Binders to meet all your graphic paper application needs
Key features:
- Excellent binder stability and optimal coater runnability
- Improved production efficiency
- High strength and excellent printability
- Wide product portfolio for all your paper coating application needs
- Meet the highest environmental standards
- Customised products to meet specific requirements.
Synthomer is a leading manufacturer of synthetic binders for graphic paper coating. Applications for our binders include fine paper (sheet and web offset) and mechanical paper (offset and rotogravure).
Paper coating creates a smooth surface with well defined porosity and glossy to matte finishes. This is essential for perfectly reproducing images during printing. Synthomer binders also ensure the mechanical strength required during the printing process, and deliver the polymer properties needed to achieve perfect print with high definition and brilliance.
With decades of experience and an extensive polymer portfolio, we can customise coating and paper properties to fit the precise technical requirements of your paper grades. Our experts support you with in-depth knowledge of the development and application of styrene butadiene (XSBR) and acrylic (SA) binder technologies for the paper and packaging industry.
| Tradename | Chemistry | Description |
|---|---|---|
| Picco™ A-10 Hydrocarbon Resin | Aromatic Hydrocarbon Resin | Picco™ A-10 hydrocarbon resin is a low molecular weight, resinous plasticizer derived largely from aromatic petroleum feedstock. It is characterized by its chemical inertness, excellent resistance to salts, acids, alkalis, water and brines, and its solubility in a wide variety of hydrocarbon solvents. Picco A-10 is indicated for use as a binder in lithographic (cold set) inks and as plasticizer, softener and tackifier for other resins and elastomers used in rubber compounding and various adhesive systems.
|
| Picco™ A-100 Hydrocarbon Resin | Aromatic Hydrocarbon Resin | Picco™ A-100 hydrocarbon resin, with its low softening point and molecular weight has a high level of compatibility in various polymers. It has excellent resistance to acids, alkalis and moisture, good resistance to oxygen, and is extremely water repellent. In addition, it provides excellent solvent release, tack and tack retention, excellent pigment wetting, and can be used with both reinforcing and non-reinforcing fillers. Picco A-100 is a viscous fluid at rubber-milling temperatures, and aids compounding by reducing viscosity and by adding tack while on the rolls. These advantages, combined with improvement in mold flow during cure, are obtained without lowering the cured hardness of the finished product. In styrenic block copolymer-based adhesives Picco A-100 preferentially associates with the styrenic end blocks, producing higher room-temperature cohesion without affecting tack and adhesion properties. Picco A-100 is also utilized frequently in EVA-based woodworking adhesives.
|
| Picco™ A-120 Hydrocarbon Resin | Aromatic Hydrocarbon Resin | Picco™ A-120 hydrocarbon resin is a low molecular weight, amber colored thermoplastic resin produced from petroleum-derived monomers that is polymerized under conditions that control its softening point within a narrow range. Being non-polar, it is characterized by its excellent resistance to acids, alkalis and moisture and is extremely water repellent. It shows good color stability and, when formulated with elastomers, a good balance of flex, tear, tack and adhesion properties. In addition, Picco A-120 has excellent solvent release, tack and tack retention, wide solubility and compatibility, good resistance to oxygen and UV light, provides excellent pigment wetting and can be used with both reinforcing and non-reinforcing fillers. Picco A-120 is a viscous fluid at rubber-milling temperatures, and aids compounding by reducing viscosity and by adding tack while on the rolls. These advantages, combined with improvement in mold flow during cure, are obtained without lowering the cured hardness of the finished product. This resin is particularly indicated as a processing and reinforcing agent in rubber compounds and as a binder in protective coatings. In styrenic block copolymer-based adhesives Picco A-120 preferentially associates with the styrenic end blocks, producing higher cohesion at temperatures up to 70°C without affecting tack and adhesion properties. Picco A-120 is also utilized frequently in EVA-based woodworking adhesives.
|
| Picco™ A-140 Hydrocarbon Resin | Aromatic Hydrocarbon Resin | Picco™ A-140 Hydrocarbon Resin is a low molecular weight, amber colored thermoplastic resin produced from petroleum-derived monomers that is polymerized under conditions that control its softening point within a narrow range. It is characterized by its excellent resistance to acids, alkalis and moisture. It shows good color stability and, when formulated with elastomers, a good balance of flex, tear, tack and adhesion properties. In styrenic block copolymer-based adhesives Picco A-140 preferentially associates with the styrenic end blocks, producing higher cohesion at temperatures up to 70°C without affecting tack and adhesion properties. Picco A-140 is particularly indicated as a processing and reinforcing agent in rubber compounds and as binder in protective coatings. It is also utilized in EVA-based woodworking adhesives.
|
| Picco™ AR-100 Hydrocarbon Resin | Aromatic Hydrocarbon Resin | Picco™ AR-100 Hydrocarbon Resin is a low molecular weight, modified aromatic hydrocarbon resin. This resin has good solubility in aliphatic and aromatic hydrocarbons and is compatible with a wide variety of thermoplastic and elastomeric polymers. It is utilized frequently in EVA-based woodworking adhesives and finds widespread use in pressure sensitive adhesives, particularly in systems containing natural rubber or styrene-butadiene rubber (SBR). It offers an excellent balance of tack, adhesion and cohesive properties to pressure sensitive systems. In styrenic block copolymer-based adhesives Picco AR-100 preferentially associates with the styrenic end blocks, producing higher room-temperature cohesion without affecting tack and adhesion properties.
|
| Picco™ AR-85 Hydrocarbon Resin | Aromatic Hydrocarbon Resin | Picco™ AR-85 hydrocarbon resin is a low molecular weight, modified aromatic hydrocarbon resin. This resin has good solubility in aliphatic and aromatic hydrocarbons and is compatible with a wide variety of thermoplastic and elastomeric polymers. Picco AR-85 is utilized in EVA-based woodworking adhesives. In addition, it is widely used in pressure sensitive adhesives, particularly in systems containing natural rubber or SBR. It offers an excellent balance of tack, adhesion and cohesive properties. In styrenic block copolymer-based adhesives Picco AR-85 preferentially associates the styrenic end blocks, producing lower melt viscosity while maintaining room-temperature cohesion without affecting tack and adhesion properties.
|
| Regalite™ C6100 Hydrocarbon Resin | Hydrogenated Hydrocarbon Resin | Regalite™ C6100 hydrocarbon resin is a very light color, partially hydrogenated, modified aliphatic resin designed as an excellent tackifier for the midblock of thermoplastic block copolymers, including styrene-isoprene-styrene (SIS), [low, medium, and high styrene content] styrene ethylene butylene styrene (SEBS) and styrene-butadiene-styrene (SBS). It also shows excellent compatibility with ethylene vinyl acetate (EVA). Regalite™ C6100 is recommended for use in a variety of hot melt adhesives, including nonwoven assembly, packaging, bookbinding, glue sticks, and pressure-sensitive tape and label adhesives. |
| Regalite™ C6100L Hydrocarbon Resin | NBR-Dry | Regalite™ C6100L Hydrocarbon Resin is a hydrogenated water-white hydrocarbon resin developed derived from petrochemical feedstocks. This resin is especially designed as a component of a multipart tackifier system in hot melt and solvent based pressure sensitive adhesives based on SIS, SBS and SEBS thermoplastic block copolymers, providing superior tack, adhesion and cohesive strength characteristics.
|
| Regalite™ R1010 Hydrocarbon Resin | Hydrogenated Hydrocarbon Resin | Regalite™ R1010 hydrocarbon resin is a liquid hydrogenated, water-white, low molecular weight resin derived from petrochemical feedstocks. This resin is especially designed as a component of a multipart tackifier system in hot melt and solvent based pressure sensitive adhesives based on SIS and SBS thermoplastic block copolymers, providing superior tack, adhesion and cohesive strength characteristics.
|
| Regalite™ R1125 Hydrocarbon Resin | Hydrogenated Hydrocarbon Resin | Regalite™ R1125 hydrocarbon resin is a low molecular weight fully hydrogenated water-white inert thermoplastic resin derived from petrochemical feedstocks. This resin is particularly useful as tackifier for hot melt systems based on EVA copolymers and SIS block copolymers. |
| Regalite™ R7100 Hydrocarbon Resin | Hydrogenated Hydrocarbon Resin | Regalite™ R7100 hydrocarbon resin is a partially hydrogenated water-white inert thermoplastic resin derived from petrochemical feedstocks. This resin is especially designed as a tackifier in hot melt adhesives based on SBS block copolymers, providing excellent color retention upon aging. |
| Regalite™ S1100 Hydrocarbon Resin | Hydrogenated Hydrocarbon Resin | Regalite™ S1100 hydrocarbon resin is a low molecular weight fully hydrogenated water-white thermoplastic resin derived from petrochemical feedstock. This resin is especially designed as tackifier in hot melt adhesives requiring good color retention upon ageing. |
| Regalite™ S5090 Hydrocarbon Resin | Hydrogenated Hydrocarbon Resin | Regalite™ S5090 hydrocarbon resin is an unique partially hydrogenated water-white inert thermoplastic resin derived from petrochemical feedstock. |
| Regalite™ S5100 Hydrocarbon Resin | Hydrogenated Hydrocarbon Resin | Regalite™ S5100 hydrocarbon resin is a unique partially hydrogenated water-white inert thermoplastic resin derived from petrochemical feedstock. This resin is especially designed as a tackifier in hot melt adhesives based on SIS and SBS block copolymers, where it provides superior room temperature cohesion combined with very low adhesive viscosity.
|
| Regalite™ S7125 Hydrocarbon Resin | Hydrogenated Hydrocarbon Resin | Regalite™ S7125 hydrocarbon resin is a partially hydrogenated water-white inert thermoplastic resin derived from petrochemical feedstocks. This resin is especially designed as a tackifier in hot melt adhesives based on EVA, SIS and SBS copolymers, providing low odor and good color retention upon ageing. |
Contact Us
We welcome your questions and comments. To make a general enquiry or to find out more about a specific Synthomer product, please get in touch.
Contact us