Safer rubber on the road
For tyre manufacturers, Synthomer IMPERA™ performance resins help enhance wet traction, responsive handling and rolling resistance, without compromising other key performance characteristics or processing. Adding even a small amount of IMPERA™ fine-tunes performance, which potentially avoids tyre manufacturers having to make significant formulation changes or even redesign their tyres.
For tyre manufacturers and formulators, balancing performance and safety is a constant challenge. Both are essential, but regulations, tyre labelling requirements, and third-party ratings place heavy emphasis on safety. Our innovations help tyres perform with better responsiveness, braking and grip so that manufacturers can ensure their tyres deliver on all levels without significant trade-offs.
Tradename | Chemistry | Description |
---|---|---|
Abalyn™ D-E Methyl Ester of Rosin | Rosin Resin | Abalyn™ D-E methyl ester of gum rosin, is an amber-colored, near-neutral, tacky, viscous liquid. It is resinous in nature with clarity and high refractive index, low vapor pressure, high boiling point, and good thermal stability. It has excellent surface-wetting properties. These physical properties, plus its wide compatibility, make it useful in a variety of applications, including lacquers, inks, paper coatings, varnishes, adhesives, sealing compounds, plastics and wood preservatives. To assure minimum odor of products in which it is used, it is given a special steam sparging treatment.
|
Abitol™ E Hydroabietyl Alcohol | Rosin Resin | Abitol™ E resin hydroabietyl alcohol is a colorless, tacky, balsamic resin. Its tackiness and extremely pale color, combined with its solubility in common organic solvents and compatibility with resins, film-formers, and oils, have led to its use as a resinous plasticizer and/or tackifier in plastics, lacquers, inks and adhesives. Chemically, Abitol E resin is a high molecular weight, primary, monohydric alcohol derived from rosin acids that have been hydrogenated to reduce unsaturation. Abitol E resin undergoes the general types of chemical reaction common to most primary alcohols.
|
Eastotac™ H-100E Resin | SB-Dry | Eastotac™ H-100E is a hydrogenated hydrocarbon resin, having a softening point of 100°C and a Gardner color of 5 measured at 50% solids.
|
Eastotac™ H-100L Resin | SB-Dry | Eastotac™ H-100L is a hydrogenated hydrocarbon resin, having a softening point of 100°C and a molten Gardner color of 2. Eastotac H-100L has excellent compatibility with APAO (amorphous poly-alpha-olefins), metallocene-catalyzed polyolefins, as well as the midblock of SIS (styrene-isoprene-styrene), and SEBS (styrene-ethylene/butylene-styrene) block copolymers. Eastotac H-100L resin is used in numerous hygiene, packaging & assembly adhesive applications and sealant applications.
|
Eastotac™ H-100R Resin | SB-Dry | Eastotac™ H-100R is a hydrogenated hydrocarbon resin, having a softening point of 100°C and a molten Gardner color of 4. Eastotac H-100R has excellent compatibility with APAO (amorphous poly-alpha-olefins), metallocene-catalyzed polyolefins, as well as the midblock of SIS (styrene-isoprene-styrene), and SEBS (styrene-ethylene/butylene-styrene) block copolymers. Eastotac H-100R resin is used in numerous hygiene, packaging and assembly adhesive applications, and sealant applications.
|
Eastotac™ H-100W Resin | SB-Dry | Eastotac™ H-100W is a hydrogenated hydrocarbon resin, having a softening point of 100°C and a molten Gardner color of <1. In applications where low color is required, the W-grade resins are suggested. Eastotac H-100W has excellent compatibility with APAO (amorphous poly-alpha-olefins), metallocene-catalyzed polyolefins, as well as the midblock of SIS (styrene-isoprene-styrene), and SEBS (styrene-ethylene/butylene-styrene) block copolymers. Eastotac H-100W resin is used in numerous hygiene, packaging and assembly adhesive applications, sealant applications, and in epilatorie waxes.
|
Eastotac™ H-115E Resin | SB-Dry | Eastotac™ H-115E is a hydrogenated hydrocarbon resin, having a softening point of 115°C and a Gardner color of 5 measured at 50% solids.
|
Eastotac™ H-115L Resin | SB-Dry | Eastotac™ H-115L is a hydrogenated hydrocarbon resin, having a softening point of 115°C and a molten Gardner color of 2. Eastotac H-115L has excellent compatibility with APAO (amorphous poly-alpha-olefins), metallocene-catalyzed polyolefins, as well as the midblock of SIS (styrene-isoprene-styrene), and SEBS (styrene-ethylene/butylene-styrene) block copolymers. Eastotac H-115L resin is used in numerous adhesive and sealant applications.
|
Eastotac™ H-115R Resin | SB-Dry | Eastotac™ H-115R is a hydrogenated hydrocarbon resin, having a softening point of 115°C and a molten Gardner color of 5. Eastotac H-115R has excellent compatibility with APAO (amorphous poly-alpha-olefins), metallocene-catalyzed polyolefins, as well as the midblock of SIS (styrene-isoprene-styrene), and SEBS (styrene-ethylene/butylene-styrene) block copolymers. Eastotac H-115R resin is used in numerous adhesive and sealant applications.
|
Eastotac™ H-130E Resin | SB-Dry | Eastotac™ H-130E is a hydrogenated hydrocarbon resin, having a softening point of 130°C and a molten Gardner color of 8.
|
Eastotac™ H-130W Resin | SB-Dry | Eastotac™ H-130W is a hydrogenated hydrocarbon resin, having a softening point of 130°C and a molten Gardner color of <1. In applications where low color is required, the W-grade resins are suggested. Eastotac H-130W has excellent compatibility with APAO (amorphous poly-alpha-olefins), metallocene-catalyzed polyolefins, as well as the midblock of SIS (styrene-isoprene-styrene), and SEBS (styrene-ethylene/butylene-styrene) block copolymers, and is frequently used in hygiene adhesives, packaging and assembly adhesives, and sealants.
|
Eastotac™ H-142R Resin | SB-Dry | Eastotac™ H-142R is a hydrogenated hydrocarbon resin, having a softening point of 142°C and a molten Gardner color of 5. Eastotac H-142R has excellent compatibility with SEBS (styrene-ethylene/butylene-styrene) block copolymers and butyl rubbers, as well as polyolefins, and is frequently used in adhesives and sealants.
|
Eastotac™ H-142W Resin | SB-Dry | Eastotac™ H-142W is a hydrogenated hydrocarbon resin, having a softening point of 142°C and a molten Gardner color of <1. Eastotac™ H-142W has excellent compatibility with SEBS (styrene-ethylene/butylene-styrene) block copolymers and butyl rubbers, as well as polyolefins, and is frequently used in adhesives, sealants, and in polymer and film modification.
|
Metalyn™ 200 Methyl Ester of Rosin | Rosin Resin | Metalyn™ 200 methyl ester of gum rosin, a resinous plasticizer derived from rosin, is an amber-colored, tacky, viscous liquid. These physical properties, together with its wide compatibility, make it useful in a variety of applications, including lacquers, inks, adhesives, plastics, paper coatings and varnishes.
|
Pentalyn™ 670-M Resin | Rosin Resin | Pentalyn™ 670-M resin is a partially esterized fumaric adduct of rosin, designed mainly for application in rotogravure inks, with modified RS nitrocellulose.
|
Pentalyn™ H-E Ester of Hydrogenated Rosin | Rosin Resin | Pentalyn™ H-E ester of hydrogenated gum rosin is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesive formulations, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack-imparting properties than ordinary rosin ester resins.
|
Permalyn™ 5095 Synthetic Resin | Rosin Resin | Permalyn™ 5095 synthetic resin, a pale, thermoplastic resin, is the glycerol ester of gum rosin. It is produced by a special process that yields a low-odor, low-acid-number resin that is suggested for use as a modifier for film-formers, elastomers, and waxes in various adhesives and protective coatings where pale color and minimal odor are required.
|
Permalyn™ 5110 Synthetic Resin | Rosin Resin | Permalyn™ 5110 synthetic resin is a pentaerythritol ester of gum rosin. It has been designed for adhesive applications that require light initial color and good color stability. Permalyn 5110 is used as a resin modifier in elastomers, waxes, film-formers, and various adhesive and protective coating applications.
|
Permalyn™ 5110-C Synthetic Resin | Rosin Resin | Permalyn™ 5110-C synthetic resin is the pentaerythritol ester of gum rosin. It is produced by a special process that yields a low odor, low acid number resin. It is suggested for use as a modifier for film-formers, elastomers, and waxes in various adhesives and protective coatings where pale color and minimal odor are required.
|
Permalyn™ 6110 Synthetic Resin | Rosin Resin | Permalyn™ 6110 synthetic resin, a very pale, hard, thermoplastic resin, is a pentaerythritol ester of gum rosin. It is produced by a special process that yields a low-odor, light-colored, very stable product. Permalyn 6110 is used as a resin modifier in elastomers, waxes, film-formers, and various adhesive and protective coating applications.
|
Permalyn™ 6110-M Synthetic Resin | Rosin Resin | Permalyn™ 6110-M is a high softening point, light color thermoplastic resin; it is a pentaerythritol ester of gum rosin, specially developed to be used in the Adhesives Industry. The special manufacturing process of this resin allows getting a product, which is highly resistant to oxidation, color retention and has minimum odor.
|
Permalyn™ 8120 Rosin Ester | Rosin Resin | Permalyn™ 8120 is a pentaerythritol ester of gum rosin which has been chemically modified to have a ring and ball softening point near 120°C. Permalyn™ 8120 has lower color, better color stability higher heat stability, and higher softening point than typical pentaerythritol rosin esters. It is potentially useful in hot melt adhesive and ink applications where a high softening point is desirable and especially in packaging hot melt adhesives where color and viscosity stability at application temperatures are critical.
|
Poly-Pale™ Partially Dimerized Rosin | Rosin Resin | Poly-Pale™ resin is a pale, partially polymerized (dimerized) gum rosin. Compared with pale grades of regular wood, gum, or tall oil rosins, it has a higher softening point, higher viscosity (molten and in solution), much greater resistance to oxidation, and complete freedom from crystallizing when in solid form or in solution. Its many uses include the preparation of varnishes, driers, synthetic resins, ink vehicles, floor tile, rubber compounds, solder fluxes, and various adhesives and protective coatings.
|
Regalite™ C6100 Hydrocarbon Resin | NBR-Dry | Regalite™ C6100 hydrocarbon resin is a very light color, partially hydrogenated, modified aliphatic resin designed as an excellent tackifier for the midblock of thermoplastic block copolymers, including styrene-isoprene-styrene (SIS), [low, medium, and high styrene content] styrene ethylene butylene styrene (SEBS) and styrene-butadiene-styrene (SBS). It also shows excellent compatibility with ethylene vinyl acetate (EVA). Regalite™ C6100 is recommended for use in a variety of hot melt adhesives, including nonwoven assembly, packaging, bookbinding, glue sticks, and pressure-sensitive tape and label adhesives. |
Regalite™ C6100L Hydrocarbon Resin | NBR-Dry | Regalite™ C6100L Hydrocarbon Resin is a hydrogenated water-white hydrocarbon resin developed derived from petrochemical feedstocks. This resin is especially designed as a component of a multipart tackifier system in hot melt and solvent based pressure sensitive adhesives based on SIS, SBS and SEBS thermoplastic block copolymers, providing superior tack, adhesion and cohesive strength characteristics.
|
Regalite™ C8010 Hydrocarbon Resin | NBR-Dry | Regalite™ C8010 Hydrocarbon Resin is a new liquid hydrogenated water-white resin derived from petrochemical feedstocks. This resin is especially designed as a component of a multipart tackifier system in hot melt and solvent-based pressure sensitive adhesives based on SIS, SBS and SEBS thermoplastic block copolymers. It provides superior tack, adhesion, and cohesive strength characteristics. Regalite™ C8010 is only available in the Asia Pacific region.
|
Regalite™ R1010 Hydrocarbon Resin | NBR-Dry | Regalite™ R1010 hydrocarbon resin is a liquid hydrogenated, water-white, low molecular weight resin derived from petrochemical feedstocks. This resin is especially designed as a component of a multipart tackifier system in hot melt and solvent based pressure sensitive adhesives based on SIS and SBS thermoplastic block copolymers, providing superior tack, adhesion and cohesive strength characteristics.
|
Regalite™ R1090 Hydrocarbon Resin | NBR-Dry | Regalite™ R1090 hydrocarbon Rrsin is a low molecular weight fully hydrogenated, water-white, inert, thermoplastic resin derived from petrochemical feedstocks. This resin is especially designed as tackifier in hot melt adhesives based on EVA copolymers and SIS block copolymers requiring excellent color retention upon aging.
|
Regalite™ R1100 Hydrocarbon Resin | NBR-Dry | Regalite™ R1100 hydrocarbon resin is a low molecular weight fully hydrogenated, water-white, inert, thermoplastic resin derived from petrochemical feedstocks. This resin is especially designed as tackifier in hot-melt adhesives requiring excellent color retention upon aging.
|
Regalite™ R1125 Hydrocarbon Resin | NBR-Dry | Regalite™ R1125 hydrocarbon resin is a low molecular weight fully hydrogenated water-white inert thermoplastic resin derived from petrochemical feedstocks. This resin is particularly useful as tackifier for hot melt systems based on EVA copolymers and SIS block copolymers. |
Regalite™ R7100 Hydrocarbon Resin | NBR-Dry | Regalite™ R7100 hydrocarbon resin is a partially hydrogenated water-white inert thermoplastic resin derived from petrochemical feedstocks. This resin is especially designed as a tackifier in hot melt adhesives based on SBS block copolymers, providing excellent color retention upon aging. |
Regalite™ S1100 Hydrocarbon Resin | NBR-Dry | Regalite™ S1100 hydrocarbon resin is a low molecular weight fully hydrogenated water-white thermoplastic resin derived from petrochemical feedstock. This resin is especially designed as tackifier in hot melt adhesives requiring good color retention upon ageing. |
Regalite™ S5090 Hydrocarbon Resin | NBR-Dry | Regalite™ S5090 hydrocarbon resin is an unique partially hydrogenated water-white inert thermoplastic resin derived from petrochemical feedstock. |
Regalite™ S5100 Hydrocarbon Resin | NBR-Dry | Regalite™ S5100 hydrocarbon resin is a unique partially hydrogenated water-white inert thermoplastic resin derived from petrochemical feedstock. This resin is especially designed as a tackifier in hot melt adhesives based on SIS and SBS block copolymers, where it provides superior room temperature cohesion combined with very low adhesive viscosity.
|
Regalite™ S7125 Hydrocarbon Resin | NBR-Dry | Regalite™ S7125 hydrocarbon resin is a partially hydrogenated water-white inert thermoplastic resin derived from petrochemical feedstocks. This resin is especially designed as a tackifier in hot melt adhesives based on EVA, SIS and SBS copolymers, providing low odor and good color retention upon ageing. |
Staybelite™ Ester 10-E Ester of Hydrogenated Rosin | Rosin Resin | Staybelite™ ester 10-E ester of hydrogenated gum rosin is a pale, thermoplastic resin with the excellent resistance to oxidation and discoloration characteristic of ester resins derived from hydrogenated rosin. It is a glycerol ester of rosin that has been stabilized by hydrogenation and has found wide acceptance as a tackifying resin for many adhesive applications, particularly pressure-sensitive, hot melt and emulsion types. In general, it is useful where there is need for a pale, nonoxidizing, color-stable resin.
|
Staybelite™ Ester 3-E Ester of Hydrogenated Rosin | Rosin Resin | Staybelite™ ester 3-E ester of hydrogenated gum rosin is a pale, viscous, balsamic liquid with the resistance to oxidation and discoloration characteristic of the Staybelite series of resins. The tacky, highly adhesive resin can be readily emulsified, and serves as plasticizer for a wide range of film formers. Staybelite ester 3-E is broadly compatible with many other components, and it has found wide acceptance in hot melt, pressure sensitive, and laminating adhesives. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, highly tacky liquid resin.
|
Staybelite™ Resin-E Partially Hydrogenated Rosin | Rosin Resin | Staybelite™ resin-E partially hydrogenated rosin is a pale, thermoplastic, acidic resin made by partially hydrogenating rosin. Because of this treatment, Staybelite resin-E partially hydrogenated rosin is highly resistant to oxidation and discolouration, and to changes in solubility characteristics when it is exposed to air and sunlight.
|
Contact Us
We welcome your questions and comments. To make a general enquiry or to find out more about a specific Synthomer product, please get in touch.
Contact us