Coatings - Others

Polymers for specialty coatings applications

Synthomer’s extensive polymer portfolio serves a wide range of high-performance applications, including in-mold coatings, roofing and roof tile, fibre cement coating, road marking and parking lot paint, automotive applications, liquid applied sound damping (lasd), swimming pools, agriculture and seed coatings, graphic arts, correction fluids and inks, primers, stabilising solution and more. 


Below are just some of the products available. Can’t find what you are looking for? A Synthomer polymer expert would be glad to discuss your specific situation to find a solution.


In-Mold Coatings (IMC)

Synthomer is an early founder and innovation IMC leader in high-performance primer and appearance coatings applied during the molding process of plastics, sheet molding compound (SMC), and composite components. Synthomer GENGLAZE material technologies are used for automotive, heavy truck, marine, and small part applications for nearly 40-years and latest innovations are being adopted in construction building materials, the hospitality supply industry, and every day commercial products.

Tradename Chemistry Description
GENGLAZE® EC-2447 OTH Heat-activated in-mold coating designed to enhance the surface of molded parts.GenGlaze EC-2447 in-mold coating surface finish is incorporated during compression molding instead of being applied separately. It is environmentally friendly as it does not contain solvents (100% solids), and reduces the number of surface finishing steps and manufacturing costs. 

Roofing, Roof Tile and Fibre Cement Coatings

Synthomer offers specialty polymers for multi-layer roofing membranes, cool-roof coatings, roof tile protection, fibre cement, and tilt-up coatings.

Tradename Chemistry Description
PLEXTOL™ D 507 PA Finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, solvents, plasticizers and ammonia.PLEXTOL D 507 is a pure acrylic recommended for industrial concrete-roof tile coatings. It shows excellent exterior durability and very high resistance against water-whitening and efflorescence.
PLEXTOL™ D 977 PA Plextol  D 977 is a water-based dispersion of acrylic copolymer designed for Elastomeric coatings, roof and walls.It provides a good balance between mechanical properties and dirt pick-up resistance thanks to the adjusted internal plastification and UV surface curing system.
PLEXTOL™ M 625 PA Finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. The dispersion contains an anionic emulsifier system, and is free from APEO, coalescing agents, solvents, and plasticizers.PLEXTOL M 625 is a hard pure acrylic with excellent UV-resistance and exterior durability. It is highly recommended for industrial concrete roof-tile and fibre-cement coatings. It shows an outstanding efflorescence and water-whitening resistance.
PLEXTOL™ R 100 PA Plextol R 100 is a surfactant stabilised modified - acrylic copolymer dispersion that forms a flexible, tough film of high water resistance.Plextol R 100 is recommended for exterior and interior paints.
PLEXTOL™ R 5512 PA Plextol R 5512 is a water-based pure acrylic copolymer dispersion mainly recommended for Crack bridging wall paints and highly flexible roof coatings.Plextol R 5512 provides high flexibility and expceptional water, alkali and dirt pick-up resistance.It contributes a good balance between mechanical properties and dirt pick-up resistance thanks to the adjusted internal plastification and UV surface curing system.
PLIODISP™ 7600 SA Pliodisp 7600 is a water-based styrene acrylic copolymer developed for Elastomeric Wall and Roof coatings.It is also recommended for Texture coatings and Silicate paints.Pliodisp 7600 provides high elongation at break, low water uptake and effective water impermeability.
PLIODISP™ 7602 SA Pliodisp 7602 is a plasticizer-free water-based dispersion based on acrylic acid esters and styrene.Pliodisp 7602 is recommended for the manufacturing of Elastomeric Wall and Roof coatings. It is also suitable to produce Resin-bound plasters,Textured coatings and Silicate paints and Plasters.
PLIOTEC® EL25 PA Pliotec EL25 acrylic elastomeric latex provides excellent tensile/elongation properties, superior dirt pick-up resistance, great adhesion to concrete und UV resistance.Water-based elastomeric resin for vertical masonry coatings, roofing and tilt up coatings.
REVACRYL™ AE 3020 SA REVACRYL AE 3020 is an aqueous dispersion of an acrylic ester-styrene copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, APEO, solvents and plasticizers.REVACRYL AE 3020 is a low MFFT silane-modified styrene-acrylic with excellent wet adhesion and water-resistance. It shows high flexibility and is recommended for roof-coatings. 
REVACRYL™ P 7600 SA Revacryl P 7600 is a water-based styrene acrylic copolymer developed for Elastomeric Wall and Roof coatings.It is also recommended for Texture coatings and Silicate paints.Revacryl P 7600 provides high elongation at break, low water uptake and effective water impermeability.
REVACRYL™ P 7602 SA Revacryl P 7602 is a plasticizer-free water-based dispersion based on acrylic acid esters and styrene.Revacryl P 7602 is recommended for the manufacturing of Elastomeric Wall and Roof coatings. It is also suitable to produce Resin-bound plasters, Textured coatings and Silicate paints and Plasters.

Road marking traffic and parking lot paint

Synthomer has water-based acrylics, alkyds, and solvent-borne thermoplastic polymers specifically designed for traffic road markings, parking lots, and pedestrian crosswalks.

Tradename Chemistry Description
PLEXTOL™ RM 1017 SA PLEXTOL RM 1017 is a surfactant stabilised modified - acrylic copolymer dispersion. The dispersion is free from film forming aids, APEO, solvents and plasticizers.PLEXTOL RM 1017 forms a flexible, tough film of high water resistance. It is recommended for roadmarking paints.
PLIOCRYL™ 4526 OTH Pliocryl 4526 is an orthophthalic unsaturated polyester solvent-based resin.Mainly recommended for two-component traffic marking paints, especially pedestrian crossings, parking lots, streets, auxiliary markings.Pliocryl 4526 provides a good balance of flexibility and hardness after curing, as well as weather and abrasion resistances.
PLIOCRYL™ 4600 ACR Pliocryl 4600 is a thermoplastic solvent-based styrene-acrylic copolymer.It provides extremely fast drying, high hardness and good water resistance properties.Mainly recommended for traffic marking and floor paints.
PLIOCRYL™ 4660 ACR Pliocryl 4660 is a thermoplastic solvent-based styrene-acrylic copolymer.It provides fast drying, good mechanical properties and good water resistance.Mainly recommended for swimming pools paints as well as floor and traffic marking paints.
REVACRYL™ RM 4550 SA REVACRYL RM 4550 is a specially modified, aqueous dispersion of a styrene-acrylic ester copolymer. The dispersion is free from film forming aids, APEO, solvents and plasticizers. REVACRYL RM 4550 shows excellent adhesion on mineral substrates and water-resistance. It is highly recommended for road marking paints.

Swimming Pools

Synthomer produces polymer resins specifically designed for swimming pool paints and as a chlorinated rubber replacement.

Tradename Chemistry Description
PLIOTEC® 7104E SA Pliotec 7104E is high Tg styrene acrylic latex that provides excellent adhesion to concrete and resistance to chemicals. It allows formulation of floor coatings that exhibits superior resistance to abrasion and hot tire pick-up.Pliotec 7104E can be used to formulate garage floor coatings, masonry primers and waterproofing sealers.

Protective Cheese Coatings

Synthomer has a specialty coatings portfolio of water-borne colloid-stabilized protective food-grade polymers. Suitable for various applications especially medium to hard cheeses.

Tradename Chemistry Description
EMULTEX™ AD 230 VACO Emultex AD 230 is a water-based dispersion of vinyl acetate acrylic copolymer.Emultex AD 230 is properly recommended for coatings in contact with food and non-edible cheese rinds
EMULTEX™ P 6320 VACO Emultex P 6320 is a water-based copolymer dispersion based on vinyl acetate and maleic acid dibutyl ester, recommended for manufacturing non-edible cheese crust.Emultex P 6320 is suitable for the manufacturing of physiologically perfect coatings for food, especially for the manufacturing of coatings for hard cheese.The specific national legislation must be taken into account.
PLIODISP™ 6320 VACO Pliodisp 6320 is a water-based copolymer dispersion based on vinyl acetate and maleic acid dibutyl ester, recommended for manufacturing non-edible cheese crust.Pliodisp 6320 is suitable for the manufacturing of physiologically perfect coatings for food, especially for the manufacturing of coatings for hard cheese.The specific national legislation must be taken into account.

Seed & Agricultural Coatings

Synthomer has a specialized offering of agricultural seed coatings used to improve soil establishment, appearance, protection, and handling characteristics.

Tradename Chemistry Description
REVACRYL™ AG 203 SA REVACRYL AG 203 is an anionic stabilised aqueous dispersion of a styrene acrylic copolymer, suitable for agricultural applications.
REVACRYL™ AG 204 SA REVACRYL AG 204 is an ammonia free aqueous dispersion of a styrene-acrylic copolymer that is suitable for agricultural applications.

Contact a Synthomer technical polymer expert to discuss your formulation application needs.

home » Markets & Products » EMEA » Coatings » Others

6