The best-in-class binders for anti-corrosion metal coatings

Key features:
  • Create APEO-free and formaldehyde-free formulations
  • Free of plasticisers and coalescents
  • Advanced surfactants ensure excellent wetting and adhesion on metal substrates
  • Outstanding hydrophobicity
  • Superior salt spray resistance
  • High-gloss enamel.

Well-protected metals have an extended lifespan which saves money and reduces environmental impact. Synthomer technologies help you to create anti-corrosion products that provide long-lasting metal protection, maintaining aesthetic appeal and structural integrity.

Our extensive range of water-based and solvent-borne resins provides specific protective attributes, including resistance to alkali (salt), corrosion, fire (intumescence), efflorescence and chemicals, as well as thermal insulation.

Synthomer binders enable you to boost the environmental credentials of your products with options including low-VOC, and non-hazardous substances such as APEO and formaldehyde-free solutions. And our binders will help you to achieve anti-corrosion performance according to EN 12944-2 C 3-C 4, medium protection level (five to 15 years).

Our technologies can be applied at ambient or slightly forced temperatures; as direct-to-metal all-in-one coating, or as a primer application.  They are ideal for use on steel frame constructions such as power pylons, marine engineering, and ACE applications (agriculture, construction, and earth-moving equipment).

TradenameChemistryDescription
Abalyn™ D-E Methyl Ester of RosinRosin Resin

Abalyn™ D-E methyl ester of gum rosin, is an amber-colored, near-neutral, tacky, viscous liquid. It is resinous in nature with clarity and high refractive index, low vapor pressure, high boiling point, and good thermal stability. It has excellent surface-wetting properties. These physical properties, plus its wide compatibility, make it useful in a variety of applications, including lacquers, inks, paper coatings, varnishes, adhesives, sealing compounds, plastics and wood preservatives. To assure minimum odor of products in which it is used, it is given a special steam sparging treatment.

  • Alcohol-soluble
  • Excellent perfume fixative
  • Excellent surface wetting and adhesion properties
  • Excellent wood preservative
  • Insoluble in water
  • Liquid tackifier and plasticizer resin for a wide variety of raw materials and polymers

Abitol™ E Hydroabietyl AlcoholRosin Resin

Abitol™ E resin hydroabietyl alcohol is a colorless, tacky, balsamic resin. Its tackiness and extremely pale color, combined with its solubility in common organic solvents and compatibility with resins, film-formers, and oils, have led to its use as a resinous plasticizer and/or tackifier in plastics, lacquers, inks and adhesives. Chemically, Abitol E resin is a high molecular weight, primary, monohydric alcohol derived from rosin acids that have been hydrogenated to reduce unsaturation. Abitol E resin undergoes the general types of chemical reaction common to most primary alcohols.

  • Alcohol-soluble
  • High refractive index
  • High viscous tackifier resin with excellent ageing characteristics
  • Light color
  • Low odor
  • Reactive functionality
  • Wide solubility and compatibility range

Dresinate 91-44WL Rosin SoapRosin ResinDresinate™ 91-44WL rosin soap is a fluid, high solids, aqueous solution of potassium soap of tall oil rosin. It is designed primarily for applications that require soap solutions of as low a water content as practical and of viscosity low enough that it is possible to pump the soap at practical temperatures. It is used as an emulsifier ingredient in solvent cleaners and soluble oils for metal cleaning. Dresinate™ 91-44WL  provides highly stable emulsions over a wide range of water hardness when used in combination with petroleum sulfonates in soluble oil formulations.
  • Dilutible with water and aqueous solutions of alcohols and glycols
  • Provides highly stable emulsions
Dresinate™ 91 Rosin SoapRosin ResinDresinate™ 91 rosin soap is a fluid, high solids, aqueous solution of potassium soap of tall oil rosin. It is designed primarily for applications that require soap solutions of as low a water content as practical and of viscosity low enough that it is possible to pump the soap at practical temperatures. It is used as an emulsifier ingredient in solvent cleaners and soluble oils for metal cleaning. Dresinate™ 91 provides highly stable emulsions over a wide range of water hardness when used in combination with petroleum sulfonates in soluble oil formulations.
  • Dilutible with water and aqueous solutions of alcohols and glycols
  • Provides highly stable emulsions
Dresinate™ TX Rosin SoapRosin ResinDresinate™ TX tall oil soap is a free flowing solid, fully saponified sodium soap of tall oil. It is designed mainly as an emulsifier promoting detergent or cleaning activity, particularly in highly built industrial metal cleaners.
  • Fully saponified sodium salt of tall oil
  • Readily dissolves in water
  • Dry, free flowing powder
Dymerex™ Polymerized RosinRosin Resin

Dymerex™ modified gum rosin is a pale, acidic, thermoplastic, high softening point resin. It is composed predominately of dimeric acids derived from rosin with lesser amounts of monomeric resin acids and neutral materials of rosin origin. Dymerex™ modified resin has high resistance to oxidation and does not crystallize from solutions or from solid compositions. It is compatible with many natural and synthetic film formers and rubbers. Being an acidic resin, it reacts readily with polyalcohols or hydrated lime to yield high melting derivatives.

  • Alcohol-soluble
  • Non-crystalline
  • Resistant to oxidation
  • Thermoplastic rosin acid
  • Very high softening point

Eastoflex™ E1003 Amorphous PolyolefinAmorphous Polyolefin

Eastoflex™ Amorphous Polyolefins (APOs) are characteristically saturated, low molecular weight, propylene-based olefin polymers. These products are inherently soft, tacky, and flexible, having a broad compatibility with numerous elastomers, polymers, and tackifying resins. Eastoflex™ APOs are characterized by consistent quality, low odor, good heat stability, and low color. Eastoflex™ E1003 is a copolymer of propylene and ethylene having a melt viscosity of 300 mPa·s at 190°C.

  • Broad compatibility with numerous elastomers, polymers, and tackifying resins
  • Broad temperature service range
  • Excellent thermal and UV stability
  • Excellent water and moisture resistance
  • Low color
  • Low odor

Eastoflex™ E1016 Amorphous PolyolefinAmorphous PolyolefinEastoflex™ Amorphous Polyolefins (APOs) are characteristically saturated, low molecular weight, propylene-based olefin polymers. These products are inherently soft, tacky, and flexible with a broad compatibility with numerous elastomers, polymers, and tackifying resins. Eastoflex™ APOs are characterized by consistent quality, low odor, good heat stability, and low color. Eastoflex™ E1016 is a copolymer of propylene and ethylene, having a melt viscosity of 1600 mPa·s at 190°C.
  • Broad compatibility with numerous elastomers, polymers, and other tackifying resins
  • Broad temperature service range
  • Excellent thermal and UV stability
  • Excellent water and moisture resistance
  • Low color
  • Low odor
Eastoflex™ E1016PL Amorphous PolyolefinAmorphous PolyolefinEastoflex™ Amorphous Polyolefins (APOs) are characteristically saturated, low molecular weight, propylene-based olefin polymers. These products are inherently soft, tacky, and flexible, having a broad compatibility with numerous elastomers, polymers, and tackifying resins. Eastoflex™ APOs are characterized by consistent quality, low odor, excellent heat stability, and low color. Eastoflex™ E1016PL is a copolymer of propylene and ethylene, pelletized and coated with a polypropylene powder. It has a melt viscosity of 1,600 mPa•s at 190°C.
  • Broad compatibility with numerous elastomers, polymers, and tackifying resins
  • Broad temperature service range
  • Excellent thermal and UV stability
  • Excellent water and moisture resistance
  • Low color
  • Low odor
Eastoflex™ E1016PL-1 Amorphous PolyolefinAmorphous PolyolefinEastoflex™ Amorphous Polyolefins (APOs) are characteristically saturated, low molecular weight, propylene-based olefin polymers. These products are inherently soft, tacky, and flexible, having a broad compatibility with numerous elastomers, polymers, and tackifying resins. Eastoflex™ APOs are characterized by consistent quality, low odor, excellent heat stability, and low color. Eastoflex™ E1016PL-1 is a copolymer of propylene and ethylene, pelletized and coated with a low-density polyethylene powder. It has a melt viscosity of 1,600 mPa•s at 190°C.
  • Broad compatibility with numerous elastomers, polymers, and tackifying resins
  • Broad temperature service range
  • Excellent thermal and UV stability
  • Excellent water and moisture resistance
  • Low color
  • Low odor
Eastoflex™ E1045 Amorphous PolyolefinAmorphous PolyolefinEastoflex™ Amorphous Polyolefins (APOs) are characteristically saturated, low molecular weight, propylene-based olefin polymers. These products are inherently soft, tacky, and flexible with a broad compatibility with numerous elastomers, polymers, and tackifying resins. Eastoflex™ APOs are characterized by consistent quality, low odor, good heat stability, and low color. Eastoflex™ E1045 is a copolymer of propylene and ethylene, having a melt viscosity of 4,500 mPa·s at 190°C.
  • Broad compatibility with numerous elastomers, polymers, and tackifying resins
  • Broad temperature service range
  • Excellent thermal and UV stability
  • Excellent water and moisture resistance
  • Low color
  • Low odor
Eastoflex™ E1045PL Amorphous PolyolefinAmorphous PolyolefinEastoflex™ Amorphous Polyolefins (APOs) are characteristically saturated, low molecular weight, propylene-based olefin polymers. These products are inherently soft, tacky, and flexible, having a broad compatibility with numerous elastomers, polymers, and tackifying resins. Eastoflex™ APOs are characterized by consistent quality, low odor, excellent heat stability, and low color. Eastoflex™ E1045PL is a copolymer of propylene and ethylene, pelletized and coated with a polypropylene powder. It has a melt viscosity of 4,500 mPa•s at 190°C.
  • Broad compatibility with numerous elastomers, polymers, and tackifying resins
  • Broad temperature service range
  • Excellent thermal and UV stability
  • Excellent water and moisture resistance
  • Low color
  • Low odor
Eastoflex™ E1060 Amorphous PolyolefinAmorphous PolyolefinEastoflex™ Amorphous Polyolefins (APOs) are characteristically saturated, low molecular weight, propylene-based olefin polymers. These products are inherently soft, tacky, and flexible, having a broad compatibility with numerous elastomers, polymers, and tackifying resins. Eastoflex™ APOs are characterized by consistent quality, low odor, good heat stability, and low color. Eastoflex™ E1060 is a copolymer of propylene and ethylene, having a melt viscosity of 6,000 mPa·s at 190°C.
  • Broad compatibility with numerous elastomers, polymers, and tackifying resins
  • Broad temperature service range
  • Excellent thermal and UV stability
  • Excellent water and moisture resistance
  • Low color
  • Low odor
Eastoflex™ E1060PL Amorphous PolyolefinAmorphous PolyolefinEastoflex™ Amorphous Polyolefins (APOs) are characteristically saturated, low molecular weight, propylene-based olefin polymers. These products are inherently soft, tacky, and flexible, having a broad compatibility with numerous elastomers, polymers, and tackifying resins. Eastoflex™ APOs are characterized by consistent quality, low odor, good heat stability, and low color. Eastoflex™ E1060PL is a copolymer of propylene and ethylene, pelletized and coated with a polypropylene powder, having a melt viscosity of 5,700 mPa·s at 190°C.
  • Broad compatibility with numerous elastomers, polymers, and tackifying resins
  • Broad temperature service range
  • Convenient product form
  • Excellent thermal and UV stability
  • Excellent water and moisture resistance
  • Low color
  • Low odor
Eastoflex™ E1060PL-1 Amorphous PolyolefinAmorphous PolyolefinEastoflex™ Amorphous Polyolefins (APOs) are characteristically saturated, low molecular weight, propylene-based olefin polymers. These products are inherently soft, tacky, and flexible, having a broad compatibility with numerous elastomers, polymers, and tackifying resins. Eastoflex™ APOs are characterized by consistent quality, low odor, good heat stability, and low color. Eastoflex™ E1060PL-1 is a copolymer of propylene and ethylene, pelletized and coated with a low-density polyethylene powder, having a melt viscosity of 6,000 mPa·s at 190°C.
  • Broad compatibility with numerous elastomers, polymers, and tackifying resins
  • Broad temperature service range
  • Convenient product form
  • Excellent thermal and UV stability
  • Excellent water and moisture resistance
  • Low color
  • Low odor
Eastoflex™ E1200PL Amorphous PolyolefinAmorphous PolyolefinEastoflex™ Amorphous Polyolefins (APOs) are characteristically saturated, low molecular weight, propylene-based olefin polymers. These products are inherently soft, tacky, and flexible, having a broad compatibility with numerous elastomers, polymers, and tackifying resins. Eastoflex™ APOs are characterized by consistent quality, low odor, good heat stability, and low color. Eastoflex™ E1200PL is a copolymer of propylene and ethylene, pelletized and coated with polypropylene to minimize pellet blocking.
  • Broad compatibility with numerous elastomers, polymers, and tackifying resins
  • Broad temperature service range
  • Convenient product form
  • Excellent thermal and UV stability
  • Excellent water and moisture resistance
  • Low color
  • Low odor
Eastoflex™ E2030 Amorphous PolyolefinAmorphous PolyolefinEastoflex™ Amorphous Polyolefins (APOs) are characteristically saturated, low molecular weight, propylene-based olefin polymers. These products are inherently soft, tacky, and flexible with a broad compatibility with numerous elastomers, polymers, and tackifying resins. Eastoflex™ APOs are characterized by consistent quality, low odor, good heat stability, and low color. Eastoflex™ E2030 is a copolymer of propylene and ethylene, having a melt viscosity of 3,000 mPa·s at 190°C.
  • Broad compatibility with numerous elastomers, polymers, and tackifying resins
  • Broad temperature service range
  • Excellent thermal and UV stability
  • Excellent water and moisture resistance
  • Low color
  • Low odor
Eastoflex™ M1014 Amorphous PolyolefinAmorphous PolyolefinEastoflex™ Amorphous Polyolefins (APOs) are characteristically saturated, low molecular weight, propylene-based olefin polymers. These products are inherently soft, tacky, and flexible, having a broad compatibility with numerous elastomers, polymers, and tackifying resins. Eastoflex™ APOs are characterized by consistent quality, low odor, good heat stability, and low color. Eastoflex™ M1014 is a blend of propylene homopolymer and copolymers of propylene and ethylene. The resulting blend has a melt viscosity of 1,350 mPa·s at 190°C.
  • Broad compatibility with numerous elastomers, polymers, and tackifying resins
  • Broad temperature service range
  • Excellent thermal and UV stability
  • Excellent water and moisture resistance
  • Low color
  • Low odor
Eastoflex™ M1018 Amorphous PolyolefinAmorphous PolyolefinEastoflex™ Amorphous Polyolefins (APOs) are characteristically saturated, low molecular weight, propylene-based olefin polymers. These products are inherently soft, tacky, and flexible, having a broad compatibility with numerous elastomers, polymers, and tackifying resins. Eastoflex™ APOs are characterized by consistent quality, low odor, good heat stability, and low color. Eastoflex™ M1018 is a blend of propylene homopolymer and copolymers of propylene and ethylene. The resulting blend has a melt viscosity of 1,800 mPa·s at 190°C.
  • Broad compatibility with numerous elastomers, polymers, and tackifying resins
  • Broad temperature service range
  • Excellent thermal and UV stability
  • Excellent water and moisture resistance
  • Low color
  • Low odor
Eastoflex™ M1018PL-1 Amorphous PolyolefinAmorphous PolyolefinEastoflex™ Amorphous Polyolefins (APOs) are characteristically saturated, low molecular weight, propylene-based olefin polymers. These products are inherently soft, tacky, and flexible, having a broad compatibility with numerous elastomers, polymers, and tackifying resins. Eastoflex™ APOs are characterized by consistent quality, low odor, good heat stability, and low color. Eastoflex™ M1018PL-1 is a blend of propylene homopolymer and copolymers of propylene and ethylene, pelletized and coated with a polyethylene powder. The resulting blend has a melt viscosity of 1,800 mPa·s at 190°C.
  • Broad compatibility with numerous elastomers, polymers, and tackifying resins
  • Broad temperature service range
  • Convenient product form
  • Excellent thermal and UV stability
  • Excellent water and moisture resistance
  • Low color
  • Low odor
Eastoflex™ M1020 Amorphous PolyolefinAmorphous PolyolefinEastoflex™ Amorphous Polyolefins (APOs) are characteristically saturated, low molecular weight, propylene-based olefin polymers. These products are inherently soft, tacky, and flexible, having a broad compatibility with numerous elastomers, polymers, and tackifying resins. Eastoflex™ APOs are characterized by consistent quality, low odor, good heat stability, and low color. Eastoflex™ M1020 is a blend of propylene homopolymer and copolymers of propylene and ethylene. The resulting blend has a melt viscosity of 2,000 mPa·s at 190°C.
  • Broad compatibility with numerous elastomers, polymers, and tackifying resins
  • Broad temperature service range
  • Excellent thermal and UV stability
  • Excellent water and moisture resistance
  • Low color
  • Low odor
Eastoflex™ M1020PL Amorphous PolyolefinAmorphous PolyolefinEastoflex™ Amorphous Polyolefins (APOs) are characteristically saturated, low molecular weight, propylene-based olefin polymers. These products are inherently soft, tacky, and flexible, having a broad compatibility with numerous elastomers, polymers, and tackifying resins. Eastoflex™ APOs are characterized by consistent quality, low odor, good heat stability, and low color. Eastoflex™ M1020PL is a blend of propylene homopolymer and copolymers of propylene and ethylene, pelletized and coated with a polypropylene powder. The resulting blend has a melt viscosity of 2,000 mPa·s at 190°C.
  • Broad compatibility with numerous elastomers, polymers, and tackifying resins
  • Broad temperature service range
  • Convenient product form
  • Excellent thermal and UV stability
  • Excellent water and moisture resistance
  • Low color
  • Low odor
Eastoflex™ M1020PL-1 Amorphous PolyolefinAmorphous PolyolefinEastoflex™ Amorphous Polyolefins (APOs) are characteristically saturated, low molecular weight, propylene-based olefin polymers. These products are inherently soft, tacky, and flexible, having a broad compatibility with numerous elastomers, polymers, and tackifying resins. Eastoflex™ APOs are characterized by consistent quality, low odor, good heat stability, and low color. Eastoflex™ M1020PL-1 is a blend of propylene homopolymer and copolymers of propylene and ethylene, pelletized and coated with a low-density polyethylene powder. The resulting blend has a melt viscosity of 2,000 mPa·s at 190°C.
  • Broad compatibility with numerous elastomers, polymers, and tackifying resins
  • Broad temperature service range
  • Convenient product form
  • Excellent thermal and UV stability
  • Excellent water and moisture resistance
  • Low color
  • Low odor
Eastoflex™ M1025 Amorphous PolyolefinAmorphous PolyolefinEastoflex™ Amorphous Polyolefins (APOs) are characteristically saturated, low molecular weight, propylene-based olefin polymers. These products are inherently soft, tacky, and flexible, having a broad compatibility with numerous elastomers, polymers, and tackifying resins. Eastoflex™ APOs are characterized by consistent quality, low odor, good heat stability, and low color. Eastoflex™ M1025 is a blend of propylene homopolymer and copolymers of propylene and ethylene. The resulting blend has a melt viscosity of 2,500 mPa·s at 190°C.
  • Broad compatibility with numerous elastomers, polymers, and tackifying resins
  • Broad temperature service range
  • Excellent thermal and UV stability
  • Excellent water and moisture resistance
  • Low color
  • Low odor
Eastoflex™ M1030 Amorphous PolyolefinAmorphous PolyolefinEastoflex™ Amorphous Polyolefins (APOs) are characteristically saturated, low molecular weight, propylene-based olefin polymers. These products are inherently soft, tacky, and flexible, having a broad compatibility with numerous elastomers, polymers, and tackifying resins. Eastoflex™ APOs are characterized by consistent quality, low odor, good heat stability, and low color. Eastoflex™ M1030 is a blend of propylene homopolymer and copolymers of propylene and ethylene. The resulting blend has a melt viscosity of 3,000 mPa·s at 190°C.
  • Broad compatibility with numerous elastomers, polymers, and other tackifying resins
  • Broad temperature service range
  • Excellent thermal and UV stability
  • Excellent water and moisture resistance
  • Low color
  • Low odor
Eastoflex™ M1030PL Amorphous PolyolefinAmorphous PolyolefinEastoflex™ Amorphous Polyolefins (APOs) are characteristically saturated, low molecular weight, propylene-based olefin polymers. These products are inherently soft, tacky, and flexible, having a broad compatibility with numerous elastomers, polymers, and tackifying resins. Eastoflex™ APOs are characterized by consistent quality, low odor, good heat stability, and low color. Eastoflex™ M1030PL is a blend of propylene homopolymer and copolymers of propylene and ethylene, pelletized and coated with a polypropylene powder. The resulting blend has a melt viscosity of 3,000 mPa·s at 190°C.
  • Broad compatibility with numerous elastomers, polymers, and tackifying resins
  • Broad temperature service range
  • Convenient product form
  • Excellent thermal and UV stability
  • Excellent water and moisture resistance
  • Low color
  • Low odor
Eastoflex™ M1030PL-1 Amorphous PolyolefinAmorphous PolyolefinEastoflex™ Amorphous Polyolefins (APOs) are characteristically saturated, low molecular weight, propylene-based olefin polymers. These products are inherently soft, tacky, and flexible, having a broad compatibility with numerous elastomers, polymers, and tackifying resins. Eastoflex™ APOs are characterized by consistent quality, low odor, good heat stability, and low color. Eastoflex™ M1030PL-1 is a blend of propylene homopolymer and copolymers of propylene and ethylene, pelletized and coated with a low-density polyethylene powder. The resulting blend has a melt viscosity of 3,000 mPa·s at 190°C.
  • Broad compatibility with numerous elastomers, polymers, and tackifying resins
  • Broad temperature service range
  • Convenient product form
  • Excellent thermal and UV stability
  • Excellent water and moisture resistance
  • Low color
  • Low odor
Eastoflex™ M1058 Amorphous PolyolefinAmorphous PolyolefinEastoflex™ Amorphous Polyolefins (APOs) are characteristically saturated, low molecular weight, propylene-based olefin polymers. These products are inherently soft, tacky, and flexible, having a broad compatibility with numerous elastomers, polymers, and tackifying resins. Eastoflex™ APOs are characterized by consistent quality, low odor, good heat stability, and low color. Eastoflex™ M1058 is a blend of propylene homopolymer and copolymers of propylene and ethylene. The resulting blend has a meltl viscosity of 5,800 mPa·s at 190° C.
  • Broad compatibility with numerous elastomers, polymers, and other tackifying resins
  • Broad temperature service range
  • Excellent thermal and UV stability
  • Excellent water and moisture resistance
  • Low color
Eastoflex™ M1058PL Amorphous PolyolefinAmorphous PolyolefinEastoflex™ Amorphous Polyolefins (APOs) are characteristically saturated, low molecular weight, propylene-based olefin polymers. These products are inherently soft, tacky, and flexible, having a broad compatibility with numerous elastomers, polymers, and tackifying resins. Eastoflex™ APOs are characterized by consistent quality, low odor, good heat stability, and low color. Eastoflex™ M1058PL is a blend of propylene homopolymer and copolymers of propylene and ethylene, pelletized and coated with a polypropylene powder. The resulting blend has a melt viscosity of 5,800 mPa·s at 190°C.
  • Broad compatibility with numerous elastomers, polymers, and tackifying resins
  • Broad temperature service range
  • Convenient product form
  • Excellent thermal and UV stability
  • Excellent water and moisture resistance
  • Low color
  • Low odor
Eastoflex™ P1010 Amorphous PolyolefinAmorphous PolyolefinEastoflex™ Amorphous Polyolefins (APOs) are characteristically saturated, low molecular weight, propylene-based olefin polymers. These products are inherently soft, tacky, and flexible, having a broad compatibility with numerous elastomers, polymers, and tackifying resins. Eastoflex™ APOs are characterized by consistent quality, low odor, good heat stability, and low color. Eastoflex™ P1010 is a propylene homopolymer having a melt viscosity of 1,000 mPa·s at 190°C.
  • Broad compatibility with numerous elastomers, polymers, and tackifying resins
  • Broad temperature service range
  • Convenient product form
  • Excellent thermal and UV stability
  • Excellent water and moisture resistance
  • Low color
  • Low odor
Eastoflex™ P1010PL Amorphous PolyolefinAmorphous PolyolefinEastoflex™ Amorphous Polyolefins (APOs) are characteristically saturated, low molecular weight, propylene-based olefin polymers. These products are inherently soft, tacky, and flexible, having a broad compatibility with numerous elastomers, polymers, and tackifying resins. Eastoflex™ APOs are characterized by consistent quality, low odor, good heat stability, and low color. Eastoflex™ P1010PL is a propylene homopolymer, pelletized and coated with a polypropylene powder, having a melt viscosity of 1,000 mPa·s at 190°C.
  • Broad compatibility with numerous elastomers, polymers, and tackifying resins
  • Broad temperature service range
  • Convenient product form
  • Excellent thermal and UV stability
  • Excellent water and moisture resistance
  • Low color
  • Low odor
Eastoflex™ P1023 Amorphous PolyolefinAmorphous PolyolefinEastoflex™ Amorphous Polyolefins (APOs) are characteristically saturated, low molecular weight, propylene-based olefin polymers. These products are inherently soft, tacky, and flexible, having a broad compatibility with numerous elastomers, polymers, and tackifying resins. Eastoflex™ APOs are characterized by consistent quality, low odor, good heat stability, and low color. Eastoflex™ P1023 is a propylene homopolymer having a melt viscosity of 2,300 mPa·s at 190°C.
  • Broad compatibility with numerous elastomers, polymers, and tackifying resins
  • Broad temperature service range
  • Convenient product form
  • Excellent thermal and UV stability
  • Excellent water and moisture resistance
  • Low color
  • Low odor
Eastotac™ C-100L ResinNBR-Dry

Eastotac™ C-100L Resin is a tackifier resin with a softening point of 100°C and a molten Gardner color of 2.

Broad compatibility with numerous elastomers, polymers, and tackifying resins

  • Consistent quality
  • Excellent heat stability
  • Light color
  • Low odor

Eastotac™ C-115L ResinSB-DryEastotac™ C-115L Resin is a tackifier resin with a softening point of 115°C and a molten Gardner color of 2.
  • Broad compatibility with numerous elastomers, polymers, and other tackifying resins
  • Consistent quality
  • Excellent heat stability
  • Light color
  • Low odor
Eastotac™ C-115R ResinSB-DryEastotac™ C-115R Resin is a tackifier resin with a softening point of 115°C and a molten Gardner color of 4.
  • Broad compatibility with numerous elastomers, polymers, and other tackifying resins
  • Consistent quality
  • Excellent heat stability
  • Low odor
Eastotac™ C-115W ResinSB-DryEastotac™ C-115W Resin is a tackifier resin with a softening point of 115°C and a molten Gardner color of <1. In applications where low color is required, the W-grade resins are suggested.
  • Broad compatibility with numerous elastomers, polymers, and tackifying resins
  • Consistent quality
  • Excellent heat stability
  • Light to water-clear color
  • Low odor
Eastotac™ H-100E ResinSB-DryEastotac™ H-100E is a hydrogenated hydrocarbon resin, having a softening point of 100°C and a Gardner color of 5 measured at 50% solids.
  • Broad compatibility with numerous elastomers, polymers, and other tackifying resins
  • Consistent quality
  • Excellent heat stability
  • Low odor
Eastotac™ H-100L ResinSB-DryEastotac™ H-100L is a hydrogenated hydrocarbon resin, having a softening point of 100°C and a molten Gardner color of 2. Eastotac H-100L has excellent compatibility with APAO (amorphous poly-alpha-olefins), metallocene-catalyzed polyolefins, as well as the midblock of SIS (styrene-isoprene-styrene), and SEBS (styrene-ethylene/butylene-styrene) block copolymers. Eastotac H-100L resin is used in numerous hygiene, packaging & assembly adhesive applications and sealant applications.
  • Broad compatibility with numerous elastomers, polymers, and other tackifying resins
  • Consistent quality
  • Excellent heat stability
  • Light color
  • Low odor
Eastotac™ H-100W ResinSB-DryEastotac™ H-100W is a hydrogenated hydrocarbon resin, having a softening point of 100°C and a molten Gardner color of <1. In applications where low color is required, the W-grade resins are suggested. Eastotac H-100W has excellent compatibility with APAO (amorphous poly-alpha-olefins), metallocene-catalyzed polyolefins, as well as the midblock of SIS (styrene-isoprene-styrene), and SEBS (styrene-ethylene/butylene-styrene) block copolymers. Eastotac H-100W resin is used in numerous hygiene, packaging and assembly adhesive applications, sealant applications, and in epilatorie waxes.
  • Broad compatibility with numerous elastomers, polymers, and other tackifying resins
  • Consistent quality
  • Excellent adhesion in SEBS and butyl sealants
  • Excellent heat stability
  • Low odor
  • Water-white color
Eastotac™ H-115E ResinSB-DryEastotac™ H-115E is a hydrogenated hydrocarbon resin, having a softening point of 115°C and a Gardner color of 5 measured at 50% solids.
  • Broad compatibility with numerous elastomers, polymers, and other tackifying resins
  • Consistent quality
  • Excellent heat stability
  • Low odor
Eastotac™ H-115L ResinSB-DryEastotac™ H-115L is a hydrogenated hydrocarbon resin, having a softening point of 115°C and a molten Gardner color of 2. Eastotac H-115L has excellent compatibility with APAO (amorphous poly-alpha-olefins), metallocene-catalyzed polyolefins, as well as the midblock of SIS (styrene-isoprene-styrene), and SEBS (styrene-ethylene/butylene-styrene) block copolymers. Eastotac H-115L resin is used in numerous adhesive and sealant applications.
  • Broad compatibility with numerous elastomers, polymers, and other tackifying resins
  • Consistent quality
  • Excellent heat stability
  • Light color
  • Low odor
Eastotac™ H-115R ResinSB-DryEastotac™ H-115R is a hydrogenated hydrocarbon resin, having a softening point of 115°C and a molten Gardner color of 5. Eastotac H-115R has excellent compatibility with APAO (amorphous poly-alpha-olefins), metallocene-catalyzed polyolefins, as well as the midblock of SIS (styrene-isoprene-styrene), and SEBS (styrene-ethylene/butylene-styrene) block copolymers. Eastotac H-115R resin is used in numerous adhesive and sealant applications.
  • Broad compatibility with numerous elastomers, polymers, and other tackifying resins
  • Consistent quality
  • Excellent heat stability
  • Low odor
Eastotac™ H-130E ResinSB-DryEastotac™ H-130E is a hydrogenated hydrocarbon resin, having a softening point of 130°C and a molten Gardner color of 8.
  • Broad compatibility with numerous elastomers, polymers, and other tackifying resins
  • Consistent quality
  • Excellent heat stability
  • Low odor
Eastotac™ H-130R ResinSB-DryEastotac™ H-130R is a hydrogenated hydrocarbon resin, having a softening point of 130°C and a molten Gardner color of 5. Eastotac H-130R has excellent compatibility with APAO (amorphous poly-alpha-olefins), metallocene-catalyzed polyolefins, as well as the midblock of SIS (styrene-isoprene-styrene), and SEBS (styrene-ethylene/butylene-styrene) block copolymers, and is frequently used in hygiene adhesives, packaging and assembly adhesives, and sealants.
  • Broad compatibility with numerous elastomers, polymers, and other tackifying resins
  • Consistent quality
  • Excellent heat stability
  • Low odor
Eastotac™ H-130W ResinSB-DryEastotac™ H-130W is a hydrogenated hydrocarbon resin, having a softening point of 130°C and a molten Gardner color of <1. In applications where low color is required, the W-grade resins are suggested. Eastotac H-130W has excellent compatibility with APAO (amorphous poly-alpha-olefins), metallocene-catalyzed polyolefins, as well as the midblock of SIS (styrene-isoprene-styrene), and SEBS (styrene-ethylene/butylene-styrene) block copolymers, and is frequently used in hygiene adhesives, packaging and assembly adhesives, and sealants.
  • Broad compatibility with numerous elastomers, polymers, and other tackifying resins
  • Consistent quality
  • Excellent heat stability
  • Low odor
  • Water-white color
Eastotac™ H-142R ResinSB-DryEastotac™ H-142R is a hydrogenated hydrocarbon resin, having a softening point of 142°C and a molten Gardner color of 5. Eastotac H-142R has excellent compatibility with SEBS (styrene-ethylene/butylene-styrene) block copolymers and butyl rubbers, as well as polyolefins, and is frequently used in adhesives and sealants.
  • Broad compatibility with numerous elastomers, polymers, and other tackifying resins
  • Consistent quality
  • Excellent compatibility with SEBS and butyl rubbers
  • Excellent heat stability
  • Low odor
Eastotac™ H-142W ResinSB-DryEastotac™ H-142W is a hydrogenated hydrocarbon resin, having a softening point of 142°C and a molten Gardner color of <1. Eastotac™ H-142W has excellent compatibility with SEBS (styrene-ethylene/butylene-styrene) block copolymers and butyl rubbers, as well as polyolefins, and is frequently used in adhesives, sealants, and in polymer and film modification.
  • Broad compatibility with numerous elastomers, polymers, and other tackifying resins
  • Consistent quality
  • Excellent compatibility with SEBS and butyl rubbers
  • Excellent heat stability
  • Low odor and volatility
  • Water-white color
Endex™ 155 Hydrocarbon ResinPure Monomer ResinA water-white thermoplastic resin made from purified aromatic hydrocarbon monomers. Used to modify the melt flow and increase the temperature resistance of styrenic plastic and rubber. Reinforces the styrene endblocks of styrenic block copolymers. In adhesives Endex™ 155 hydrocarbon resin will associate with the styrenic endblocks, producing higher cohesion at temperatures up to 70°C without affecting tack and adhesion properties.
  • Heat stability
  • Pure aromatic monomer composition
  • Very high softening point
  • Water-white initial color
Endex™ 160 Hydrocarbon ResinPure Monomer ResinA water-white thermoplastic resin made from purified aromatic hydrocarbon monomers. Used to modify the melt flow and increase the temperature resistance of styrenic plastic and rubber. Reinforces the styrene endblocks of styrenic block copolymers. In adhesives Endex™ 160 hydrocarbon resin will associate with the styrenic endblocks, producing higher cohesion at temperatures up to 70°C without affecting tack and adhesion properties. Endex™ 160 hydrocarbon resin has the highest softening point among all hydrocarbon resins available from Synthomer.
  • Heat stability
  • Highest softening point available
  • Pure aromatic monomer composition
  • Water-white initial color
Foral™ 105-E Ester of Hydrogenated RosinRosin Resin

Foral™ 105-E ester of hydrogenated rosin is a pale, thermoplastic ester resin derived from pentaerythritol and a highly stabilized rosin. Like Foral 85-E ester of hydrogenated rosin, which is produced from the same unique oxidation-resistant rosin, Foral 105-E offers advantages as the tackifier or modifier resin in various adhesives and coating compositions. In these applications, both resins exhibit resistance to oxidation and to discoloration caused by heat and aging. Foral 105-E has a substantially higher softening point and is therefore indicated where a harder resin is desired. It is also used in UV cured acrylics to improve adhesion to low surface energy substrates when high tack is not needed.

  • Compatible with UV acrylic adhesives
  • Excellent resistance to oxidation
  • High softening point
  • Improved adhesion to low surface energy substrates
  • Light color
  • Low odor
  • Thermoplastic hydrogenated resin
  • Wide solubility and compatibility range

Foral™ 85-E Ester of Hydrogenated RosinRosin ResinForal™ 85-E ester of hydrogenated gum rosin is a very pale, thermoplastic ester resin derived from glycerol and a highly stabilized rosin that has outstanding resistance to oxidation, and to discoloration caused by heat and aging.
Foral 85-E can be used as a tackifier resin in various types of adhesives, and in protective and barrier-type coatings that require a high degree of color retention and oxidation resistance. It is also used in UV cured acrylics to improve adhesion to low surface energy substrates.
  • Compatible with UV acrylic adhesives
  • Excellent resistance to oxidation and discoloration
  • Exceptional cutaneous tolerance
  • Improved adhesion to low surface energy substrates
  • Light color
  • Low odor
  • Medium softening point
  • Thermoplastic hydrogenated resin
  • Wide solubility and compatibility range
Foral™ AX-E Fully Hydrogenated RosinRosin ResinForal™ AX-E fully hydrogenated gum rosin is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is the palest, most highly stabilized rosin commercially available from Synthomer. Compared with Staybelite™ resin-E partially hydrogenated rosin, a hydrogenated rosin long established and widely used for its pale color and high oxidation resistance, Foral AX-E has better initial color and color retention, and even greater resistance to oxidation.
It is especially indicated as the tackifier and resin modifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties. It is also used in UV cured acrylics to improve adhesion to low surface energy substrates.
  • Alcohol-soluble
  • Compatible with UV acrylic adhesives
  • Excellent resistance to oxidation
  • High acid number
  • Improved adhesion to low surface energy substrates
  • Medium softening point
  • Thermoplastic hydrogenated resin
  • Very light color
Foralyn™ 110 Ester of Hydrogenated RosinRosin ResinForalyn™ 110 ester of hydrogenated gum rosin is the pentaerythritol ester of hydrogenated rosin.

This resin combines the feature of light initial color and good color retention with the advantages of excellent long-term retention of adhesive properties and UV light stability offered by Staybelite™ and Foral™ esters of hydrogenated rosin.
  • Excellent resistance to oxidation
  • High softening point
  • Light color
  • Low odor
  • Thermoplastic hydrogenated resin
  • Wide solubility and compatibility range
Foralyn™ 5020-F Ester of Hydrogenated RosinRosin ResinForalyn™ 5020-F Ester of Hydrogenated Gum Rosin, the methyl ester of hydrogenated rosin, is a light amber liquid resin. Being hydrogenated, it has marked resistance to aging. To assure minimum odor of products in which it is used, it is given a special steam-sparging treatment. Foralyn 5020-F is used as a resinous plasticizer or tackifier in finished products such as adhesives, inks, and lacquers.
  • Excellent fixative
  • Exceptional cutaneous tolerance
  • Liquid tackifier and plasticizer resin with excellent ageing characteristics
  • Low color
  • Low odor
  • Wide solubility and compatibility range
Foralyn™ 90 Ester of Hydrogenated RosinRosin ResinForalyn™ 90 ester of hydrogenated rosin is the glycerol ester of hydrogenated rosin. This resin combines the feature of light initial color and good color retention with the advantages of excellent long-term retention of adhesive properties and UV light stability offered by Staybelite™ and Foral™ esters of hydrogenated rosin.
  • Excellent resistance to oxidation
  • Light color
  • Low odor
  • Medium softening point
  • Thermoplastic hydrogenated resin
  • Wide solubility and compatibility range
Foralyn™ E Partially Hydrogenated RosinRosin ResinForalyn™ E Partially Hydrogenated Gum Rosin is a light colored, thermoplastic, acidic resin made by partially hydrogenating rosin. Because of this treatment, Foralyn E is highly resistant to oxidation and discolouration, and to changes in solubility characteristics when it is exposed to air and sunlight. Thermoplastic properties of Foralyn™ E make it particularly valuable as a plasticizer, tackifier or processing aid for reclaimed, natural, and synthetic rubbers. Foralyn E is also suggested for the preparation of synthetic resins, pigment coatings, soldering fluxes and caulking compounds.
  • Color stability
  • Exceptionally light color
  • High acid number
  • Resistant to oxidation
  • Wide solubility and compatibility range
Kristalex™ 1120 Hydrocarbon ResinPure Monomer ResinKristalex™ 1120 hydrocarbon resin is a water-white, highly color stable, nonpolar, low molecular weight thermoplastic polymer. This resin is compatible with a wide variety of oils, waxes, alkyds, plastics, and elastomers, and is soluble in many common organic solvents. It is indicated for use in plastics modification, adhesives, coatings, sealants, and caulks.

In EVA-based hot melt adhesives Kristalex™ 1120 has useful compatibility with EVA grades with up to 30% vinyl acetate and is useful in formulating low-color adhesives with improved high temperature resistance. In styrenic block copolymer based adhesives Kristalex™ 1120 preferentially associates with the styrenic endblocks, producing higher cohesion at temperatures up to 70°C without affecting tack and adhesion properties.
  • Excellent thermal stability
  • High softening point
  • Made from purified aromatic monomers
  • Water-white initial color
Kristalex™ 3070 Hydrocarbon ResinPure Monomer Resin

Kristalex™ 3070 hydrocarbon resin is a water-white, highly color stable, nonpolar, low molecular weight thermoplastic polymer. This resin is compatible with a wide variety of oils, waxes, alkyds, plastics, and elastomers, and is soluble in many common organic solvents. It is indicated for use in plastics modification, adhesives, coatings, sealants, and caulks. The low softening point of Kristalex™ 3070 indicates its potential utility in systems where performance at low temperatures such as frozen food packaging and exterior-use sealants.


In EVA-based hot melt adhesives Kristalex™ 3070 has useful compatibility with EVA grades with up to 30% vinyl acetate and is useful in formulating low-color adhesives with good low temperature properties. In adhesives based on styrenic block copolymers Kristalex™ 3070 is useful in reducing melt viscosity without affecting adhesion and tack properties.

  • Excellent thermal stability
  • Low softening point
  • Made from purified aromatic monomers
  • Water-white initial color

Kristalex™ 3100 Hydrocarbon ResinPure Monomer Resin

Kristalex™ 3100 hydrocarbon resin is a water-white, highly color stable, nonpolar, low molecular weight thermoplastic polymer. This resin is compatible with a wide variety of oils, waxes, alkyds, plastics, and elastomers, and is soluble in many common organic solvents. It is indicated for use in plastics modification, adhesives, coatings, sealants, and caulks.

In EVA-based hot melt adhesives Kristalex™ 3100 has useful compatibility with EVA grades with up to 30% vinyl acetate and is useful in formulating low-color adhesives with good low temperature properties. In styrenic block copolymer based adhesives Kristalex™ 3100 preferentially associates with the styrenic endblocks, producing higher room-temperature cohesion without affecting tack and adhesion properties. adhesion properties.

  • Excellent thermal stability
  • Intermediate softening point
  • Made from purified aromatic monomers
  • Water-white initial color

Kristalex™ 5140 Hydrocarbon ResinPure Monomer ResinKristalex™ 5140 hydrocarbon resin is a high softening point, low molecular weight resin produced by copolymerization of pure aromatic monomers. It is designed primarily for use as a modifier resin in high performance adhesives and coating compositions. In these applications, its water-white color, heat stability, and resistance to oxidation and discoloration are used to advantage.

In EVA-based hot melt adhesives, Kristalex™ 5140 has useful compatibility with EVA grades with 20%-40% vinyl acetate and is useful in formulating low-color adhesives with improved high temperature resistance. In styrenic block copolymer based adhesives, Kristalex™ 5140 preferentially associates with the styrenic endblocks, producing higher cohesion at temperatures up to 70°C without affecting tack and adhesion properties.
  • Excellent thermal stability
  • High softening point
  • High temperature resistance
  • Made from purified aromatic monomers
  • Water-white initial color
Kristalex™ 5140LV Hydrocarbon ResinPure Monomer ResinKristalex™ 5140LV hydrocarbon resin is a high softening point, low molecular weight resin with low organic volatile content produced by copolymerization of pure aromatic monomers. It is designed primarily for use as a modifier resin in high performance adhesives and coating compositions. In these applications, its water-white color, heat stability, and resistance to oxidation and discoloration are the advantages.

In EVA-based hot melt adhesives, Kristalex™ 5140LV has useful compatibility with EVA grades with 20%-40% vinyl acetate and is useful in formulating low-color adhesives with improved high temperature resistance. In styrenic block copolymer based adhesives, Kristalex™ 5140LV preferentially associates with the styrenic endblocks, producing higher cohesion at temperatures up to 70°C without affecting tack and adhesion properties.
  • Excellent thermal stability
  • High softening point
  • High temperature resistance
  • Low organic volatile content
  • Made from pure aromatic monomer
  • Water-white initial color
Kristalex™ F100 Hydrocarbon ResinPure Monomer ResinKristalex™ F100 hydrocarbon resin is a water-white, color stable, low molecular weight thermoplastic hydrocarbon polymer. Based on purified 8-9 carbon aromatic monomers, this resin is indicated for use in plastics modification, hot melt adhesives and coatings, sealants and caulks. Kristalex™ F100 is compatible with a wide variety of oils, waxes, alkyds, plastics, and elastomers, and is soluble in many common organic solvents.

In EVA-based hot melt adhesives Kristalex™ F100 has useful compatibility with EVA grades with up to 30% vinyl acetate and is useful in formulating low-color adhesives with good low temperature properties. In styrenic block copolymer based adhesives Kristalex™ F100 preferentially associates with the styrenic endblocks, producing higher room-temperature cohesion without affecting tack and adhesion properties.
  • Excellent thermal stability
  • Intermediate softening point
  • Made from purified aromatic monomers
  • Water-white initial color
Kristalex™ F115 Hydrocarbon ResinPure Monomer ResinKristalex™ F115 hydrocarbon resin is a water-white, color stable, low molecular weight thermoplastic hydrocarbon polymer. Based on purified 8-9 carbon aromatic monomers, this resin is indicated for use in plastics modification, hot melt adhesives and coatings, sealants and caulks. Kristalex™ F115 is compatible with a wide variety of oils, waxes, alkyds, plastics, and elastomers, and is soluble in many common organic solvents.

In EVA-based hot melt adhesives Kristalex™ F115 has useful compatibility with EVA grades with up to 30% vinyl acetate and is useful in formulating low-color adhesives with improved high temperature resistance. In styrenic block copolymer based adhesives Kristalex™ F115 preferentially associates with the styrenic endblocks, producing higher cohesion at temperatures up to 70°C without affecting tack and adhesion properties.
  • Excellent thermal stability
  • High softening point
  • Made from purified aromatic monomers
  • Water-white initial color
LIPATON™ SB 5521XSBR

Finely dispersed aqueous dispersion of a carboxylated styrene-butadiene copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, APEO, solvents and plasticizers.

LIPATON SB 5521 is a hydrophobic and elastic polymer. It is highly recommended for anti-corrosive primers and underbody coatings.

Metalyn™ 200 Methyl Ester of RosinRosin ResinMetalyn™ 200 methyl ester of gum rosin, a resinous plasticizer derived from rosin, is an amber-colored, tacky, viscous liquid. These physical properties, together with its wide compatibility, make it useful in a variety of applications, including lacquers, inks, adhesives, plastics, paper coatings and varnishes.
  • Alcohol-soluble
  • Compatible and miscible with a wide variety of materials
  • Excellent surface wetting and adhesion properties
  • Liquid plasticizer and tackifier
  • Low vapor pressure
Pentalyn™ 670-M ResinRosin ResinPentalyn™ 670-M resin is a partially esterized fumaric adduct of rosin, designed mainly for application in rotogravure inks, with modified RS nitrocellulose.
  • Compatible with acrylic resins
  • Compatible with nitrocellulose
Pentalyn™ H-E Ester of Hydrogenated RosinRosin ResinPentalyn™ H-E ester of hydrogenated gum rosin is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesive formulations, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack-imparting properties than ordinary rosin ester resins.
  • Excellent resistance to oxidation
  • High softening point
  • Light color
  • Low odor
  • Thermoplastic hydrogenated resin
  • Wide solubility and compatibility range
Permalyn™ 5095 Synthetic ResinRosin ResinPermalyn™ 5095 synthetic resin, a pale, thermoplastic resin, is the glycerol ester of gum rosin.

It is produced by a special process that yields a low-odor, low-acid-number resin that is suggested for use as a modifier for film-formers, elastomers, and waxes in various adhesives and protective coatings where pale color and minimal odor are required.
  • Low odor
  • Medium softening point
  • Resistant to thermal degradation
  • Thermoplastic resin
  • Very good color stability
  • Wide solubility and compatibility range
Permalyn™ 5110 Synthetic ResinRosin ResinPermalyn™ 5110 synthetic resin is a pentaerythritol ester of gum rosin. It has been designed for adhesive applications that require light initial color and good color stability. Permalyn 5110 is used as a resin modifier in elastomers, waxes, film-formers, and various adhesive and protective coating applications.
  • High softening point
  • Low odor
  • Resistant to thermal degradation
  • Thermoplastic resin
  • Very good color stability
  • Wide solubility and compatibility range
Permalyn™ 6110 Synthetic ResinRosin ResinPermalyn™ 6110 synthetic resin, a very pale, hard, thermoplastic resin, is a pentaerythritol ester of gum rosin. It is produced by a special process that yields a low-odor, light-colored, very stable product. Permalyn 6110 is used as a resin modifier in elastomers, waxes, film-formers, and various adhesive and protective coating applications.
  • High softening point
  • Light color
  • Low odor
  • Resistant to thermal degradation
  • Thermoplastic resin
  • Very good color stability
  • Wide solubility and compatibility range
Permalyn™ 6110-M Synthetic ResinRosin ResinPermalyn™ 6110-M is a high softening point, light color thermoplastic resin; it is a pentaerythritol ester of gum rosin, specially developed to be used in the Adhesives Industry. The special manufacturing process of this resin allows getting a product, which is highly resistant to oxidation, color retention and has minimum odor.
  • Color retention
  • Excellent thermoplastic resin
  • High oxidation resistance
  • High softening point
  • Light color
  • Minimal odor
Permalyn™ 8120 Rosin EsterRosin ResinPermalyn™ 8120 is a pentaerythritol ester of gum rosin which has been chemically modified to have a ring and ball softening point near 120°C. Permalyn™ 8120 has lower color, better color stability higher heat stability, and higher softening point than typical pentaerythritol rosin esters. It is potentially useful in hot melt adhesive and ink applications where a high softening point is desirable and especially in packaging hot melt adhesives where color and viscosity stability at application temperatures are critical.
  • Excellent heat stability
  • High softening point
  • Low color
  • Superior adhesion
Piccotac™ 1020 Hydrocarbon ResinSB-Dry

Piccotac™ 1020 hydrocarbon resin solution is an aliphatic, low molecular weight, liquid resin. Derived mainly from olefin monomers of petroleum origin, this pale neutral resin is characterized by its resistance to moisture, good heat and light stability, and excellent balance of tack and adhesive properties. It is stabilized with antioxidant.

It is designed primarily for use in pressure sensitive adhesives, hot melt adhesives and coatings. It is compatible with SIS block copolymers, natural rubber, polyisoprene, butyl rubber, and APO elastomers.

  • Aliphatic liquid resin used to increase tack and reduce viscosity
  • Excellent adhesion and compatibility to styrene-isoprene-styrene (SIS) block copolymers
  • Excellent compatibility in natural rubber
  • Excellent tack and peel properties
  • Light color, low odor
  • Resistance to oxidation
Piccotac™ 1020-E Hydrocarbon ResinSB-DryPiccotac™ 1020-E hydrocarbon resin is a liquid, low molecular weight hydrocarbon resin based on aliphatic monomers of petroleum origin. Piccotac™ 1020-E is pale in color, has good heat and light stability and contributes an excellent balance of tack and adhesive properties to systems blended with elastomers. Piccotac™ 1020-E is designed primarily for use in pressure sensitive and hot melt adhesives. It is stabilized with antioxidant.
  • Aliphatic liquid resin used to increase tack and reduce viscosity
  • Excellent adhesion in adhesives with styrene-isoprene-styrene (SIS) block copolymers
Piccotac™ 1095 Hydrocarbon ResinSB-DryPiccotac™ 1095 hydrocarbon tackifier resin is a narrow molecular weight distribution, aliphatic C5 tackifier designed for the adhesives industry. It has light color, low odor, and excellent thermal stability. It is compatible with SIS block copolymers, natural rubber, polyisoprene, butyl rubber, EVA, EnBA, mPE, mPP and APO elastomers. Piccotac™ 1095 is stabilized by addition of antioxidant.
  • Aliphatic low molecular weight C5 resin
  • Excellent adhesion in formulations with styrene-isoprene-styrene (SIS) block copolymers
  • Excellent color and stability
  • Excellent peel and tack properties
Piccotac™ 1095-N Hydrocarbon ResinSB-DryPiccotac™ 1095-N hydrocarbon tackifier resin is a narrow molecular weight distribution, aliphatic C5 tackifier designed for the adhesives industry. It has light color, low odor, and excellent thermal stability. It is compatible with SIS block copolymers, natural rubber, polyisoprene, butyl rubber, EVA, EnBA, mPE, mPP and APO elastomers. Piccotac™ 1095-N is stabilized by addition of antioxidant.
  • Aliphatic low molecular weight resin
  • Excellent adhesion to styrene-isoprene-styrene (SIS) block copolymers
  • Excellent color and color stability
  • Excellent peel and tack properties
Piccotac™ 1098 Hydrocarbon ResinSB-DryPiccotac™ 1098 hydrocarbon resin is a 100°C softening point, thermoplastic, low molecular weight, aliphatic C5 resin. Derived largely from mixed monomers of petroleum origin, it is characterized by its light color, excellent balance of tack and of adhesive and cohesive properties, heat resistance, and wide compatibility and solubility. Piccotac™ 1098 is stabilized by addition of antioxidant. It is designed primarily for use in pressure sensitive adhesives and hot melt adhesives and coatings.
  • Good adhesion to styrene-isoprene-styrene (SIS) block copolymers
  • Aliphatic C5 resin
  • Excellent adhesion in adhesives with natural rubber
  • Excellent color and color stability
  • Excellent peel and tack properties
Piccotac™ 1100 Hydrocarbon ResinSB-DryPiccotac™ 1100 hydrocarbon resin is a 100°C softening point, thermoplastic, moderate molecular weight, aliphatic C5 resin. Derived largely from mixed monomers of petroleum origin, it is characterized by its light color, excellent balance of tack and of adhesive and cohesive properties, heat resistance, and wide compatibility and solubility. It is designed as a reinforcing tackifier for use in NR and IR-based pressure sensitive adhesives and SBC-based hot melt adhesives, for polymer modifications and for coatings. Piccotac™ 1100 is stabilized by addition of antioxidant.
  • Aliphatic C5 resin
  • Excellent adhesion in formulations with styrene-isoprene-styrene (SIS) block copolymers
  • Excellent color and color stability
  • Excellent shear strength
  • Good balance of tack & peel properties
Piccotac™ 1100-E Hydrocarbon ResinSB-DryPiccotac™ 1100-E hydrocarbon resin is a low molecular weight, aliphatic hydrocarbon resin, derived mainly from dienes and other reactive monomers. It is characterized by its light color, excellent balance of tack and of adhesive and cohesive properties, heat resistance, and wide compatibility. Piccotac™ 1100-E is designed as a tackifier for various adhesive and hot melt compositions, particularly pressure-sensitive systems that require high cohesive and quick-stick properties. Piccotac™ 1100-E is stabilized by addition of antioxidant.
  • Aliphatic C5 resin
  • Excellent adhesion in formulations with Natural Rubber
  • Excellent color and color stability
  • Excellent peel and tack properties
  • Good adhesion in formulations with styrene-isoprene-styrene (SIS) block copolymers
Piccotac™ 1115 Hydrocarbon ResinSB-DryPiccotac™ 1115 hydrocarbon resin is a high softening point, thermoplastic, relatively high molecular weight, aliphatic C5 resin derived from dienes and other reactive olefin monomers. It is characterized by its light color, excellent balance of adhesive and cohesive properties, and broad compatibility and solubility. Piccotac™ 1115 is stabilized by addition of antioxidant. It is primarily for use in hot melt adhesives, pressure sensitive adhesives, and wax modification.
  • High softening point increases cohesion
  • Increased temperature resistance
  • Most aliphatic and highest molecular weight of the Synthomer tackifiers
Piccotac™ 7590-N Hydrocarbon ResinSB-DryPiccotac™ 7590-N hydrocarbon resin is an aromatic-modified, aliphatic hydrocarbon resin developed for the adhesives industry. Its specific degree of modification provides Piccotac™ 7590-N with an excellent compatibility with styrene-based thermoplastic elastomers, and in particular SBS (styrene-butadiene-styrene and SEBS (styrene-ethylene/butylene-styrene) block copolymers. It is also compatible with APAO (amorphous poly-alpha-olefins), metallocene-catalyzed polyolefins, SBR, EVA, and many polar elastomers. Due to its low odor and very good thermostability, Piccotac™ 7590-N is suggested as tackifying resin for high quality hot melt and hot melt pressure sensitive adhesives. Piccotac™ 7590-N is stabilized by addition of antioxidant.
  • Allows lower than usual hot melt coating temperatures
  • Excellent compatibility and performance in SBS and SEBS block copolymer HMPSA systems
  • Excellent compatibility with natural rubber, SBR and polyolefins
  • Good balance of peel and shear properties
  • Light color, low odor
  • Low softening point, good low temperature properties
Piccotac™ 8095 Hydrocarbon ResinSB-DryPiccotac™ 8095 hydrocarbon resin is a medium softening point, aromatic-modified aliphatic C5 tackifier designed to provide better odor and more cohesion than rosin esters for hot-melt packaging applications. It is compatible with styrene block copolymers, EVA, and many polar elastomers. This light colored resin is primarily used in hot melt adhesives and pressure sensitive adhesives. Piccotac™ 8095 is stabilized by the addition of antioxidant.
  • Aromatic modification to replace tall oil rosin ester
  • Excellent cohesion
  • Good compatibility with styrene block copolymers, EVA, and many polar elastomers
  • Higher cohesion and lower odor than rosin ester
  • Light color, low odor
  • Promotes low temperature properties
  • SBS tackifier
Piccotac™ 8595 Hydrocarbon ResinSB-DryPiccotac™ 8595 hydrocarbon resin is an aromatic-modified, aliphatic hydrocarbon resin developed for the adhesives industry. Its specific degree of modification and low molecular weight provides Piccotac™ 8595 with excellent compatibility in styrene block copolymers, amorphous polyolefins (APO), metallocene-polyolefins (mPE, mPP), EVA, and many polar elastomers. It is widely used to compatibilize different elastomers into a formulation to improve performance. It is primarily used in hot melt adhesives and pressure sensitive adhesives. Piccotac™ 8595 is stabilized by the addition of antioxidant.
  • Excellent balance of peel and shear
  • Excellent compatibility with EVA, APO and metallocene polymers for packaging adhesives
  • Excellent compatibility with and performance in SIS, and SIS/SBS block copolymer HMPSA systems
  • Light color, low odor
  • Slightly aromatic character
Piccotac™ 9095 Hydrocarbon ResinSB-DryPiccotac™ 9095 hydrocarbon resin is a low molecular weight, slightly aromatic-modified aliphatic C5 tackifier designed for the adhesives industry. This light colored resin is compatible with styrenic block copolymers, EVA, and many polar elastomers. It is widely used with other tackifier resins, such as rosin esters and C9 hydrocarbon tackifiers to improve performance. It is primarily used in hot melt adhesives and pressure sensitive adhesives. Piccotac™ 9095 is stabilized by the addition of antioxidant.
  • Aliphatic resin with a low level of aromatic-modification
  • Excellent adhesion in adhesives with styrene-isoprene-styrene (SIS) block copolymers
  • Excellent balance of peel and shear
  • Excellent compatibility with EVA, APO and metallocene polymers for packaging adhesives
  • Excellent peel and tack properties
  • Light color, low odor
Piccotac™ 9095-E Hydrocarbon ResinSB-DryPiccotac™ 9095-E hydrocarbon resin is a low molecular weight, slightly aromatic-modified aliphatic C5 tackifier designed for the adhesives industry. This light colored resin is compatible with styrenic block copolymers, EVA, and many polar elastomers.

It is widely used with other tackifier resins, such as rosin esters and C9 hydrocarbon tackifiers to improve performance. It is primarily used in hot melt adhesives and pressure sensitive adhesives. Piccotac™ 9095-E is stabilized by the addition of antioxidant.
  • Aliphatic resin with a low level of aromatic-modification
  • Excellent adhesion to styrene-isoprene-styrene (SIS) block copolymers
  • Excellent balance of peel and shear
  • Excellent compatibility with EVA, APO and metallocene polymers for packaging adhesives
  • Excellent peel and tack properties
  • Light color, low odor
Piccotex™ 100 Hydrocarbon ResinPure Monomer ResinPiccotex™ 100 hydrocarbon resin is the medium softening point member of in a series of highly stable, water-white, thermoplastic materials based on purified aromatic monomers. These resins have outstanding hot tack; heat sealability; resistance to discoloration; acid, alkali, and moisture resistance; and stability to elevated temperatures encountered in compounding. High initial and retained gloss, and improved application speeds on curtain coating and roll coating equipment. Piccotex™ 100 complies with some FDA regulations for applications involving direct contact with food. Compliance with a given regulation in a specific situation should be verified prior to use in a food contacting application.
  • Excellent thermal stability
  • Intermediate softening point
  • Made from purified aromatic monomers
  • Water-white initial color
Piccotex™ 120 Hydrocarbon ResinPure Monomer ResinPiccotex™ 120 hydrocarbon resin is the highest softening point member of a series of highly stable, water-white, thermoplastic materials based on purified aromatic monomers. These resins have outstanding hot tack; heat sealability; resistance to discoloration; acid, alkali, and moisture resistance; and stability to elevated temperatures encountered in compounding. High initial and retained gloss, and improved application speeds on curtain coating and roll coating equipment. In EVA-based hot melt adhesives Piccotex™ 120 has useful compatibility with EVA grades with 18-40% vinyl acetate and is useful in formulating low-color adhesives with improved cohesion and high temperature resistance.

Piccotex™ 120 complies with some FDA regulations for applications involving direct contact with food. Compliance with a given regulation in a specific situation should be verified prior to use in a food contacting application.
  • Excellent thermal stability
  • High softening point
  • Made from pure aromatic monomer
  • Water-white initial color
Piccotex™ 75 Hydrocarbon ResinPure Monomer ResinPiccotex™ 75 hydrocarbon resin is the lowest softening point member of in a series of highly stable, water-white, thermoplastic materials based on purified aromatic monomers. These resins have outstanding hot tack; heat sealability; resistance to discoloration; acid, alkali, and moisture resistance; and stability to elevated temperatures encountered in compounding. High initial and retained gloss, and improved application speeds on curtain coating and roll coating equipment. Piccotex™ 75 complies with some FDA regulations for applications involving direct contact with food. Compliance with a given regulation in a specific situation should be verified prior to use in a food contacting application.
  • Excellent thermal stability
  • Low softening point
  • Made from purified aromatic monomers
  • Water-white initial color
Piccotex™ LC Hydrocarbon ResinPure Monomer ResinPiccotex™ LC hydrocarbon resin is a medium softening point member of a series of highly stable, thermoplastic materials based on purified aromatic monomers. These resins have outstanding hot tack; heat sealability; resistance to discoloration; acid, alkali, and moisture resistance; and stability to elevated temperatures encountered in compounding. High initial and retained gloss, and improved application speeds on curtain coating and roll coating equipment. Piccotex™ LC complies with some FDA regulations for applications involving direct contact with food. Compliance with a given regulation in a specific situation should be verified prior to use in a food contacting application.
  • Excellent thermal stability
  • Intermediate softening point
  • Made from purified aromatic monomers
  • Water-white initial color
Picco™ A-10 Hydrocarbon ResinASAPicco™ A-10 hydrocarbon resin is a low molecular weight, resinous plasticizer derived largely from aromatic petroleum feedstock. It is characterized by its chemical inertness, excellent resistance to salts, acids, alkalis, water and brines, and its solubility in a wide variety of hydrocarbon solvents. Picco A-10 is indicated for use as a binder in lithographic (cold set) inks and as plasticizer, softener and tackifier for other resins and elastomers used in rubber compounding and various adhesive systems.
  • Excellent pigment wetting
  • Excellent resistance to acids, alkalis and moisture
  • Liquid plasticizer and tackifier
  • Non-reactive
  • Soluble in a wide variety of hydrocarbon solvents
Picco™ A-100 Hydrocarbon ResinASAPicco™ A-100 hydrocarbon resin, with its low softening point and molecular weight has a high level of compatibility in various polymers. It has excellent resistance to acids, alkalis and moisture, good resistance to oxygen, and is extremely water repellent. In addition, it provides excellent solvent release, tack and tack retention, excellent pigment wetting, and can be used with both reinforcing and non-reinforcing fillers. Picco A-100 is a viscous fluid at rubber-milling temperatures, and aids compounding by reducing viscosity and by adding tack while on the rolls. These advantages, combined with improvement in mold flow during cure, are obtained without lowering the cured hardness of the finished product. In styrenic block copolymer-based adhesives Picco A-100 preferentially associates with the styrenic end blocks, producing higher room-temperature cohesion without affecting tack and adhesion properties. Picco A-100 is also utilized frequently in EVA-based woodworking adhesives.
  • Excellent pigment wetting
  • Excellent resistance to acids, alkalis and moisture
  • Non-reactive
  • Thermoplastic
Picco™ A-120 Hydrocarbon ResinASAPicco™ A-120 hydrocarbon resin is a low molecular weight, amber colored thermoplastic resin produced from petroleum-derived monomers that is polymerized under conditions that control its softening point within a narrow range. Being non-polar, it is characterized by its excellent resistance to acids, alkalis and moisture and is extremely water repellent. It shows good color stability and, when formulated with elastomers, a good balance of flex, tear, tack and adhesion properties. In addition, Picco A-120 has excellent solvent release, tack and tack retention, wide solubility and compatibility, good resistance to oxygen and UV light, provides excellent pigment wetting and can be used with both reinforcing and non-reinforcing fillers. Picco A-120 is a viscous fluid at rubber-milling temperatures, and aids compounding by reducing viscosity and by adding tack while on the rolls. These advantages, combined with improvement in mold flow during cure, are obtained without lowering the cured hardness of the finished product. This resin is particularly indicated as a processing and reinforcing agent in rubber compounds and as a binder in protective coatings. In styrenic block copolymer-based adhesives Picco A-120 preferentially associates with the styrenic end blocks, producing higher cohesion at temperatures up to 70°C without affecting tack and adhesion properties. Picco A-120 is also utilized frequently in EVA-based woodworking adhesives.
  • Excellent pigment wetting
  • Excellent resistance to acids, alkalis and moisture
  • Non-reactive
  • Reinforcing resin for styrene block copolymers
  • Thermoplastic
Picco™ A-140 Hydrocarbon ResinASAPicco™ A-140 Hydrocarbon Resin is a low molecular weight, amber colored thermoplastic resin produced from petroleum-derived monomers that is polymerized under conditions that control its softening point within a narrow range. It is characterized by its excellent resistance to acids, alkalis and moisture. It shows good color stability and, when formulated with elastomers, a good balance of flex, tear, tack and adhesion properties. In styrenic block copolymer-based adhesives Picco A-140 preferentially associates with the styrenic end blocks, producing higher cohesion at temperatures up to 70°C without affecting tack and adhesion properties. Picco A-140 is particularly indicated as a processing and reinforcing agent in rubber compounds and as binder in protective coatings. It is also utilized in EVA-based woodworking adhesives.
  • Excellent pigment wetting
  • Excellent resistance to acids, alkalis and moisture
  • Excellent water repellant
  • Non-reactive
  • Reinforcing resin for styrene block copolymers
  • Thermoplastic
Picco™ AR-100 Hydrocarbon ResinASAPicco™ AR-100 Hydrocarbon Resin is a low molecular weight, modified aromatic hydrocarbon resin. This resin has good solubility in aliphatic and aromatic hydrocarbons and is compatible with a wide variety of thermoplastic and elastomeric polymers. It is utilized frequently in EVA-based woodworking adhesives and finds widespread use in pressure sensitive adhesives, particularly in systems containing natural rubber or styrene-butadiene rubber (SBR). It offers an excellent balance of tack, adhesion and cohesive properties to pressure sensitive systems. In styrenic block copolymer-based adhesives Picco AR-100 preferentially associates with the styrenic end blocks, producing higher room-temperature cohesion without affecting tack and adhesion properties.
  • Broad compatibility and solubility
  • Non-reactive
  • Reinforcing tackifier resin for many polymers used in the adhesive industry
Picco™ AR-85 Hydrocarbon ResinASAPicco™ AR-85 hydrocarbon resin is a low molecular weight, modified aromatic hydrocarbon resin. This resin has good solubility in aliphatic and aromatic hydrocarbons and is compatible with a wide variety of thermoplastic and elastomeric polymers. Picco AR-85 is utilized in EVA-based woodworking adhesives. In addition, it is widely used in pressure sensitive adhesives, particularly in systems containing natural rubber or SBR. It offers an excellent balance of tack, adhesion and cohesive properties. In styrenic block copolymer-based adhesives Picco AR-85 preferentially associates the styrenic end blocks, producing lower melt viscosity while maintaining room-temperature cohesion without affecting tack and adhesion properties.
  • Broad compatibility and solubility
  • Non-reactive
  • Reinforcing tackifier resin for many polymers used in the adhesive industry
Plastolyn™ 240 Hydrocarbon ResinPure Monomer ResinPlastolyn™ 240 hydrocarbon resin is a versatile, aromatic, water-white, high softening point resin for use in polymer modification, adhesives, overprint lacquers, coatings and a variety of other applications. Recommended as a flow modifier in such polymers as polyvinylchloride (PVC), acrylonitrile-butadiene-styrene (ABS) and stryenic block copolymers. Its water-white color and good economy, combined with superior heat and ultraviolet light (UV) stability compared with conventional C9 hydrocarbon resins, provide formulators a new level of quality without sacrificing competitiveness.
  • Color stability
  • High softening point
  • Low color
  • Made from purified aromatic monomers
Plastolyn™ 290 Hydrocarbon ResinPure Monomer ResinPlastolyn™ 290 hydrocarbon resin is a versatile, aromatic, water-white, very high softening point resin for use in polymer modification, adhesives, overprint lacquers, coatings and a variety of other applications. Recommended as a flow modifier in such polymers as polyvinylchloride (PVC), acrylonitrile-butadiene-styrene (ABS) and styrenic block copolymers. Its water white color and good economy, combined with superior heat and ultraviolet light (UV) stability compared with conventional C9 hydrocarbon resins, provide formulators a new level of quality without sacrificing competitiveness.
  • Color stability
  • Low color
  • Made from purified aromatic monomers
  • Very high softening point
Plastolyn™ 290LV Hydrocarbon ResinPure Monomer ResinPlastolyn™ 290LV hydrocarbon resin is aromatic, water-white, very low organic volatile content and very high softening point for use in polymer modification, adhesives, overprint lacquers, coatings and a variety of other applications. Recommended as a flow modifier in such polymers as polyvinylchloride (PVC), acrylonitrile-butadiene-styrene (ABS) and styrenic block copolymers. Its water white color and low organic volatiles combined with superior heat and ultraviolet light (UV) stability compared with conventional C9 hydrocarbon resins, provide formulators a new level of quality without sacrificing competitiveness.
  • Color stability
  • Low color
  • Low organic volatile content
  • Made from purified aromatic monomer
  • Very high softening point
Plastolyn™ R1140 Hydrocarbon ResinNBR-DryPlastolyn™ R1140 hydrocarbon resin is an amorphous, low-molecular-weight hydrocarbon resin derived from aromatic petrochemical feedstocks. The resin is fully hydrogenated to a saturated cyclo-aliphatic structure that is highly compatible with polyolefin polymers. This resin is suggested for use as a modifier of polyolefin polymers.
  • Color stability
  • Excellent compatibility with PP. PE, SEBS and butyl rubbers
  • Excellent heat stability
  • Low odor and volatility
  • Water-white color, fully hydrogenated
PLEXTOL™ R 5530PA

PLEXTOL R 5530 is a fine particle size, surfactant stabilised aqueous dispersion of a crosslinked methacrylic ester-acrylic ester copolymer. PLEXTOL R 5530 offers good adhesion and salt spray resistance with a very good adhesion to different substrates.

PLEXTOL R 5530 is recommended for anti-corrosion and Direct to Meta applications with excellent salt spray resistance and perfect adhesion to many substrates. Plextol R 5530 is suitable also for multi-substrate primer formulations.

PLIOLAK™ AF 475ALK

Pliolak AF 475 is a Solvent-based medium-oil alkyd resin based on vegetable fatty acids.

Pliolak AF 475 is mainly suitable for the manufacturing of fast-drying industrial enamels. Pliolak AF 475 65 % in Xylene is suitable for the manufacturing of enamels finished with xylene.

It may also be used in forced-drying enamels (between 60 ºC and 100 ºC) as sole binder or in combination with melamine resins.


The resin contains 47% oil and 27% phthalic anhydrid.

Delivery form : (1) 55% in White Spirit/Xylene or (2) 65% in Xylene


PLIOLAK™ AF 654 EALK

Pliolak AF 654E is a Solvent-based long-oil drying alkyd resin based on vegetable fatty acids.

Pliolak AF 654E is recommended as sole binder or in combination with other alkyd resins for the formulation of decorative enamels and varnishes.

It can also be used for the production of primers and anti-corrosion paints.

The resin contains 65% Oil and 26% Phthalic Anhydride  

Delivery form 70 % in White Spirit

PLIOLAK™ AM 342ALK

Pliolak AM 342 is a Solvent-based short-oil alkyd resin, phenolic and rosin modified for industrial primers and colorful enamels, as well as hammer finishes.

Pliolak AM 342 provides fast drying, high hardness, good metal adhesion and chemical resistance.
Delivery form 50 % in Xylene

PLIOLAK™ AS 245ALK

Pliolak AS 245 is a Solvent-based short-oil drying alkyd resin based on soya-bean oil.

Pliolak AS 245 is specially recommended for the formulation of fast drying enamels, as well as bitumens and anticorrosive primers. It may also be used as plasticizer in combination with melamine resins for stoving enamels as well as with nitrocellulose and also for acid curing lacquers.

Pliolak AS 245 is suitable for the formulation of two components clear topcoats for wood furniture, in combination with isocyanates.

The 100% resin contains 24 % Oil and 39 % Phthalic Anhydride  

Delivery form 60 % in Xylene

PLIOLAK™ AS 284ALK

Pliolak AS 284 is a Solvent-based short-oil alkyd resin mainly recommended for industrial enamels, anti-corrosive primers, lacquers and clear topcoats for wood.

The resin contains 22% oil and 40% phthalic anhydrid.

Delivery form 60% in Xylene


PLIOLAK™ AV 303ALK

Pliolak AV 303 is a Solvent-based short-oil modified alkyd resin for industrial enamels.

Pliolak AV 303 provides extremely fast drying even in unfavorable climatic conditions.  

The 100% resin contains 30% oil.  

Delivery form 60 % in Xylene.


PLIOLITE™ AC4OTH

Pliolite AC4 is a styrene-acrylate copolymer, often used in combination with Pliolite AC80, to form tough abrasion and chemically resistant films that have excellent UV resistance and exterior weathering properties.

Solvent based thixotropic resin for low to high textured exterior masonry coatings, primers, anti-corrosion coatings, concrete protection and intumescent coatings.


PLIOLITE™ AC80OTH

Pliolite AC80, often used in combination with Pliolite AC4 or Pliolite AC5G,  forms though abrasion and chemically resistant films that have excellent adhesion, UV resistance and exterior weathering properties.

Newtonian resin for exterior masonry coatings, anticarbonation, metal protective and intumescent coatings.

PLIOTEC™ HDT12SA

Modified styrene-acrylic copolymer latex based on Hydrophobic Dispersion Technology, with excellent adhesion to metals, and superior water resistance, delivering corrosion protection even without the use of anticorrosive pigments.

Pliotec HDT12 is recommended for Direct-To-Metal (DTM) coatings, from high gloss enamels to anticorrosive primers.

PLIOTEC™ HDT12 MSA

Modified styrene-acrylic copolymer latex based on Hydrophobic Dispersion Technology, with excellent adhesion to metals, and superior water resistance, delivering corrosion protection even without the use of anticorrosive pigments.

Pliotec HDT12 M is recommended for Direct-To-Metal (DTM) coatings, from high gloss enamels to anticorrosive primers.

PLIOTEC™ HDT16SA

Pliotec HDT16 modified styrene-acrylic copolymer latex provides excellent water and corrosion resistance, fast hardness development and superior adhesion to a wide variety of substrates (ferrous and non-ferrous metals, ceramic tiles, PVC and more).


Water-based resin for anti-corrosion paints and primers, Direct-To-Metal (DTM) coatings and multi-surface renovation paints.

Poly-Pale™ Partially Dimerized RosinRosin ResinPoly-Pale™ resin is a pale, partially polymerized (dimerized) gum rosin. Compared with pale grades of regular wood, gum, or tall oil rosins, it has a higher softening point, higher viscosity (molten and in solution), much greater resistance to oxidation, and complete freedom from crystallizing when in solid form or in solution. Its many uses include the preparation of varnishes, driers, synthetic resins, ink vehicles, floor tile, rubber compounds, solder fluxes, and various adhesives and protective coatings.
  • Alcohol-soluble
  • High softening point
  • Non-crystalline
  • Resistant to oxidation
  • Thermoplastic rosin acid
Regalite™ C6100L Hydrocarbon ResinNBR-DryRegalite™ C6100L Hydrocarbon Resin is a hydrogenated water-white hydrocarbon resin developed derived from petrochemical feedstocks. This resin is especially designed as a component of a multipart tackifier system in hot melt and solvent based pressure sensitive adhesives based on SIS, SBS and SEBS thermoplastic block copolymers, providing superior tack, adhesion and cohesive strength characteristics.
  • Excellent heat stability
  • Water-white color
  • Wide compatibility
Regalite™ R1010 Hydrocarbon ResinNBR-DryRegalite™ R1010 hydrocarbon resin is a liquid hydrogenated, water-white, low molecular weight resin derived from petrochemical feedstocks. This resin is especially designed as a component of a multipart tackifier system in hot melt and solvent based pressure sensitive adhesives based on SIS and SBS thermoplastic block copolymers, providing superior tack, adhesion and cohesive strength characteristics.
  • Excellent heat stability
  • Water-white color
  • Wide compatibility
Regalite™ R1090 Hydrocarbon ResinNBR-DryRegalite™ R1090 hydrocarbon Rrsin is a low molecular weight fully hydrogenated, water-white, inert, thermoplastic resin derived from petrochemical feedstocks. This resin is especially designed as tackifier in hot melt adhesives based on EVA copolymers and SIS block copolymers requiring excellent color retention upon aging.
  • Excellent heat stability
  • Water-white color
  • Wide compatibility
Regalite™ R1100 Hydrocarbon ResinNBR-Dry

Regalite™ R1100 hydrocarbon resin is a low molecular weight fully hydrogenated, water-white, inert, thermoplastic resin derived from petrochemical feedstocks. This resin is especially designed as tackifier in hot-melt adhesives requiring excellent color retention upon aging.

  • Excellent heat and UV stability
  • Water-white color
  • Wide compatibility

Regalite™ R1125 Hydrocarbon ResinNBR-Dry

Regalite™ R1125 hydrocarbon resin is a low molecular weight fully hydrogenated water-white inert thermoplastic resin derived from petrochemical feedstocks. This resin is particularly useful as tackifier for hot melt systems based on EVA copolymers and SIS block copolymers.

Regalite™ R7100 Hydrocarbon ResinNBR-Dry

Regalite™ R7100 hydrocarbon resin is a partially hydrogenated water-white inert thermoplastic resin derived from petrochemical feedstocks. This resin is especially designed as a tackifier in hot melt adhesives based on SBS block copolymers, providing excellent color retention upon aging.

Regalite™ S1100 Hydrocarbon ResinNBR-Dry

Regalite™ S1100 hydrocarbon resin is a low molecular weight fully hydrogenated water-white thermoplastic resin derived from petrochemical feedstock. This resin is especially designed as tackifier in hot melt adhesives requiring good color retention upon ageing.

Regalite™ S5090 Hydrocarbon ResinNBR-Dry

Regalite™ S5090 hydrocarbon resin is an unique partially hydrogenated water-white inert thermoplastic resin derived from petrochemical feedstock.

Regalite™ S5100 Hydrocarbon ResinNBR-DryRegalite™ S5100 hydrocarbon resin is a unique partially hydrogenated water-white inert thermoplastic resin derived from petrochemical feedstock. This resin is especially designed as a tackifier in hot melt adhesives based on SIS and SBS block copolymers, where it provides superior room temperature cohesion combined with very low adhesive viscosity.
  • Good compatibility with styrene block copolymers, EVA, and many polar elastomers
  • SBS tackifier
  • Very good resistance to thermal and oxidative degradation
  • Water-white initial color
Regalite™ S7125 Hydrocarbon ResinNBR-Dry

Regalite™ S7125 hydrocarbon resin is a partially hydrogenated water-white inert thermoplastic resin derived from petrochemical feedstocks. This resin is especially designed as a tackifier in hot melt adhesives based on EVA, SIS and SBS copolymers, providing low odor and good color retention upon ageing.

Regalrez™ 1018 Hydrocarbon ResinHydrogenated Pure Monomer ResinRegalrez™ 1018 hydrocarbon resin is produced by polymerization and hydrogenation of pure monomer hydrocarbon feedstocks. Regalrez™ 1018 is a highly stable, light colored, low molecular weight, nonpolar liquid resin suggested for use in plastics modification, adhesives, coatings, sealants, and caulks. Due to its fully hydrogenated cycloaliphatic structure and low softening point Regalrez™ 1018 is useful as a plasticizer in systems where low color and thermal stability are primary concerns and plasticizer migration must be minimized.
  • Excellent thermal and UV stability
  • Fully hydrogenated
  • Highly stable
  • Liquid
  • Water-white color
Regalrez™ 1085 Hydrocarbon ResinHydrogenated Pure Monomer ResinRegalrez™ 1085 hydrocarbon resin is produced by polymerization and hydrogenation of pure monomer hydrocarbon feedstocks. It is highly stable, light colored, low molecular weight, nonpolar resin suggested for use in adhesives, coatings, sealants, and caulks. Regalrez™ 1085 is especially suited to applications where the lowest color and most stability against weathering and thermal degradation is required. Regalrez™ 1085 is suggested for use in elastomeric sealants and adhesives tapes where outdoor exposure will occur or where clarity and resistance to yellowing is a requirement. Due to its relatively low softening point Regalrez™ 1085 is especially useful in formulating systems designed to perform at low service temperatures such as freezer labels or exterior-use sealants. Regalrez™ 1085 contains no added antioxidants or UV stabilizers.
  • Excellent thermal and UV stability
  • Fully hydrogenated
  • Highly stable
  • Low softening point
  • Water-white color
Regalrez™ 1094 Hydrocarbon ResinHydrogenated Pure Monomer ResinRegalrez™ 1094 hydrocarbon resin is produced by polymerization and hydrogenation of pure monomer hydrocarbon feedstocks. Regalrez™ 1094 is a highly stable, light colored, low molecular weight, nonpolar resin suggested for use in plastics modification, adhesives, coatings, sealants, and caulks. Regalrez™ 1094 is especially suited to applications where the lowest color and most stability against weathering and thermal degradation is required. Regalrez™ 1094 is suggested for use in elastomeric sealants and adhesives tapes where outdoor exposure will occur or where clarity and resistance to yellowing is a requirement. Regalrez 1094 contains no added antioxidants or UV stabilizers.
  • Excellent thermal and UV stability
  • Fully hydrogenated
  • Highly stable
  • Low odor
  • Water-white color
Regalrez™ 1126 Hydrocarbon ResinHydrogenated Pure Monomer ResinRegalrez™ 1126 hydrocarbon resin is produced by polymerization and hydrogenation of pure monomer hydrocarbon feedstocks. Regalrez™ 1126 is a highly stable, light colored, low molecular weight, nonpolar resin suggested for use in plastics modification, adhesives, coatings, sealants, and caulks. Regalrez™ 1126 is especially suited to applications where the lowest color and most stability against weathering and thermal degradation is required. Regalrez™ 1126 is suggested for use in elastomeric sealants and adhesives tapes where outdoor exposure will occur or where clarity and resistance to yellowing is a requirement. Regalrez™ 1126 contains no added antioxidants of UV stabilizers.
  • Excellent thermal and UV stability
  • Fully hydrogenated
  • Highly stable
  • Provides excellent barrier properties and low oxygen permeability
  • Water-white color
Regalrez™ 3102 Hydrocarbon ResinHydrogenated Pure Monomer ResinRegalrez™ 3102 hydrocarbon resin is produced by polymerization and partial hydrogenation of pure monomer hydrocarbon feedstocks. It is highly stable, light colored, low molecular weight resin suggested for use in adhesives, coatings, sealants, and caulks. Due to its low color, high stability and balance of cycloaliphatic and aromatic structure, Regalrez™ 3102 provides a breadth of compatibility that is not possible with a purely aromatic or aliphatic resin. It is suggested for use in applications where fully hydrogenated resins or pure monomer aromatic resins are incompatible or do not give the desired balance of properties.
  • Excellent thermal and UV stablity
  • High aromatic content
  • Highly stable
  • Low color
  • Partially hydrogenated
  • Water-white color
Regalrez™ 6108 Hydrocarbon ResinHydrogenated Pure Monomer ResinRegalrez™ 6108 hydrocarbon resin is produced by polymerization and partial hydrogenation of pure monomer hydrocarbon feedstocks. It is highly stable, light colored, low molecular weight resin suggested for use in adhesives, coatings, sealants, and caulks. Due to its low color, high stability and balance of cycloaliphatic and aromatic structure, Regalrez™ 6108 provides a breadth of compatibility that is not possible with a purely aromatic or aliphatic resin. It is suggested for use in applications where fully hydrogenated resins or pure monomer aromatic resins are incompatible or do not give the desired balance of properties. In hot melt adhesives based on styrene block copolymers, it provides excellent room temperature cohesion with low adhesive viscosity.
  • Excellent thermal and UV stability
  • Highly stable
  • Low odor
  • Partially hydrogenated
  • Water-white color
  • Wide compatibility
REVACRYL™ AE 6030SA

Finely dispersed aqueous dispersion of a styrene-acrylic ester copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, APEO, solvents and plasticizers.

REVACRYL AE 6030 is a hydrophobic styrene-acrylic dispersion. It shows an excellent adhesion to various metal substrate and a high water-resistance. It is highly recommended for anti-corrosive primers and non-decorative metal monocoats.

Staybelite™ Ester 10-E Ester of Hydrogenated RosinRosin ResinStaybelite™ ester 10-E ester of hydrogenated gum rosin is a pale, thermoplastic resin with the excellent resistance to oxidation and discoloration characteristic of ester resins derived from hydrogenated rosin. It is a glycerol ester of rosin that has been stabilized by hydrogenation and has found wide acceptance as a tackifying resin for many adhesive applications, particularly pressure-sensitive, hot melt and emulsion types. In general, it is useful where there is need for a pale, nonoxidizing, color-stable resin.
  • Easily emulsifiable
  • Excellent resistance to oxidation
  • Light color
  • Low odor
  • Medium softening point
  • Thermoplastic hydrogenated resin
  • Wide solubility and compatibility range
Staybelite™ Ester 3-E Ester of Hydrogenated RosinRosin ResinStaybelite™ ester 3-E ester of hydrogenated gum rosin is a pale, viscous, balsamic liquid with the resistance to oxidation and discoloration characteristic of the Staybelite series of resins. The tacky, highly adhesive resin can be readily emulsified, and serves as plasticizer for a wide range of film formers.

Staybelite ester 3-E is broadly compatible with many other components, and it has found wide acceptance in hot melt, pressure sensitive, and laminating adhesives. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, highly tacky liquid resin.
  • Good resistance to oxidation and discoloration
  • High viscous tackifier resin with excellent ageing characteristics
  • Light color
  • Low odor
  • Wide solubility and compatibility range
Staybelite™ Resin-E Partially Hydrogenated RosinRosin ResinStaybelite™ resin-E partially hydrogenated rosin is a pale, thermoplastic, acidic resin made by partially hydrogenating rosin. Because of this treatment, Staybelite resin-E partially hydrogenated rosin is highly resistant to oxidation and discolouration, and to changes in solubility characteristics when it is exposed to air and sunlight.
  • Color stability
  • High acid number
  • Light color
  • Low odor
  • Resistant to oxidation
  • Wide solubility and compatibility range
Synthomer™ G-3003 PolymerAmorphous PolyolefinSynthomer™ G-3003 is a maleic anhydride grafted polypropylene recommended as a coupling agent for polypropylene (PP) composites. Because of the polarity and anhydride functionality, Synthomer™ G-3003 is useful for laminating, as a compatibilizer for PP blends with nylon or EVOH, and for enhancing the strength of composites that utilize reinforcements / fillers such as glass, talc, calcium carbonate, and metals.
  • Balances attraction between polar fillers / reinforcements and non polar polymers
  • Coupling agent for PP composites
  • Maleic anhydride grafted polypropylene (PP)
Synthomer™ G-3015 PolymerAmorphous PolyolefinSynthomer™ G-3015 is a maleic anhydride grafted polypropylene recommended as a coupling agent for polypropylene (PP) composites. Because of the polarity and anhydride functionality, Synthomer™ G-3015 is useful for laminating, as a compatibilizer for PP blends with nylon or EVOH, and for enhancing the strength of composites that utilize reinforcements / fillers such as glass, talc, calcium carbonate, and metals. 
  • Balances attraction between polar fillers / reinforcements and non polar polymers
  • Coupling agent for PP composites
  • Maleic anhydride grafted polypropylene (PP)
Tacolyn™ 1070 Resin DispersionTackifier DispersionTacolyn™ 1070 resin dispersion is an aqueous, 55% solids, solvent-free, anionic hydrocarbon dispersion. It is recommended as a tackifier for acrylic latex polymers used in label, tape, and construction adhesive applications. As a modifier for these latexes, Tacolyn™ 1070 enhances specific adhesion to polyolefin substrates and recycled corrugated board. It promotes cohesive strength and offers good moisture resistance when used in pressure sensitive adhesives. It may be used in clear film label applications due to its good color retention and oxidation resistance.
  • APE-free
  • Enhances specific adhesion to polyolefin substrates and recycled corrugated board
  • Good moisture resistance
  • Good thermal and UV stability
  • Promotes cohesion
Tacolyn™ 3400 Resin DispersionTackifier DispersionTacolyn™ 3400 resin ester dispersion is an aqueous, 55% solids, solvent-free, anionic rosin ester dispersion prepared from a highly hydrogenated, high softening point resin. It is recommended for use in food packaging applications such as closures, lidding, and cold seal adhesives, as well as pressure sensitive adhesives that contact food. Tacolyn™ 3400 is also used in adhesives applications requiring higher temperature strength such as in high temperature masking tapes, packaging tapes, and contact adhesives.
  • APE-free
  • Direct food contact FDA clearances
  • Excellent thermal and UV stability
  • Good moisture resistance
  • Promotes high temperature performance
Tacolyn™ 3570 Resin DispersionTackifier DispersionTacolyn™ 3570 Resin Dispersion is an anionic, aqueous, solvent-free, and APE (alkylphenol ethoxylate) free dispersion of a stabilized rosin ester. It is designed for use in pressure sensitive adhesives based on acrylic polymer emulsions or carboxylated SBR polymer emulsions, where it greatly enhances the tack and peel to polyethylene and carton board
  • APE-free
  • Broad compatibility
  • Excellent silicone liner wetting
  • Excellent thermal and UV stability
  • Good pigment and substrate wetting
  • Good storage and mechanical stability
  • Improves adhesion to polyethylene and polypropylene packaging substrates
  • Light color
  • Low surface tension
  • Outstanding tackifier in waterborne adhesives
  • Resistance to acids and alkalies
Tacolyn™ 5002 Resin DispersionTackifier DispersionTacolyn™ 5002 resin dispersion is an aqueous, 55% solids, solvent-free, anionic hydrocarbon resin dispersion. It is recommended as a tackifier for natural rubber and styrene butadiene rubber latex polymers used in label, tape, construction, and contact adhesive applications. As a modifier for pressure sensitive label and tape adhesives, Tacolyn™ 5002 provides a good balance of peel and shear and enhances specific adhesion to polyolefin substrates and recycled corrugated board. Tacolyn™ 5002 is recommended for water-based contact adhesives where fast break properties are required as in foam to foam bonding applications.
  • APE-free
  • Broad utility as a general purpose SBR tackifier
  • Enhances specific adhesion to polyolefin substrates and recycled corrugated board
  • Good moisture resistance
  • Good thermal and UV stability
  • Promotes cohesion
Tacolyn™ 5070 Resin DispersionTackifier DispersionTacolyn™ 5070 resin dispersion is an aqueous, 50% solids, solvent-free anionic aliphatic hydrocarbon dispersion prepared from a low molecular weight, aliphatic C5 hydrocarbon resin. It is recommended as a tackifier for isoprene rubber and natural rubber latex polymers used in tape applications. Tacolyn™ 5070 is ideal for low peel applications because it imparts peel strength in small increments relative to resination level. It exhibits good storage and mechanical stability and outstanding stability to acids. Tacolyn™ 5070 is also highly resistant to acids and alkalies.
  • Broad utility as a general purpose isoprene and natural rubber tackifier
  • Exhibits good storage and mechanical stability
  • Highly resistant to acids and alkalies
  • Promotes low peel

Contact Us

We welcome your questions and comments. To make a general enquiry or to find out more about a specific Synthomer product, please get in touch.

Contact us