DURAMUL |
DURAMUL 1533 |
PA |
Duramul 1533 acrylic emulsion produces a tough flexible film which is designed to cater for a wide range of architectural and industrial uses. It is suitable for use in coatings applied to timber, concrete and some plastics. Being a 100% acrylic copolymer, it resists yellowing and has excellent adhesion, surface hardness, gloss, water and alkali resistance, and exterior durability. |
DURAMUL |
DURAMUL 2600 |
PA |
Duramul™ 2600 acrylic emulsion produces a tough flexible film, which is specifically designed for use as a sealant in the manufacture of concrete roof tiles. Being a 100% acrylic copolymer, it resists yellowing and it has excellent adhesion, surface hardness, gloss, water and alkali resistance, and exterior durability. |
DURAMUL |
DURAMUL 652 |
PA |
DURAMUL 652 acrylic emulsion produces a tough flexible film, which is specifically designed for use as a sealant in the manufacture of concrete roof tiles. Being a 100% acrylic copolymer, it resists yellowing and it has excellent adhesion, surface hardness, gloss, water and alkali resistance, and exterior durability. |
DURAMUL |
DURAMUL 854 |
PA |
Duramul™ 854 has been developed as a medium hard acrylic for fishing net coatings and decorative paint applications onto masonry. With a little added co-solvent it will film form at room temperature. It forms hard, glossy and abrasion resistant films and has excellent resistance to weathering, water and alkalis. Can be blended with Duramul 853 if a softer film is required. |
DURAMUL |
DURAMUL 856 |
PA |
Duramul™ 856 self cross-linking acrylic emulsion has been specially developed for use in interior and exterior decorative coatings onto masonry. It provides premium quality adhesion, leveling and whitening when used as a binding medium for paints. Films are tough, adhesive and very flexible with excellent resistance to weathering, water and alkalis. In addition it offers excellent scrub resistance and is non-yellowing. |
DURAMUL |
DURAMUL 865 |
PA |
DURAMUL 865 has been specially designed for use on asbestos fibre cement and concrete roof tiles. It is a hard emulsion requiring higher level of co-solvent to achieve film properties at ambient temperature that can be used in concrete masonry coatings. Being a 100% acrylic copolymer it resists yellowing and has excellent weathering resistance, adhesion, surface hardness, gloss, water and alkali resistance. |
DURASOL |
DURASOL 2060 |
ACR |
DURASOL 2060 is a hydroxyl functional acrylic solution specifically designed for 2 pack system with aliphatic polyisocyanates to produce fast drying, good aluminum powder orientation and solid silver effect etc.properties. It is copolymerized by (meth) acrylate monomers and special monomers and used toluene and butyl acetate as solvents. |
DURASOL |
DURASOL 300 |
ACR |
Durasol™ 300 thermoplastic acrylic resin solution produces a hard, clear film of limited flexibility. It has excellent weathering resistance and excellent resistance to water, alkalis and ultraviolet light. The product is supplied as a 50% solution in toluene. |
DURASOL |
DURASOL 3270 |
ACR |
DURASOL 3270 is a hydroxyl functional acrylic solution in xylene specifically designed for 2 pack system with aliphatic polyisocyanates to produce fast drying, high hardness, high gloss and good weathering resistance properties. |
DURASOL |
DURASOL 362U |
ACR |
Durasol 362U thermoplastic acrylic resin solution produces a hard, clear film of limited flexibility. It has excellent resistance to weathering, water and alkalis, is non-yellowing and contains a UV absorber to maximize protection against UV light. It is ideally suited for use on pattern pave driveways and other flooring areas where strong sunlight is expected and where pale or pastel colours are to be used. It has quick drying and fast solvent release characteristics that allow faster return of flooring to usable service. Surfaces are especially resistant to tyre marking. The product is supplied in a high viscosity form as a 50% solution in xylene. |
DURASOL |
DURASOL 374 |
ACR |
Durasol™ 374 thermosetting acrylic resin solution produces a durable and very flexible clear film, specifically for use as a sealant in the manufacture of concrete roof tiles. It can also be used for non-roof tile applications, including general purpose concrete and masonry coating. It has excellent resistance to water, alkalis, weathering and UV light. The product is supplied as a 50% solution in mixed aromatic solvent. |
DURASOL |
DURASOL 4270 |
ACR |
DURASOL 4270 is a hydroxyl functional acrylic solution specifically designed for 2 pack system with aliphatic polyisocyanates to produce high gloss, high fullness, good brightness and gasoline resistance properties. It is copolymerized by (meth) acrylate monomers and special monomers and used PMA and xylene as solvents. This acrylate resin is modified by Cardura E-10. |
DURASOL |
DURASOL 836/24RX |
ACR |
DURASOL 836/24RX petrol resistant acrylic solution produces a hard, flexible, petrol resistant coating. It has excellent resistance to water, alkalis and commercial grades of petroleum and hydraulic fluids, making this resin ideal for use on areas such as concrete driveways in petrol stations. The product is supplied as a ready to use form at 24% solution in a blend of R100 and xylene. |
HITECH |
HITECH DURASOL HS 70703 BA |
ACR |
Hitech Durasol HS 70703 is unique 70% solids, medium hydroxyl content 2K acrylic which complement HS 70701 XL/SN or HS 74651 XL/BAc as a clearcoat for solid colour or metallic basecoat system.Excellent gloss retention and hardness is achieved via its high macromolecules polymer. |
PLEXTOL |
PLEXTOL D 2428 |
PA |
Plextol™ D 2428 is a self crosslinking acrylic emulsion which exhibits excellent wet scrub resistance and is designed specifically to be formulated as a surface sealer for interior and exterior substrates. Plextol D 2428 self crosslinking acrylic emulsion will not blush or water spot after 3 - 4 days curing at room temperature. |
PLEXTOL |
PLEXTOL R 4184 |
PA |
PLEXTOL R 4184 is an acrylic polymer dispersion based on APEO free surfactants and designed for use in premium highly durable exterior paint. It does not contain any added formaldehyde.PLEXTOL R 4184 is developed to have early water blister resistance. |
PLEXTOL |
PLEXTOL R 825 N |
PA |
PLEXTOL R 825 N is an acrylic copolymer dispersion. |
REVACRYL |
REVACRYL AE 4522 |
SA |
REVACRYL AE 4522 is a specially modified, aqueous dispersion of a styrene-acrylic ester copolymer intended to achieve good wet adhesion. The dispersion contains an anionic emulsifier system and is free from film forming aids, solvents and plasticizers. |
REVACRYL |
REVACRYL R 4332 |
SA |
REVACRYL R 4332 is a styrene-acrylic polymer dispersion based on APEO free surfactants. It does not contain any added formaldehyde or ammonia.Designed for a wide range of paint applications. Paints based on REVACRYL R 4332 exhibits outstanding water, alkali, efflorescence resistance and scrub resistance. |
REVERSOL |
REVERSOL 3108 |
ALK |
Reversol 3108 is a linoleic rich fatty acids
modified, medium oil pentaerythritol esterified
alkyd resin.
Reversol 3108 has high initial gloss and good
gloss retention. It also has fast air-drying property
and excellent yellowing resistance. |
REVERSOL |
REVERSOL 3115 |
ALK |
Reversol 3115 is a linoleic rich fatty acids
modified; medium oil pentaerythritol esterified
alkyd resin.
Reversol 3115 has high initial gloss and good
gloss retention. It also has fast air-drying
property and excellent yellowing resistance. |
REVERSOL |
REVERSOL 3471 |
ALK |
Reversol 3471 is a soya oil modified, medium oil
glycerol esterified alkyd resin.
Reversol 3471 has excellent durability and gloss
retention. It also has both fast baking and air-drying
properties, with fast dry through hardness and good
water resistance. |
REVERSOL |
REVERSOL 7901 |
ALK |
Reversol 7901 is an acrylic modified alkyd
based on dehydrated castor oil. It has excellent
hot slip and mar resistance, flow and leveling.
Reversol 7901 has good fabricating properties
and high alkali resistance. In addition, it has
good color retention and excellent durability. |
REVERSOL |
REVERSOL 7903 |
ALK |
Reversol 7903 is a dehydrated castor oil and
phenolic modified short oil alkyd resin. It has
good water, petrol and oil resistance. It has
excellent adhesion, corrosion, salt spray and
solvent resistance. |