Boost the performance of your construction adhesives
Key features:
- Better adhesion on porous and non-porous substrates
- Improved durability of the final product
- Increased resistance to chemicals
- Superior flexural strength
- Minimised water uptake.
Synthomer polymers improve the performance of your ceramic tile and ETICS adhesives. Our polymer dispersions are highly regarded by manufacturers of high-performance paste ceramic tile adhesives, also known as mastics, as they enable the creation of value-added, ready-to-use products.
Our product range also includes high-performance redispersible polymer powders. In addition to our proven aqueous polymers, these ensure we can deliver superior performance across your complete portfolio of ceramic tile adhesives.
We supply vinyl acetate veova-based redispersible powders, as wells as styrene butadiene-based redispersible powders that will ensure your ceramic tile adhesives deliver high hydrolysis resistance, low water uptake, fast redispersibility and excellent adhesion, even under wet conditions.
Tradename | Chemistry | Description |
---|---|---|
Dresinate™ TX-60W Rosin Soap | Rosin Resin | Dresinate™ TX-60W Rosin Soap is a 60% solids, aqueous solution of a fully saponified sodium soap of tall oil. It is designed mainly as the soap emulsifier in the manufacture of road surfacing asphalt anionic emulsions of the RS and MS types.
|
LIPATON™ SB 29Y146 | XSBR | LIPATON SB 29Y146 is a water-based non-ionically stabilized hydrolysis-resistant dispersion of a carboxylated styrene-butadiene copolymer. The dispersion is freeze-thaw stable. It contains an antioxidant and an antifoam and is compatible with most hydraulic binders.This product is free from APEOs and ammonia. |
LIPATON™ SB 30Y160 | XSBR | LIPATON SB 30Y160 is a non-ionically stabilized, hydrolysis-resistant carboxylated styrenebutadiene copolymer latex. The dispersion contains an antioxidant and an antifoam agent, which is very effective for its use in hydraulic binders. This product is free from APEOs and ammonia. |
LIPATON™ SB 5843 | XSBR | LIPATON SB 5843 is a ready-for-use aqueous dispersion of a styrene-butadiene copolymer with high stability against electrolytes. It contains an APEO free anionic/nonionic emulsifier system and is free from film forming aids, solvents, plasticizers, and ammonia. LIPATON SB 5843 contains a special defoamer to reduce the air content in cement mortars. |
PLEXTOL™ D 335 | PA | PLEXTOL D 335 is a high solids aqueous dispersion of a modified acrylic copolymer. The dispersion contains an anionic, APEO free emulsifier system and is free from film forming aids, solvents and plasticizers. |
PLEXTOL™ E 303 | PA | PLEXTOL E 303 is an aqueous high solids dispersion of an acrylic ester copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, solvents and plasticizers. |
REVACRYL™ AE 3020 | SA | REVACRYL AE 3020 is a finely dispersed, aqueous dispersion of an acrylic ester-styrene copolymer designed for construction applications including waterproofing and ceramic tile adhesives. The dispersion contains an anionic emulsifier system and is free from film forming aids, solvents and plasticizers. |
REVACRYL™ AE 3723 | SA | REVACRYL AE 3723 is a finely dispersed, aqueous dispersion of an acrylic ester-styrene copolymer for construction applications including tile adhesives. REVACRYL AE 3723 contains an anionic emulsifier system and is free from film forming aids, APEO, solvents, plasticizers and ammonia. It has a very low VOC content (< 300 ppm) and is highly recommended for ecolabel compliant products. |
REVACRYL™ AE 3737 | SA | REVACRYL AE 3737 is a finely dispersed, aqueous dispersion of an acrylic ester-styrene copolymer designed for construction applications including waterproofing and ceramic tile adhesives. The dispersion contains an anionic emulsifier system and is free from film forming aids, solvents, plasticizers and ammonia. |
REVACRYL™ AE 4522 | SA | REVACRYL AE 4522 is a specially modified, aqueous dispersion of a styrene-acrylic ester copolymer for waterproofing and tile adhesive applications. The polymer is engineered for excellent wet adhesion. REVACRYL AE 4522 contains an anionic emulsifier system and is free from film forming aids, solvents and plasticizers. |
REVACRYL™ AE 4530 | SA | REVACRYL AE 4530 is a specially modified, aqueous dispersion of a styrene-acrylic ester copolymer intended to achieve good wet adhesion. The dispersion contains an anionic emulsifier system and is free from film forming aids, solvents, plasticizers, and ammonia. |
REVACRYL™ AE 4625 | SA | REVACRYL AE 4625 is a finely dispersed, aqueous dispersion of a styrene-acrylic ester copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, solvents, plasticizers and ammonia. |
REVACRYL™ L 8761 | SA | REVACRYL L 8761 is a anionic acrylic ester and styrene copolymer for various construction applications like ceramic tile adhesives. |
REVACRYL™ R 478 | SA | REVACRYL R 478 is a styrene acrylic copolymer dispersion containing antifoam. |
Tacolyn™ 1070 Resin Dispersion | Tackifier Dispersion | Tacolyn™ 1070 resin dispersion is an aqueous, 55% solids, solvent-free, anionic hydrocarbon dispersion. It is recommended as a tackifier for acrylic latex polymers used in label, tape, and construction adhesive applications. As a modifier for these latexes, Tacolyn™ 1070 enhances specific adhesion to polyolefin substrates and recycled corrugated board. It promotes cohesive strength and offers good moisture resistance when used in pressure sensitive adhesives. It may be used in clear film label applications due to its good color retention and oxidation resistance.
|
Tacolyn™ 3100 Resin Ester Dispersion | Tackifier Dispersion | Tacolyn™ 3100 rosin ester dispersion is an aqueous, 55% solids, solvent-free, rosin ester dispersion prepared from the pentaerythritol ester of hydrogenated rosin. It is recommended as a tackifier for acrylic latex polymers used in label, tape, and construction applications including clear film label applications. Tacolyn™ 3100 is highly hydrogenated and promotes high temperature performance in waterborne PSAs.
|
Tacolyn™ 3570 Resin Dispersion | Tackifier Dispersion | Tacolyn™ 3570 Resin Dispersion is an anionic, aqueous, solvent-free, and APE (alkylphenol ethoxylate) free dispersion of a stabilized rosin ester. It is designed for use in pressure sensitive adhesives based on acrylic polymer emulsions or carboxylated SBR polymer emulsions, where it greatly enhances the tack and peel to polyethylene and carton board
|
Tacolyn™ 5002 Resin Dispersion | Tackifier Dispersion | Tacolyn™ 5002 resin dispersion is an aqueous, 55% solids, solvent-free, anionic hydrocarbon resin dispersion. It is recommended as a tackifier for natural rubber and styrene butadiene rubber latex polymers used in label, tape, construction, and contact adhesive applications. As a modifier for pressure sensitive label and tape adhesives, Tacolyn™ 5002 provides a good balance of peel and shear and enhances specific adhesion to polyolefin substrates and recycled corrugated board. Tacolyn™ 5002 is recommended for water-based contact adhesives where fast break properties are required as in foam to foam bonding applications.
|
Tacolyn™ 5003 Resin Dispersion | Tackifier Dispersion | Tacolyn™ 5003 resin dispersion is an aqueous, 45% solids, solvent-free, anionic hydrocarbon resin dispersion. It is recommended as a single tackifier for anionic polychloroprene latex polymers used in contact adhesive applications. When used as a modifier for contact adhesives, Tacolyn™ 5003 imparts outstanding high temperature performance, excellent contactability and good moisture resistance without the use of a second reinforcing tackifier.
|
Tacolyn™ 5070 Resin Dispersion | Tackifier Dispersion | Tacolyn™ 5070 resin dispersion is an aqueous, 50% solids, solvent-free anionic aliphatic hydrocarbon dispersion prepared from a low molecular weight, aliphatic C5 hydrocarbon resin. It is recommended as a tackifier for isoprene rubber and natural rubber latex polymers used in tape applications. Tacolyn™ 5070 is ideal for low peel applications because it imparts peel strength in small increments relative to resination level. It exhibits good storage and mechanical stability and outstanding stability to acids. Tacolyn™ 5070 is also highly resistant to acids and alkalies.
|
Contact Us
We welcome your questions and comments. To make a general enquiry or to find out more about a specific Synthomer product, please get in touch.
Contact us