primers, anticorrosion paints and intumescent coatings.

PLIOTEC BR 10 is a water-based modified acrylic binder recommended for dead-matt stain resistance applications with excellent scrub resistance.

It provides excellent blocking with high stain resistance capability. PLIOTEC BR 10 provides also an excellent hydrolysis stability. 

Pliotec 115 is a vinyl-acetate resin with excellent adhesion to polyurethane foam and other substrates. It imparts fast drying and ease of application to intumescent coatings used on non-metallic substrates.

Water-borne resin for intumescent coatings for PU foams.

Pliotec 7104C is high Tg styrene acrylic latex that provides excellent adhesion to concrete and resistance to chemicals. It allows formulation of floor coatings that exhibits superior resistance to abrasion and hot tire pick-up.

Pliotec 7104C can be used to formulate garage floor coatings, masonry primers and waterproofing sealers.

Finely dispersed, aqueous dispersion of a acrylic ester-styrene copolymer. The dispersion contains an anionic emulsifier system, is free from film forming aids, APEO, solvents, plasticizers and ammonia.

PLIOTEC AE 3820 is a low MFFT styrene-acrylic dispersion. It is highly recommended for interior and exterior wallpaints. It shows a good scrub-resistance and exterior durability. It is suitable for silicone paints and renders.

Pliotec CR78 self-crosslinking styrene acrylic latex provides excellent chemical resistance, and superior hot-tire pick-up resistance, suitable for low VOC garage floor paints.

Water-based styrene acrylic resin for garage floor paints and institutional wall coverings.

Pliotec CS24 is a water-based modified acrylic and adipic acid dihydrazide-free binder recommended for High gloss wood trim paints.

It provides excellent blocking and cracking resistance with high gloss capability.

Pliotec EL25 acrylic elastomeric latex provides excellent tensile/elongation properties, superior dirt pick-up resistance, great adhesion to concrete und UV resistance.

Water-based elastomeric resin for vertical masonry coatings, roofing and tilt up coatings.

Modified styrene-acrylic copolymer latex based on Hydrophobic Dispersion Technology, with excellent adhesion to metals, and superior water resistance, delivering corrosion protection even without the use of anticorrosive pigments.

Pliotec HDT12 M is recommended for Direct-To-Metal (DTM) coatings, from high gloss enamels to anticorrosive primers.

Pliotec HDT16 M modified styrene-acrylic copolymer latex provides excellent water and corrosion resistance, fast hardness development and superior adhesion to a wide variety of substrates (ferrous and non-ferrous metals, ceramic tiles, PVC and more).

Water-based resin for anti-corrosion paints and primers, Direct-To-Metal (DTM) coatings and multi-surface renovation paints.

Pliotec LEB22 is pure acrylic copolymer with elastomeric properties that ensures superior resistance to exudation (surfactant leaching) and elongation resistance at low temperature. Thanks to its monomeric composition, Pliotec LEB22 demonstrates excellent color retention associated with strong dirt pick-up resistance. "Low Exudation Binder" technology provides improved early rain resistance to coatings.

Unique water-based resin for exterior elastomeric masonry paints, crack-bridging resistant coatings, topcoats for EIFS.

Pliotec LEB20 is pure acrylic copolymer that ensures superior resistance to exudation (surfactant leaching) and efflorescence, with excellent color retention, strong early rain resistance, and superior dirt pick-up resistance.

Unique water-based resin for exterior masonry paints, topcoats for EIFS and house plinths, all-weather paints.

PLIOTEC PA 2453 E is a hard, water resistant, all acrylic emulsion designed for sealing masonry substrates, including concrete roof tiles, with very good UV stability.

PLIOTEC PA 4389 E is a hard, water resistant, all acrylic emulsion designed for sealing masonry substrates, including concrete roof tiles. 

Pliotec PA05 pure acrylic latex with high Tg provides excellent resistance to water, UV and chemicals, very good adhesion to concrete, and hot-tire pick-up resistance.

Water-based resin for high performance coatings, concrete sealers and interior/exterior floor paints.

Finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. The dispersion contains an anionic emulsifier system and is free from APEOs, film forming aids, solvents and plasticizers.

PLIOTEC PA512 is a pure acrylic binder with excellent exterior durability and water-whitening resistance. It shows a good blocking and dirt-pick up resistance. It is recommended for high quality masonry paints including mosaic plasters.

Pliotec PA90 pure acrylic latex provides excellent water and blush resistance, very good weathering and UV resistance, and low coalescing demand.

Water-based resin for pigmented coatings, stains, aggregate binders, and vertical clear coatings.

Pliotec SA35 styrene acrylic latex provides a tough, abrasion-resistant film with excellent early water and humidity resistance. 

Water-based resin for concrete cure-and-seal coatings, tile mastic, and waterproofing sealers.

Pliotec SA40 is styrene acrylic copolymer that provides excellent adhesion to concrete and outstanding resistance to alkali and efflorescence.

Pliotec SA40 is designed to formulate water-based waterproofing sealers, masonry primers, and concrete cure-and-seal products.

Pliotec SC105 self-crosslinking pure acrylic latex provides excellent early water resistance, very good hot tire pick-up resistance, and adhesion to concrete, tile, and wood.

Self-crosslinking resin for concrete and tile sealers, deck coatings, and porch & floor coatings.

Self-crosslinking all-acrylic latex, imparting excellent blush resistance and adhesion to multiple substrates including concrete and tile. It forms a durable film with good hot tire pick-up resistance.

Pliotec SC203 is recommended for clear concrete sealers and floor coatings. It can be formulated into <50 g/L VOC coatings.

Self-crosslinking all-acrylic latex, imparting excellent blush resistance and adhesion to multiple substrates including concrete and tile. It forms a durable film with good hot tire pick-up resistance.

Pliotec SC203E is recommended for concrete sealers and floor coatings. It can be formulated into <50 g/L VOC coatings.

Finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, solvents, and plasticizers.

PLIOTEC SC487 is a low MFFT self-crosslinking pure acrylic with excellent adhesion on different substrates. It is highly recommended as multi-substrate binder and for universal renovation paints (Architectural Coatings).

Plioway EC1 is a substituted styrene-acrylate copolymer soluble in low odour, dearomatized aliphatic solvents. It provides excellent adhesion on a wide variety of substrates, as well as outstanding stain blocking properties.

Newtonian resin for low odour, stain blocking primers, waterproofing sealers, correction fluids and intumescent coatings. 

Plioway ECT is a  partially crosslinked, substituted styrene-acrylate copolymer, soluble in low odour, dearomatized aliphatic solvents, mainly used in combination with Plioway EC1, eliminating the need for external thickeners which can often be detrimental to film performance.

Rheological resin for formulation of low odour stain blocking primers, water proofing sealers, correction fluids and intumescent coatings.

Plioway Ultra 200 is a substituted styrene-acrylate copolymer soluble in odourless isoparaffinic solvents, that forms non-yellowing, tough coatings with excellent adhesion and stain blocking properties.

Highly soluble Newtonian resin for formulation of odourless stain blocking primers, basement water proofing sealers, correction fluids and intumecent coatings.

Plioway Ultra 350LV is a substituted styrene-acrylate copolymer, soluble in odourless isoparaffinic solvents, that form tough, non-yellowing with excellent adhesion and stain blocking properties.

Low viscosity Newtonian resin for formulation of odourless stain blocking primers, basement water proofing sealers, correction fluids, and intumescent coatings.

Plioway Ultra G20 is a substituted styrene-acrylate copolymer, soluble in odourless  isoparaffinic solvents and used in combination with Plioway Ultra 200 or Ultra 350LV, eliminating the need for external thickeners which can often be detrimental to film performance.

Pseudoplastic rheological resin for formulation of odourless stain blocking primers, basement water proofing sealers, correction fluids and intumescent coatings.

• Alcohol-soluble
• High softening point
• Non-crystalline
• Resistant to oxidation
• Thermoplastic rosin acid

Our potassium iodate meetings the requirements of the Food Chemicals Codex and therefore can be used in the food manufacturing industry, alongside applications in light polarisation filters and chemical manufacturing.

High purity potassium iodide product that has use in the pharmaceutical industries, food & feed, polymer additives and electronics markets.

Regalflex™ Amorphous Polyolefins (APOs) are characteristically saturated, low molecular weight, propylene-based olefin polymers. These products are inherently soft, tacky, and flexible, having a broad compatibility with numerous elastomers, polymers, and tackifying resins. Regalflex™ APOs are characterized by consistent quality, low odor, good heat stability, and low color. Regalflex™ E1003 is a copolymer of propylene and ethylene having a melt viscosity of 300 mPa·s at 190°C.

• Broad compatibility with numerous elastomers, polymers, and tackifying resins
• Broad temperature service range
• Excellent thermal and UV stability
• Excellent water and moisture resistance
• Low color
• Low odor

• Broad compatibility with numerous elastomers, polymers, and other tackifying resins
• Broad temperature service range
• Excellent thermal and UV stability
• Excellent water and moisture resistance
• Low color
• Low odor

• Broad compatibility with numerous elastomers, polymers, and tackifying resins
• Broad temperature service range
• Excellent thermal and UV stability
• Excellent water and moisture resistance
• Low color
• Low odor

• Broad compatibility with numerous elastomers, polymers, and tackifying resins
• Broad temperature service range
• Excellent thermal and UV stability
• Excellent water and moisture resistance
• Low color
• Low odor

• Broad compatibility with numerous elastomers, polymers, and tackifying resins
• Broad temperature service range
• Excellent thermal and UV stability
• Excellent water and moisture resistance
• Low color
• Low odor

• Broad compatibility with numerous elastomers, polymers, and tackifying resins
• Broad temperature service range
• Excellent thermal and UV stability
• Excellent water and moisture resistance
• Low color
• Low odor

• Broad compatibility with numerous elastomers, polymers, and tackifying resins
• Broad temperature service range
• Excellent thermal and UV stability
• Excellent water and moisture resistance
• Low color
• Low odor

• Broad compatibility with numerous elastomers, polymers, and tackifying resins
• Broad temperature service range
• Convenient product form
• Excellent thermal and UV stability
• Excellent water and moisture resistance
• Low color
• Low odor

• Broad compatibility with numerous elastomers, polymers, and tackifying resins
• Broad temperature service range
• Convenient product form
• Excellent thermal and UV stability
• Excellent water and moisture resistance
• Low color
• Low odor

• Broad compatibility with numerous elastomers, polymers, and tackifying resins
• Broad temperature service range
• Convenient product form
• Excellent thermal and UV stability
• Excellent water and moisture resistance
• Low color
• Low odor

• Broad compatibility with numerous elastomers, polymers, and tackifying resins
• Broad temperature service range
• Excellent thermal and UV stability
• Excellent water and moisture resistance
• Low color
• Low odor

• Broad compatibility with numerous elastomers, polymers, and tackifying resins
• Broad temperature service range
• Excellent thermal and UV stability
• Excellent water and moisture resistance
• Low color
• Low odor

• Broad compatibility with numerous elastomers, polymers, and tackifying resins
• Broad temperature service range
• Excellent thermal and UV stability
• Excellent water and moisture resistance
• Low color
• Low odor

• Broad compatibility with numerous elastomers, polymers, and tackifying resins
• Broad temperature service range
• Convenient product form
• Excellent thermal and UV stability
• Excellent water and moisture resistance
• Low color
• Low odor

• Broad compatibility with numerous elastomers, polymers, and tackifying resins
• Broad temperature service range
• Excellent thermal and UV stability
• Excellent water and moisture resistance
• Low color
• Low odor

• Broad compatibility with numerous elastomers, polymers, and tackifying resins
• Broad temperature service range
• Convenient product form
• Excellent thermal and UV stability
• Excellent water and moisture resistance
• Low color
• Low odor

• Broad compatibility with numerous elastomers, polymers, and tackifying resins
• Broad temperature service range
• Convenient product form
• Excellent thermal and UV stability
• Excellent water and moisture resistance
• Low color
• Low odor

• Broad compatibility with numerous elastomers, polymers, and tackifying resins
• Broad temperature service range
• Excellent thermal and UV stability
• Excellent water and moisture resistance
• Low color
• Low odor

• Broad compatibility with numerous elastomers, polymers, and other tackifying resins
• Broad temperature service range
• Excellent thermal and UV stability
• Excellent water and moisture resistance
• Low color
• Low odor

• Broad compatibility with numerous elastomers, polymers, and tackifying resins
• Broad temperature service range
• Convenient product form
• Excellent thermal and UV stability
• Excellent water and moisture resistance
• Low color
• Low odor

• Broad compatibility with numerous elastomers, polymers, and tackifying resins
• Broad temperature service range
• Convenient product form
• Excellent thermal and UV stability
• Excellent water and moisture resistance
• Low color
• Low odor

• Broad compatibility with numerous elastomers, polymers, and other tackifying resins
• Broad temperature service range
• Excellent thermal and UV stability
• Excellent water and moisture resistance
• Low color

• Broad compatibility with numerous elastomers, polymers, and tackifying resins
• Broad temperature service range
• Convenient product form
• Excellent thermal and UV stability
• Excellent water and moisture resistance
• Low color
• Low odor

• Broad compatibility with numerous elastomers, polymers, and tackifying resins
• Broad temperature service range
• Convenient product form
• Excellent thermal and UV stability
• Excellent water and moisture resistance
• Low color
• Low odor

• Broad compatibility with numerous elastomers, polymers, and tackifying resins
• Broad temperature service range
• Convenient product form
• Excellent thermal and UV stability
• Excellent water and moisture resistance
• Low color
• Low odor

• Broad compatibility with numerous elastomers, polymers, and tackifying resins
• Broad temperature service range
• Convenient product form
• Excellent thermal and UV stability
• Excellent water and moisture resistance
• Low color
• Low odor

• Broad compatibility with numerous elastomers, polymers, and tackifying resins
• Broad temperature service range
• Convenient product form
• Excellent thermal and UV stability
• Excellent water and moisture resistance
• Low color
• Low odor

Regalite™ C6100 hydrocarbon resin is a very light color, partially hydrogenated, modified aliphatic resin designed as an excellent tackifier for the midblock of thermoplastic block copolymers, including styrene-isoprene-styrene (SIS), [low, medium, and high styrene content] styrene ethylene butylene styrene (SEBS) and styrene-butadiene-styrene (SBS). It also shows excellent compatibility with ethylene vinyl acetate (EVA). Regalite™ C6100 is recommended for use in a variety of hot melt adhesives, including nonwoven assembly, packaging, bookbinding, glue sticks, and pressure-sensitive tape and label adhesives.

• Excellent heat stability
• Water-white color
• Wide compatibility

• Excellent heat color stability
• Low volatility
• Water-white color
• Wide compatibility

• Excellent heat stability
• Water-white color
• Wide compatibility

• Excellent heat stability
• Water-white color
• Wide compatibility

• Contributes to adhesion and transfer resistance
• Forms clear, glossy films
• Resistant to thermal and oxidative degradation
• Soluble in non-polar liquids
• Water-white color

Regalite™ R1100 hydrocarbon resin is a low molecular weight fully hydrogenated, water-white, inert, thermoplastic resin derived from petrochemical feedstocks. This resin is especially designed as tackifier in hot-melt adhesives requiring excellent color retention upon aging.

• Excellent heat and UV stability
• Water-white color
• Wide compatibility

Regalite™ R1125 hydrocarbon resin is a low molecular weight fully hydrogenated water-white inert thermoplastic resin derived from petrochemical feedstocks. This resin is particularly useful as tackifier for hot melt systems based on EVA copolymers and SIS block copolymers.

Regalite™ R7100 hydrocarbon resin is a partially hydrogenated water-white inert thermoplastic resin derived from petrochemical feedstocks. This resin is especially designed as a tackifier in hot melt adhesives based on SBS block copolymers, providing excellent color retention upon aging.

Regalite™ S1100 hydrocarbon resin is a low molecular weight fully hydrogenated water-white thermoplastic resin derived from petrochemical feedstock. This resin is especially designed as tackifier in hot melt adhesives requiring good color retention upon ageing.

Regalite™ S5090 hydrocarbon resin is an unique partially hydrogenated water-white inert thermoplastic resin derived from petrochemical feedstock.

• Good compatibility with styrene block copolymers, EVA, and many polar elastomers
• SBS tackifier
• Very good resistance to thermal and oxidative degradation
• Water-white initial color

Regalite™ S7125 hydrocarbon resin is a partially hydrogenated water-white inert thermoplastic resin derived from petrochemical feedstocks. This resin is especially designed as a tackifier in hot melt adhesives based on EVA, SIS and SBS copolymers, providing low odor and good color retention upon ageing.

• Improved resistance to heat and oxidation
• Low odor
• Low organic volatile content
• Low trace chemicals
• Water-white initial color

• Excellent heat stability
• Improved resistance to oxidation
• Low odor
• Low organic volatile content
• Low trace chemicals
• Water-white initial color

• Excellent heat stability
• Improved resistance to oxidation
• Low odor
• Low organic volatile content
• Low trace chemicals
• Water-white initial color

• Excellent thermal and UV stability
• Fully hydrogenated
• Highly stable
• Liquid
• Water-white color

• Excellent thermal and UV stability
• Fully hydrogenated
• Highly stable
• Low odor
• Water-white color

• Excellent thermal and UV stability
• Fully hydrogenated
• Highly stable
• Provides excellent barrier properties and low oxygen permeability
• Water-white color

• Excellent thermal and UV stablity
• High aromatic content
• Highly stable
• Low color
• Partially hydrogenated
• Water-white color

• Excellent thermal and UV stability
• Highly stable
• Low odor
• Partially hydrogenated
• Water-white color
• Wide compatibility

Regaltac™ C-100L Resin is a tackifier resin with a softening point of 100°C and a molten Gardner color of 2.

Broad compatibility with numerous elastomers, polymers, and tackifying resins

• Consistent quality
• Excellent heat stability
• Light color
• Low odor

• Broad compatibility with numerous elastomers, polymers, and tackifying resins
• Consistent quality
• Excellent heat stability
• Low odor

• Broad compatibility with numerous elastomers, polymers, and tackifying resins
• Consistent quality
• Excellent heat stability
• Light to water-clear color
• Low odor

• Broad compatibility with numerous elastomers, polymers, and other tackifying resins
• Consistent quality
• Excellent heat stability
• Light to water-clear color
• Low odor

• Broad compatibility with numerous elastomers, polymers, and other tackifying resins
• Consistent quality
• Excellent heat stability
• Light color
• Low odor

• Broad compatibility with numerous elastomers, polymers, and other tackifying resins
• Consistent quality
• Excellent heat stability
• Low odor

• Broad compatibility with numerous elastomers, polymers, and tackifying resins
• Consistent quality
• Excellent heat stability
• Light to water-clear color
• Low odor

• Broad compatibility with numerous elastomers, polymers, and tackifying resins
• Consistent quality
• Excellent heat stability
• Light color
• Low odor

• Broad compatibility with numerous elastomers, polymers, and other tackifying resins
• Consistent quality
• Excellent heat stability
• Low odor

• Broad compatibility with numerous elastomers, polymers, and other tackifying resins
• Consistent quality
• Excellent heat stability
• Light color
• Low odor

• Broad compatibility with numerous elastomers, polymers, and other tackifying resins
• Consistent quality
• Excellent heat stability
• Low odor

• Broad compatibility with numerous elastomers, polymers, and other tackifying resins
• Consistent quality
• Excellent adhesion in SEBS and butyl sealants
• Excellent heat stability
• Low odor
• Water-white color

• Broad compatibility with numerous elastomers, polymers, and other tackifying resins
• Consistent quality
• Excellent heat stability
• Low odor

• Broad compatibility with numerous elastomers, polymers, and other tackifying resins
• Consistent quality
• Excellent heat stability
• Light color
• Low odor

• Broad compatibility with numerous elastomers, polymers, and other tackifying resins
• Consistent quality
• Excellent heat stability
• Low odor

• Broad compatibility with numerous elastomers, polymers, and other tackifying resins
• Consistent quality
• Excellent heat stability
• Low odor

• Broad compatibility with numerous elastomers, polymers, and other tackifying resins
• Consistent quality
• Excellent heat stability
• Light color
• Low odor

• Broad compatibility with numerous elastomers, polymers, and other tackifying resins
• Consistent quality
• Excellent heat stability
• Low odor

• Broad compatibility with numerous elastomers, polymers, and other tackifying resins
• Consistent quality
• Excellent heat stability
• Low odor
• Water-white color

• Broad compatibility with numerous elastomers, polymers, and other tackifying resins
• Consistent quality
• Excellent compatibility with SEBS and butyl rubbers
• Excellent heat stability
• Low odor

• Broad compatibility with numerous elastomers, polymers, and other tackifying resins
• Consistent quality
• Excellent compatibility with SEBS and butyl rubbers
• Excellent heat stability
• Low odor and volatility
• Water-white color

• Broad compatibility with numerous elastomers, polymers, and tackifying resins
• Consistent quality
• Good heat stability
• Low odor

• Broad compatibility with numerous elastomers, polymers, and tackifying resins
• Consistent quality
• Good heat stability
• Low odor

Resipur 2100 is an orthophthalic unsaturated polyester resin of high reactivity.

Resipur 2100 is supplied as a transparent slightly yellow liquid that is free of impurities.

DELIVERY FORM: Approx. 60 % of polymer diluted in styrene.

Resipur 2138 is an orthophthalic unsaturated polyester resin of high reactivity.

Resipur 2138 is a transparent light yellow liquid that is free of impurities.

DELIVERY FORM: Approx. 64 % of polymer diluted in styrene.

Resipur 2208 is an orthophthalic unsaturated polyester resin of high reactivity. 

Resipur 2208 is a transparent slightly yellow liquid that is free of impurities.

DELIVERY FORM: Approx. 68 % of polymer diluted in styrene.

Resipur 4246 is an isophthalic/NPG unsaturated polyester resin of low reactivity.  Resipur 4246 is a violet liquid that is free of impurities.

DELIVERY FORM: Approx. 68 % of polymer diluted in styrene and acrylic Monomers. 

Resipur 5103 is an isophthalic unsaturated polyester resin of medium reactivity.

Resipur 5103 is a transparent yellow liquid that is free of impurities.

Resipur 5103 has high chemical resistance.

Resipur 5103 is used in laminate surfaces that have contact with food. 

DELIVERY FORM: Approx. 62 % of polymer diluted in styrene.

Resipur 5166 is an isophthalic unsaturated polyester resin of high reactivity, pre-accelerated and thixotropic.

Resipur 5166 is an opaque pink liquid that is free of impurities.

Resipur 5166 is certified for naval construction by Lloyd’s Register.

DELIVERY FORM:

RESIPUR 5166: Approx. 54 % of polymer diluted in styrene.

Resipur 5169 is an isophthalic unsaturated polyester resin of high reactivity, pre-accelerated and thixotropic.

Resipur 5169 is an opaque pink liquid that is free of impurities.

Resipur 5169 is certified for naval construction by Lloyd’s Register.

DELIVERY FORM:

RESIPUR 5169: Approx. 55 % of polymer diluted in styrene.

Resipur 6560 is an orthophthalic unsaturated polyester resin, pre-accelerated and thixotropic.

Resipur 6560 is an opaque pink liquid, free of impurities.

DELIVERY FORM: Approx. 58 % of polymer diluted in styrene and acrylic monomers.

Resipur 9107 is an orthophthalic unsaturated polyester resin of medium reactivity.

Resipur 9107 is a transparent yellow liquid, free of impurities.

Resipur 9107 is used in laminate surfaces that have contact with food. 

DELIVERY FORM: Approx. 66 % of polymer diluted in styrene.

Resipur 9112 is an orthophthalic unsaturated polyester resin of medium reactivity.

Resipur 9112 is a clear blue liquid, free of impurities.

Resipur 9112 has high stability to UV radiation.

DELIVERY FORM: Approx. 62 % of polymer diluted in styrene.

Resipur 9166 is an orthophthalic unsaturated polyester resin of medium reactivity, pre-accelerated and thixotropic.

Resipur 9166 is an opaque pink liquid, free of impurities.

Resipur 9166 is certified for naval construction by Lloyd’s Register.

DELIVERY FORM:

RESIPUR 9166: Approx. 59 % of polymer diluted in styrene.

Resipur 9168 is an orthophthalic unsaturated polyester resin of medium reactivity, pre-accelerated and thixotropic.

Resipur 9168 is an opaque pink liquid, free of impurities.

Resipur 9168 is certified for naval construction by Lloyd’s Register.

DELIVERY FORM:

RESIPUR 9168: Approx. 58 % of polymer diluted in styrene.

Resipur 9175 is an orthophthalic unsaturated polyester resin of medium reactivity, pre-accelerated and thixotropic.

Resipur 9175 is an opaque blue liquid, free of impurities.

Resipur 9175 contains a peroxide indicator. 

DELIVERY FORM:

RESIPUR 9175: Approx. 58 % of polymer diluted in styrene.

Resipur 9189 is an orthophthalic unsaturated polyester resin of medium reactivity, pre-accelerated and thixotropic.

Resipur 9189 is supplied as an opaque pink liquid that is free of impurities.

Resipur 9189 emits low amounts of styrene during the curing process. As such Resipur 9189 has an improved environmental profile.

DELIVERY FORM:

RESIPUR 9189 Approx. 59 % of polymer diluted in styrene.

Resipur 9312 is an orthophthalic unsaturated polyester resin with medium reactivity.

Resipur 9312 is a brilliant yellow liquid, free of impurities.

DELIVERY FORM: Approx. 72 % of polymer diluted in styrene.

Resipur 9318 is an orthophthalic unsaturated polyester resin with medium reactivity.

Resipur 9318 is a transparent liquid, free of impurities.

DELIVERY FORM: Approx. 68 % of polymer diluted in styrene.

Resipur 9350 is an orthophthalic unsaturated polyester resin with medium reactivity and thixotropic.

Resipur 9350 is an opaque yellow to slightly green liquid, free of impurities.

DELIVERY FORM: Approx.70 % of polymer diluted in styrene.

Resipur 9801 is an orthophthalic unsaturated polyester resin with medium reactivity.

Resipur 9801 is a transparent yellow liquid, free of impurities.

Resipur 9801 has high stability to UV radiation.

Resipur 9801 can be used in cultured marble surfaces that have contact with food. 

DELIVERY FORM: Approx. 66 % of polymer diluted in styrene.

Resipur 9805 is an orthophthalic unsaturated polyester resin with low reactivity which contains paraffin.

Resipur 9805 is a transparent yellow liquid, free of impurities.

DELIVERY FORM:

RESIPUR 9805: Approx. 65 % of polymer diluted in styrene.

Resipur 9806 is an orthophthalic unsaturated polyester resin with low reactivity which contains paraffin.

Resipur 9806 is a transparent yellow liquid, free of impurities.

DELIVERY FORM:

RESIPUR 9806: Approx. 68 % of polymer diluted in styrene.

Resipur 9844 is an orthophthalic unsaturated polyester resin with low reactivity and pre-accelerated and with low viscosity.

Resipur 9844 is a transparent pink liquid, free of impurities.

DELIVERY FORM: Approx. 61.5 % of polymer diluted in styrene.

Styrene-acrylic copolymer dispersion with fine particle size and excellent water and weather weather resistance. It includes self crosslinking system and exhibits outstanding adhesion to concrete surfaces. It is suitable as an universal binder for variety of architectural applications

Revacryl 246 is recommended for primers, high PVC paints, egg shell to semi gloss finish, roof coatings and textures  

REVACRYL AE 3020 is an aqueous dispersion of an acrylic ester-styrene copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, APEO, solvents and plasticizers.

REVACRYL AE 3020 is a low MFFT silane-modified styrene-acrylic with excellent wet adhesion and water-resistance. It shows high flexibility and is recommended for roof-coatings. 

REVACRYL AE 3020 is a finely dispersed, aqueous dispersion of an acrylic ester-styrene copolymer designed for construction applications including waterproofing and ceramic tile adhesives.

The dispersion contains an anionic emulsifier system and is free from film forming aids, solvents and plasticizers.

A soft Styrene Acrylic coploymer dispersion with excellent elastomeric and crackbridging properties. Revacryl 3020 is silinated hence posses excellent water resistance. It is suitable for a variety of roofing applications

Revacryl AE 3020JA is recommended for roof coatings, 1K waterpoofing membranes, CTA, caulks and sealants.

Finely dispersed, aqueous dispersion of a acrylic ester-styrene copolymer. The dispersion contains an anionic emulsifier system, is free from film forming aids, APEO, solvents, plasticizers and ammonia.

REVACRYL AE 3723 is a low MFFT styrene-acrylic dispersion with very low VOC content (< 300 ppm) and low residual monomer content. It is highly recommended for interior and exterior wallpaints, especially low emission and ecolabel compliant products. It shows a good exterior durability and high saponification resistance.

REVACRYL AE 3723 is a finely dispersed, aqueous dispersion of an acrylic ester-styrene copolymer for construction applications including tile adhesives.

REVACRYL AE 3723  contains an anionic emulsifier system and is free from film forming aids, APEO, solvents, plasticizers and ammonia. It has a very low VOC content (< 300 ppm) and is highly recommended for ecolabel compliant products. 

REVACRYL AE 3737 is a finely dispersed, aqueous dispersion of an acrylic ester-styrene copolymer designed for construction applications including waterproofing and ceramic tile adhesives.

The dispersion contains an anionic emulsifier system and is free from film forming aids, solvents, plasticizers and ammonia.

Finely dispersed, aqueous dispersion of an acrylic ester-styrene copolymer. The dispersion contains an anionic emulsifier system, is free from film forming aids, APEO, solvents, plasticizers, and ammonia.

REVACRYL AE 3737 is a low MFFT styrene-acrylic dispersion with high water-resistance, excellent wet adhesion and good flexibility. It is highly recommended for ETICS-primers and renders.

Finely dispersed, aqueous dispersion of a acrylic ester-styrene copolymer. The dispersion contains an anionic emulsifier system, is free from film forming aids, APEO, solvents, plasticizers and ammonia.

REVACRYL AE 3820 is a low MFFT styrene-acrylic dispersion. It is highly recommended for interior and exterior wallpaints. It shows a good scrub-resistance and exterior durability. It is suitable for silicone paints and renders.

Finely dispersed, aqueous dispersion of a acrylic ester-styrene copolymer. The dispersion contains an anionic emulsifier system, is free from film forming aids, APEO, solvents, plasticizers and ammonia.

REVACRYL AE 3820S is a low MFFT styrene-acrylic dispersion. It is highly recommended for interior and exterior wallpaints. It shows a good scrub-resistance and exterior durability. It is suitable for silicone paints and renders.

REVACRYL AE 4522 is a specially modified, aqueous dispersion of a styrene-acrylic ester copolymer for waterproofing and tile adhesive applications. The polymer is engineered for excellent wet adhesion.

REVACRYL AE 4522 contains an anionic emulsifier system and is free from film forming aids, solvents and plasticizers.

REVACRYL AE 4522 is a standard MFFT modified styrene-acrylic dispersion. It shows excellent wet adhesion and high water- and blocking resistance.

REVACRYL AE 4522 is highly recommended for adhesion primers on ETICS and mineral substrates. 

REVACRYL AE 4522 K is a specially modified, aqueous dispersion of a styrene-acrylic ester copolymer for waterproofing, primer and tile adhesive applications. The polymer is engineered for excellent wet adhesion.

REVACRYL AE 4522 K contains an anionic emulsifier system and is free from film forming aids, solvents and plasticizers.

Styrene Acrylic dispersion with highly thixotropic rheology profile. It has excellent adhesion to masonary substrates and deliveres good overall performaces in matt to semi gloss architectural coatings

Revacryl 4620JA is recommended for primers, matt and semi gloss coatings and is also suitable for textured coatings

REVACRYL AE 4625 is a finely dispersed, aqueous dispersion of an acrylic ester-styrene copolymer.

REVACRYL AE 4625 is a finely dispersed, aqueous dispersion of a styrene-acrylic ester copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, solvents, plasticizers and ammonia.

REVACRYL AE 4625 is a standard MFFT styrene-acrylic dispersion. It shows good exterior durability and very good blocking- and water-resistance. It is highly recommended for the formulation general purpose construction sealants.

Finely dispersed aqueous dispersion of a styrene-acrylic ester copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, APEO, solvents and plasticizers.

REVACRYL AE 6030 is a hydrophobic styrene-acrylic dispersion. It shows an excellent adhesion to various metal substrate and a high water-resistance. It is highly recommended for anti-corrosive primers and non-decorative metal monocoats.

Revacryl DS 2100 is an ammonia free, water-based dispersion of a styrene-acrylic copolymer. It can be used in a broad range of coating applications with well-balanced performance envelope.

It's suitable for formulation of indoor mat, silk and semi-gloss paints and Masonry facade paints, with or without silicone emulsion.

REVACRYL L 3783 is an anionic stabilised aqueous dispersion of a styrene-acrylic copolymer.

REVACRYL L 3783 is suitable for a wide range of interior and exterior wall applications.

Revacryl L 3790 is an ammonia free, water-based dispersion of styrene-acrylic copolymer, suitable for a wide range of interior and exterior coating applications.

The very high binding power and good resistance to water, saponification, alkaline and weathering of Revacryl L 3790 make it a multipurpose product. 

REVACRYL L 8705 is an aqueous high bonding power styrene acrylic copolymer, based on APEO free surfactants and does not contain formaldehyde releasing biocides. This dispersion is free from ammonia.

REVACRYL L 8705 is suitable for 2-component flexible seal elastic adhesive mortars, cement-based formulations, isolating flexible coatings and gap filling elastic formulating systems. 

Revacryl P 7600 is a water-based styrene acrylic copolymer developed for Elastomeric Wall and Roof coatings.

It is also recommended for Texture coatings and Silicate paints.

Revacryl P 7600 provides high elongation at break, low water uptake and effective water impermeability.

Revacryl P 7602 is a plasticizer-free water-based dispersion based on acrylic acid esters and styrene.

Revacryl P 7602 is recommended for the manufacturing of Elastomeric Wall and Roof coatings. It is also suitable to produce Resin-bound plasters, Textured coatings and Silicate paints and Plasters.

Revacryl P 7693 is a water-based dispersion based on acrylic acid esters and styrene, APEO and ammonia free.

Revacryl P 7693 is a new generation binder specially developed for the formulation of high PVC interior paints. 

It may also be used to manufacture Exterior paints.

Revacryl P 7699 is a plasticizer-free water-based dispersion based on acrylic acid esters and styrene.

Revacryl P 7699 is especially suitable for manufacturing paints with low VOC content, from Mat to Semi-gloss interior paints, as well as the deep shade paints.

Revacryl P 7699 allows the formulation of paints without the need of coalescing agents to reduce the minimum film formation temperature. 

It can also be used as a binder for the formulation of aqueous primers.

REVACRYL R 245 is a fine particle size, surfactant stabilised aqueous dispersion of a styrene and methacrylic ester-acrylic ester copolymer. REVACRYL R 245 offers excellent alkali resistance and water resistance with very high pigment binding characteristics.

REVACRYL R 245 is recommended for high quality interior and exterior paints. REVACRYL R 245 is also suitable in the following applications: - Ready mixed fillers and ceramic tile adhesives - Cartridge applied Caulks/sealants and building adhesives.

REVACRYL R 4317 AF is a styrene acrylic polymer dispersion based on APEO free surfactants and designed for two components cementitious formulations.

REVACRYL R 4317 AF would improve the elongation, tensile strength and durability of cementitious waterproofing paint.

REVACRYL R 4324 AF is a high solids, styrene acrylic polymer dispersion which displays a highly flexible yet water resistant film. 

It has been developed for use in cement based applications such as admixtures and surface patching compounds where flexibility is desirable.

REVACRYL R 4325 is a styrene acrylic polymer dispersion based on non APEO surfactants and designed for two pack cement based formulations.

REVACRYL R 4325 would improve the waterproofing properties, adhesion, strength and durability of cement-based products.

REVACRYL R 4332 is a styrene-acrylic polymer dispersion based on APEO free surfactants. It does not contain any added formaldehyde or ammonia.

Designed for a wide range of primer and finish coatings applications. 

REVACRYL R 4332 is a styrene-acrylic polymer dispersion based on APEO free surfactants. It does not contain any added formaldehyde or ammonia.

Designed for a wide range of primer and finish coatings applications. 

REVACRYL R 4343 is a APEO free styrene-acrylic polymer dispersion designed for Liquid Applied Membrane (LAM).

In addition, can use in a wide range of paints and other surface finishes.

REVACRYL R 4345 is a specially modified, aqueous dispersion of a styrene-acrylic ester copolymer for waterproofing, primer and ready-to-use ceramic tile adhesive applications. The polymer is engineered for excellent wet adhesion.

REVACRYL R 4345 contains an anionic emulsifier system and is free from film forming aids, solvents and plasticizers.

REVACRYL R 4352 is a styrene-acrylic polymer dispersion based on APEO free surfactants.

Designed for a wide range of paint applications, REVACRYL R 4352 typically has lower odor than conventional styrene-acrylic, therefore very suitable for interior primer sealer or finish. Can be used for formulating premium or high PVC coatings.

REVACRYL R 4352 L is a styrene-acrylic polymer dispersion based on APEO free surfactants.

Designed for a wide range of paint applications, REVACRYL R 4352 L typically has lower odor than conventional styrene-acrylic, therefore very suitable for interior primer sealer or finish. Can be used for formulating premium or high PVC coatings.

REVACRYL R 4389 is a high solids, styrene acrylic polymer dispersion which displays a highly flexible yet water resistant film. 

REVACRYL R 4397 AF is a styrene acrylic polymer dispersion based on non-APEO surfactants and designed for two pack cement based formulations.

REVACRYL R 4397 AF would improve the waterproofing properties, adhesion, strength and durability of cement-based products.

REVACRYL R 472 M AF is a high solid, medium particles size styrene acrylic dispersion. APEO free. It possesses a highly flexible yet water resistant film.

REVACRYL R 8300 AF is a APEO free, high solids styrene acrylic polymer dispersion which displays a highly flexible yet water resistant film.

It also exhibits good compatibility with cement.

REVACRYL RM 4550 is a specially modified, aqueous dispersion of a styrene-acrylic ester copolymer. The dispersion is free from film forming aids, APEO, solvents and plasticizers.

REVACRYL RM 4550 shows excellent adhesion on mineral substrates and water-resistance. It is highly recommended for road marking paints.

REVACRYL RM 4550K shows excellent adhesion on mineral substrates and water-resistance. It is highly recommended for road marking paints.

REVACRYL RM 4550K is a specially modified, aqueous dispersion of a styrene-acrylic ester copolymer. The dispersion is free from film forming aids, APEO, solvents and plasticizers.

Ammonia free anionic stabilized aqueous dispersion of a styrene acrylic copolymer. The dispersion is free from film forming aids, APEO, solvents and plasticizers.

REVACRYL UG 2311 is low MFFT styrene acrylic dispersion with an improving of dirt pick up resistance. The dispersion is recommended for exterior and interior masonry coatings. 

REVACRYL UltraFine 4210 is a fine particle sized aqueous dispersion of a styrene acrylic copolymer.

It is suitable for both interior and exterior applications where its ability to penetrate makes it an excellent vehicle for the deep priming of substrates.

Reversol 1046 is a soya oil modified, long oil pentaerythritol esterified alkyd resin with high viscosity. It has good brushability and dries to form a durable film. Reversol 1046 has excellent initial gloss and gloss retention. 

Reversol 1046 HV is a soya oil modified, long oil pentaerythritol esterified alkyd resin with high viscosity. It has good brushability and dries to form a durable film. Reversol 1046 HV has excellent initial gloss and gloss retention. 

Reversol 5106 is a medium viscosity short oil non-drying alkyd with excellent light colour designed for wood coating. It has high initial gloss, good color retention, durability.

Reversol 5116 is a medium viscosity short oil non-drying alkyd with excellent light colour designed for wood coating. It has high initial gloss, good color retention, durability.

Reversol 7902 is an acrylic modified alkyd based on dehydrated castor oil. It has excellent hot slip and mar resistance, flow and leveling. Reversol 7902 has good fabricating properties and high alkali resistance.  In addition, it has good color retention and excellent durability. 

Reversol IC506BX is a medium viscosity short oil non-drying alkyd with excellent light colour designed for wood coating. It has high initial gloss, good color retention, durability.

Sodium metaperiodate can be used as a selective oxidising agent in the  pharmaceutical industry and in silk screen printing.

• Good resistance to oxidation and discoloration
• High viscous tackifier resin with excellent ageing characteristics
• Light color
• Low odor
• Wide solubility and compatibility range

• Easily emulsifiable
• Excellent resistance to oxidation
• Light color
• Low odor
• Medium softening point
• Thermoplastic hydrogenated resin
• Wide solubility and compatibility range

• Good resistance to oxidation and discoloration
• High viscous tackifier resin with excellent ageing characteristics
• Light color
• Low odor
• Wide solubility and compatibility range

• Excellent chewing gum base
• Excellent resistance to oxidation
• Light color
• Low odor
• Medium softening point
• Thermoplastic hydrogenated resin
• Wide solubility and compatibility range

• Excellent chewing gum base
• Excellent resistance to oxidation
• Light color
• Low odor
• Medium softening point
• Thermoplastic hydrogenated resin
• Wide solubility and compatibility range

• Low odor
  
• Low acidity
• Low color
• Medium softening point
• High oxidation resistance

• Color stability
• High acid number
• Light color
• Low odor
• Resistant to oxidation
• Wide solubility and compatibility range

Carboxylated PVAc Homopolymer

Terpolymer designed for elastomeric modification of PVC and plastic goods

Acrylate terpolymer partitioned with calcium carbonate

SyNovus™ Plus is a new nitrile technology offered by Synthomer. It is designed with proprietary cross-linking to optimize barrier protection performance of the final dipped gloves. With this proprietary technology, it is therefore able to cure at lower temperature than conventional latex and requires no sulfur and accelerator.

Synthebond 1090 is a styrene acrylic emulsion designed for use as laminating adhesive or in heat seal applications.

Water-based, pressure sensitive acrylic designed for removable applications

Synthebond 7656 is an acrylic emulsion polymer designed for formulating pressure sensitive adhesives for UL181B HVAC tapes. It demonstrates high cohesion and good instant peel.

Synthebond 7705 is an acrylic emulsion polymer designed for pressure sensitive adhesive clear label applications. 

Synthebond 7915 is a pressure sensitive adhesives for permanent graphics applications that need plasticizer migration resistance.

Synthebond AC 236 is a non-yellowing, APE-free, self cross linking acrylic based emulsion, designed for use as a firm hand finish on a variety of substrates

Synthebond AC 295 is a self cross linking acrylic based dispersion, designed for use as a firm hand finish on a variety of substrates

Synthebond AC 40 is a self cross linking acrylic latex used as a binder and textile hand builder with a stiff abrasion resistant finish.

Synthebond E 2055 is a high solids acrylic co-polymer for use as a vinyl & carpet flooring adhesive, pressure sensitive label adhesive and a general purpose packaging adhesive.

SYNTHEBOND E 2800 is an acrylic copolymer emulsion

designed as a high solids pressure sensitive adhesive.

This product provides high peel levels while maintaining

good tack and shear properties. It finds applications in

flooring mastics, permanent film adhesives and labels for

highly filled paper and/or freezer grades.

Synthebond E 4010 is a styrene acrylic copolymer of use in a variety of adhesive applications.

Synthebond E 5020 is a styrene acrylic designed with metal cross-linking mechanism for industrial and consumer floor polishes with high gloss and good durability. 

It is designed to be formulated at high solids with good levelling and chemical resistance properties.

Synthebond E 5025 is a styrene acrylic designed with metal cross-linking mechanism for industrial and consumer floor polishes with high gloss and good durability. 

It is designed to be formulated at high solids with good levelling and chemical resistance properties.

High solids acrylic copolymer for use in a variety of high-performance caulks, sealants, adhesives, and coating applications

Synthebond E 6230 is a high solids acrylic copolymer for use in a variety of high-performance caulks and sealants

Synthebond E 6931 is an aqueous emulsion copolymer of styrene and acrylic ester

Synthebond L 4805 is an aqueous acrylic polymer dispersion, which does not contain APEO. It s a pressure sensitive adhesive designed for use in various paper and filmic label applications.

SYNTHEBOND PRIME 7501 is a coater ready acrylic emulsion polymer formulated for applications where high shear and high temperature resistance is needed.

Synthebond Prime 7525 is a coater ready acrylic emulsion polymer for applications where good low surface energy bonding is needed.

Water-based acrylic polymer designed for removable pressure sensitive adhesives for masking and painter's tapes, labels, and protective films

Synthebond SA 134 is a soft styrene acrylic emulsion recommended as a general purpose textile back-coating and fabric finishing binder.  It has some internal cross-linking and thus provides good wash and dry clean durability.  The product exhibits very good water resistance. 

Synthebond SA 223 is an acrylic based emulsion designed for use as a firm hand finish on a variety of substrates. It provides a firm film while maintaining satisfactory flexibility and noncracking properties.  

Synthebond SA 223 is currently being used on pleated lamp shades and filtration media, paper bonding and general textile hand modifier.  

Synthebond XA 2207 is an aqueous acrylic polymer dispersion, which does not contain APEO. It s a coater ready pressure sensitive adhesive designed for use in various paper and filmic label applications.

SYNTHOMER 6348HS is an aqueous, colloidal dispersion of carboxylated butadiene-acrylonitrile copolymer with high acrylonitrile content. The dispersion contains an emulsifier system and is stabilized with an antioxidant. It offers high tensile strength and force-at-break for dipped gloves. 

Synthomer™ Ester Gum 15D-M kosher is recommended for use as an ingredient in chewing gum and complies with several regulations related to food contact materials, restrictions may apply. Contact Synthomer for further details on current Regulatory clearances.

• High softening point
• Low odor
• Low acidity

• Broad compatibility and solubility
• Low acid number
• Low odor and taste

• Broad compatibility and solubility
• Low acid number
• Low odor and taste
• Medium softening point
• Thermoplastic resin

• Broad compatibility and solubility
• Low acid number
• Low odor and taste
• Medium softening point
• Thermoplastic resin

• Low acid number
• Low odor

• Good color stability
• Good oxidation resistance
• Low color
• Low odor
• Low acidity
• Medium softening point

Synthomer™ Ester Gum 8WA-M kosher is recommended for use as clouding and weighting agent for citrus-flavored non-alcoholic beverage concentrates.

• Low acid number
• Low odor

• Broad compatibility and solubility
• Low acid number
• Low odor and taste
• Medium softening point
• Thermoplastic resin

• Balances attraction between polar fillers / reinforcements and non polar polymers
• Coupling agent for PP composites
• Maleic anhydride grafted polypropylene (PP)

• Balances attraction between polar fillers / reinforcements and non polar polymers
• Coupling agent for PP composites
• Maleic anhydride grafted polypropylene (PP)

SYNTHOSOL™ is a unique, specially formulated, cold water-soluble material based on polyvinyl alcohol intended for thermal extrusion applications.

SYNTHOSOL™ is a market-leading product with key benefits for 3D printing:

·       Efficient cold water solubility in tap water

·       Excellent thermal stability for high temperature printing

·       Extended printing temperature range facilitating compatibility with a broad range of materials

·       Inherently biodegradable (OECD 302B), microplastic free formulation

·       Non-toxic, non-hazardous product and waste

·       Developed and manufactured in the UK

• APE-free
• Enhances specific adhesion to polyolefin substrates and recycled corrugated board
• Good moisture resistance
• Good thermal and UV stability
• Promotes cohesion

• Excellent thermal and UV stability
• Good moisture resistance
• Light color
• Promotes high temperature performance
• Resistance to acids and alkalies

• APE-free
• Direct food contact FDA clearances
• Excellent thermal and UV stability
• Good moisture resistance
• Promotes high temperature performance

• APE-free
• Broad compatibility
• Excellent silicone liner wetting
• Excellent thermal and UV stability
• Good pigment and substrate wetting
• Good storage and mechanical stability
• Improves adhesion to polyethylene and polypropylene packaging substrates
• Light color
• Low surface tension
• Outstanding tackifier in waterborne adhesives
• Resistance to acids and alkalies

• APE-free
• Broad utility as a general purpose SBR tackifier
• Enhances specific adhesion to polyolefin substrates and recycled corrugated board
• Good moisture resistance
• Good thermal and UV stability
• Promotes cohesion

• APE-free
• Good moisture resistance
• Good thermal and UV stability
• Promotes cohesion
• Promotes high temperature performance

• Broad utility as a general purpose isoprene and natural rubber tackifier
• Exhibits good storage and mechanical stability
• Highly resistant to acids and alkalies
• Promotes low peel

• Good reinforcing agent that maintains excellent peel control
• Resistance to acids and alkalies

Tin dichloride is an essential co-catalyst in the resol-crosslinking reaction between diene groups in EPDM or other rubbers in thermoplasic vulcanisate manufacturing, or in the manufacture of mirrors.

Tin (II) oxide is a reducing agent that can be used as a catalyst in the manufacture of plasticizers and lubricants, toothpaste manufacturing, pigment market and as a raw material for tin compound production.

Velvetol 1471 is a multifunctional hydrophilic polyester polymer. While polyester fabrics offer a good substrate in terms of tensile strength and anti-crease properties, their hydrophobic nature, poor conductivity making static build up causes discomfort to human body when used as apparel material. Hydrophilic polyester technology has made it possible to finish polyester fabric that is cotton like, transports moisture and is easy to clean. Velvetol 1471 imparts that finish to polyester fabric in both exhaust and pad cure process without sacrificing key properties of the fabric.

Wingstay 29A liquid amine antioxidant is highly effective and can be used directly or after being emulsified for latex applications. Wingstay 29A provides synthetic rubber and mineral oils with excellent protection against oxygen attack, preventing product degradation especially at high temperatures.

Wingstay 29A Powder 70% actives amine antioxidant on inert silica facilitates product handling in rubber compounding applications. Wingstay 29A Powder protects rubber-based materials against oxygen attack and prevents product degradation, especially at high temperatures. 

Wingstay L Flakes antioxidant is highly effective and can be used directly, or after being pre-dispersed or emulsified for latex applications. Wingstay L Flakes offers excellent protection against oxygen attack and prevents product degradation and discoloration during processing and storage.

Wingstay L Powder antioxidant is highly effective and can be used directly, or after being pre-dispersed or emulsified for latex applications.

Wingstay L Powder offers excellent protection against oxygen attack and prevents product degradation and discoloration during processing and storage.

Wingstay SP liquid antioxidant is cost-effective and can be used directly or after being emulsified for latex applications. Wingstay SP provides synthetic rubber, as well as rubber-based materials like foams and adhesives, with protection against oxygen attack during manufacturing.

Wingstay SP Powder 70% actives phenolic antioxidant on inert silica facilitates product handling in rubber compounding applications. Wingstay SP Powder protects rubber materials against oxygen attack, and prevents product degradation and discoloration during processing and storage.

Zinc hydroxystannate (Flamtard H) is a flame-retardant synergist that can be used in halogen containing plastics such as PVC to reduce flammability via char promotion and smoke suppression.

Zinc stannate can be used as a flame retardant synergist in polymer applications, in the manufacture of films for solar cells, touch screens and in energy efficient glass.