Adhesive Applications

Synthomer’s extensive product portfolio caters for a wide range of other adhesives applications, including double sided tape, removable label, general packaging, high gloss lamination and aluminium lamination. If you can’t see your particular application listed, please contact our technical team to discuss how we can meet your specific needs.

Recommended Products

Tradename Chemistry Description
2-ETHYLHEXYL ACRYLATE Acrylic ester used for polymer manufacturing and as a raw material for syntheses. Molar Mass(g/mol): 184.28 Chemical formula: Stoichiometric formula: C11H20O2   CAS number: 103-11-7
ACRALEN™ SNX 7675 OTH ACRALEN SNX 7675 ia an aqueous emulsion of a self-crosslinking styrene-butadiene-acrylonitrile copolymer.
ACRYGEN™ 61192 PA Acrylic binder for nonwovens and textiles applications
ACRYLIC ACID - STABILIZED Non-saturated organic acid used for polymer manufacturing and as a raw material for syntheses.Molar Mass(g/mol): 72.06Chemical formula: Stoichiometric formula: C3H4OCAS number: 79-10-7
ACRYLIC ACID - STABILIZED - PURE Non-saturated organic acid used for polymer manufacturing and as a raw material for syntheses. Molar Mass(g/mol): 72.06 Chemical formula: Stoichiometric formula: C3H4O2   CAS number: 79-10-7
ALBESTER™ 2235 SatPE Carboxyl Terminated Polyester ResinPRELIMINARY VALUES. Delivery form: pale granules Albester™ 2235 is despatched from our Sant'Albano Stura - Italy production plant.
ALBESTER™ 5810 SatPE Carboxyl Terminated Polyester Resin. Delivery form: pale granules.  Albester™ 5810 is despatched from our Sant'Albano Stura - Italy production plant.
ALBESTER™ 5866 SatPE Carboxyl Terminated Polyester Resin.Delivery form: pale granules.  Albester™ 5866 is despatched from our Sant'Albano Stura - Italy production plant.
ALCOTEX™ 234 OTH Synthomer Ltd has developed Alcotex 234 for use in conjunction with Alcotex 225 as a buildup suppressant for vinyl chloride suspension polymerisation. It eliminates build-up on the reactor baffles and stirrer or areas of poor surface quality. Use of Alcotex 234 will lead to a substantially higher number of production runs before the reactor has to be opened and pressure cleaned. This results in higher productivity rates and a better quality PVC resin.
ALCOTEX™ 359B PVOH Alcotex 359B is a partially hydrolysed polyvinyl acetate. It is supplied as a solvent based solution of approximate ratio 90:10 methanol / methyl acetate. Alcotex 359B has a blocky distribution of hydroxyl groups   FEATURES Ready to formulate solution Absorbs water High film strength Solvent based Highly ink receptive Non-ionic copolymer   Alcotex 359B is manufactured on a dedicated polymerisation plant in Harlow, England.
ALCOTEX™ 432P PVOH Alcotex 432P is a 43% hydrolysed polyvinyl alcohol supplied as a low viscosity methanol based solution. It has been specifically developed by Synthomer Limited as a secondary suspending agent for vinyl chloride suspension polymerisation. It may be used in conjunction with conventional primary suspending agents. In optimised recipes, improvements can be obtained in the porosity/bulk density relationship. Better porosity facilitates both monomer removal and plasticiser uptake. These criteria are further enhanced when Alcotex 432P is used with the Alcotex range of primary suspending agents.
ALCOTEX™ 45 PVOH Alcotex 45 is a 45% hydrolysed polyvinyl alcohol supplied as a low viscosity solution in a water/isopropyl alcohol solution. It has been specifically developed as a secondary suspending agent for vinyl chloride suspension polymerisation. It may be used in conjunction with conventional primary suspending agents. In optimised recipes, improvements can be obtained in the porosity/bulk density relationship. Better porosity facilitates both monomer removal and plasticiser uptake. These criteria are further enhanced when Alcotex 45 is used with the Alcotex range of primary suspending agents. NMR measurements have shown that Alcotex 45 has a random distribution of acetate groups.
ALCOTEX™ 55-002H PVOH Alcotex 55-002H is a colloidal dispersion of polyvinyl alcohol. It has been specifically developed by Synthomer Ltd as a secondary suspending agent for vinyl chloride suspension polymerisation. It may be used in conjunction with conventional primary suspending agents. In optimised recipes, improvements can be obtained in the porosity/bulk density relationship. Better porosity facilitates both monomer removal and plasticiser uptake. These criteria are further enhanced when Alcotex 55-002H is used with the Alcotex range of primary suspending agents. NMR measurements have shown that Alcotex 55- 002H has a random distribution of acetate groups.
ALCOTEX™ 552P PVOH Alcotex 552P is an aqueous solution of a 55% hydrolysed polyvinyl alcohol. It has been developed by Synthomer Ltd as a porosity enhancement agent for PVC suspension polymerisation. It has a low residual methanol content. Alcotex 552P can be used in conjunction with conventional primary suspending agents. In optimised recipes, improvements can be obtained in the porosity/bulk density relationship. Better porosity facilitates both monomer removal and plasticiser uptake. These criteria are further enhanced when Alcotex 552P is used with the Alcotex range of primary suspending agents. NMR measurements have shown that Alcotex 552P has a random distribution of acetate groups.  
ALCOTEX™ 7206 PVOH Alcotex 7206 is a 72.5% hydrolysed, low/ medium molecular weight polyvinyl alcohol which has been specially developed for use as a primary suspending agent for vinyl chloride suspension polymerisation. NMR measurements have shown that Alcotex 7206 has a blocky distribution of acetate groups.
ALCOTEX™ 80 PVOH Alcotex 80 is an 80% hydrolysed high molecular weight polyvinyl alcohol which has been specially developed for use as a primary suspending agent for vinyl chloride suspension polymerisation.
ALCOTEX™ 864 PVOH Alcotex 864 is a polyvinyl alcohol, internally plasticized and supplied in a water solution. Alcotex 864 has a medium high hydrolysis level and a low molecular weight.   FEATURES Aqueous solution. Forms very flexible films when dry. Dry films can be easily dissolved. Very receptive to ink jet printing inks. The dry film can be insolublised by crosslinking. Non-ionic copolymer.   Alcotex 864 is manufactured on a dedicated polymerisation plant in Harlow, England.
ALCOTEX™ 8847 PVOH Alcotex 8847 is an 88% hydrolysed polyvinyl alcohol for use in speciality applications such as vinyl acetate containing copolymer resins as well as in standard grades. Alcotex 8847 is a high molecular weight polyvinyl alcohol giving a high colloidal stability in PVC suspension polymerisation.
ALCOTEX™ 975 PVOH Alcotex 975 is an internally plasticized polyvinyl alcohol supplied in a solvent system of water and propan-1-ol. Alcotex 975 has a high hydrolysis level and a medium molecular weight.   FEATURES Ready to use solution. Forms very flexible films when dry. Dry films can be easily dissolved. Very receptive to ink jet printing inks. The dry film can be insolublised by crosslinking. Non-ionic copolymer.   Alcotex 975 is manufactured on a dedicated polymerisation plant in Harlow, England.
ALCOTEX™ B72 PVOH Alcotex B72 is polyvinyl alcohol which has been specially developed for use as a primary suspending agent for vinyl chloride suspension polymerisation. It is manufactured by Synthomer UK Ltd. using our exclusive manufacturing process which has advantages over other manufacturing methods, in that it allows more efficient control over the degree of hydrolysis and particle size of the product. NMR measurements have shown that Alcotex B72 has a block distribution of acetate groups.
ALCOTEX™ WD100 PVOH Alcotex WD100 is an aqueous solution of a 43% hydrolysed polyvinyl alcohol. It has been specifically developed by Synthomer Ltd as a secondary suspending agent for vinyl chloride polymerisation. Infinitely dilutable in water, and with an extremely low methanol content, Alcotex WD100 offers increased PVC resin porosity and reduced levels of gels or ‘fish eyes’ when compared to traditional products.In optimised recipes, improvements can be obtained in the porosity/bulk density relationship. Better porosity facilitates both monomer removal and plasticiser uptake. These criteria are further enhanced when Alcotex WD100 is used with the Alcotex range of primary suspending agents.  Alcotex WD100 is also compatible with other conventional primary suspending agents. NMR measurements have shown that Alcotex WD100 has a random distribution of acetate groups. The data below represents typical values obtained with different batches of Alcotex WD100.
AXILAT™ DF 6352 DD OTH AXILAT™ DF 6352 DD is a foam control agent based on a mixture of mineral oil and nonionic surfactants on an inert carrier. It is APEO free.
AXILAT™ DF 770 DD OTH Axilat™ DF 770 DD is a foam control agent based on a mixture of mineral oil and nonionic surfactants on an inert carrier. It is APEO free.
AXILAT™ DF 775 DD OTH Axilat™ DF 775 DD is a foam control agent based on a mixture of mineral oil and nonionic surfactants on an inert carrier. It is APEO free.
AXILAT™ HP 8510 VACO Axilat HP 8510 is a vinyl acetate, vinyl versatate copolymer resin in redispersible powder form. It is a highly versatile resin with high redispersibility in water and used in dry mortars.
AXILAT™ HP 8513  VACO Axilat™ HP 8513 is a vinyl acetate, vinyl versatate copolymer resin in redispersible powder form. 
AXILAT™ HP 8530 VACO Axilat HP 8530 is a hydrophobic vinyl acetate/vinyl versatate copolymer resin in redispersible powder form. It is a highly versatile resin with high redispersibility in water and used in dry mortars.
AXILAT™ HP 8538 VACO AXILAT HP 8538 is a redispersible-in-water powder, used in dry mortars to improve adhesion to conventional substrates, especially to polystyrene foam slabs hydrophobic properties mechanical properties workability of fresh mortar.
AXILAT™ PSB 150 XSBR Axilat ™ PSB 150 is a styrene butadiene copolymer powder resin that is redispersible in water. Axilat PSB 150 redisperses to a particle size that is one-tenth of conventional latex powders, resulting in a very high binder power and enhanced adhesion for end use formulations. It is highly recommended for gypsum-based applications.  
AXILAT™ RH 100 XP OTH Axilat RH 100 XP is a rheological agent for cement and gypsum-based mortars (thixotropy and anti-Segregation).
AXILAT™ RH 200 XP OTH Axilat RH 200 XP is a rheological agent for cement and gypsum-based mortars (thixotropy and anti-segregation). 
AXILAT™ SA 502 OTH Axilat SA 502 is a 100% amorphous “flash” alumina with a very high surface area. It is a set accelerator and can be used as an anti-shrinkage admixture for Portland cement.
AXILAT™ UP 600 B  VACO Axilat UP 600 B is a vinyl acetate, vinyl versatate and maleic ester copolymer resin in redispersible powder form. It is redispersible in water and used in dry mortars to improve workability of fresh mortar; hydrophobic properties; adhesion to conventional substrates, especially after severe ageing conditions; and mechanical properties (flexibility, abrasion resistance and cohesive strength). It is a plasticiser-free powder, particularly suitable for ecologically demanding systems.
AXILAT™ UP 620 E VACO Axilat UP 620 E is a vinyl acetate, vinyl versatate and maleic ester copolymer resin in redispersible powder form. It is redispersible in water and used in dry mortars to improve workability of fresh mortar; hydrophobic properties; adhesion to conventional substrates, especially after severe ageing conditions; and mechanical properties (flexibility, abrasion resistance and cohesive strength). It is a plasticiser-free powder, particularly suitable for ecologically demanding systems.
CHEMIGUM® LATEX 248 NBR Anionic aqueous dispersion of a butadiene-acrylonitrile copolymer
CHEMIGUM® LATEX 550 NBR Anionic aqueous dispersion of a carboxylated butadiene-acrylonitrile copolymer containing a non-staining, non-discolouring antioxidant
CHEMIGUM® LATEX 6271 NBR Anionic aqueous dispersion of a carboxylated butadiene-acrylonitrile copolymer 
CHEMIGUM® LATEX 6387 NBR Anionic aqueous dispersion of a butadiene-acrylonitrile copolymer containing a non-discolouring antioxidant
CHEMIGUM® P35 NBR-Dry Copolymer of butadiene-acrylonitrile partitioned with calcium carbonate
CHEMIGUM® P615DS NBR-Dry Copolymer of butadiene-acrylonitrile partitioned with calcium carbonate
CHEMIGUM® P7D NBR-Dry Copolymer of butadiene-acrylonitrile partitioned with calcium carbonate
CHEMIGUM® P83 NBR-Dry Copolymer of butadiene-acrylonitrile partitioned with PVC
CHEMIGUM® P86F NBR-Dry Copolymer of butadiene-acrylonitrile partitioned with calcium carbonate
CHEMIGUM® P8B-A NBR-Dry Copolymer of butadiene-acrylonitrile partitioned with PVC
CHEMIGUM® P8D NBR-Dry Copolymer of butadiene-acrylonitrile partitioned with calcium carbonate
EMULTEX™ 4300 VA EMULTEX 4300 is a compounded, polyvinyl alcohol stabilised, vinyl acetate dibutyl maleate copolymer dispersion.
EMULTEX™ A 1602 VA Aqueous emulsion of homopolymer vinyl acetate; non plasticized.
EMULTEX™ AD 230 VACO Emultex AD 230 is a water-based dispersion of vinyl acetate acrylic copolymer.Emultex AD 230 is properly recommended for coatings in contact with food and non-edible cheese rinds
EMULTEX™ FR 728 VACO EMULTEX FR 728 is a specially colloid stabilised vinyl acetate - vinyl versatate copolymer dispersion developed for formulation of water-borne intumescent coatings. EMULTEX FR 728 provides a quick char formation with high expansion factor.EMULTEX FR 728 is designed for intumescent coatings for fire protection up to R60.
EMULTEX™ FR 797 VACO EMULTEX FR 797 is a specially colloid stabilised and vinyl acetate - vinyl versatate copolymer dispersion developed for formulation of waterborne intumescent coatings. EMULTEX FR 797 provides a slow char formation with medium expansion factorEMULTEX FR 797 is recommended for intumescent coatings with fire protection up to 120min. 
EMULTEX™ VV 665 VACO EMULTEX VV 665 is a medium particle size, specially colloid stabilised vinyl acetate - vinyl versatate copolymer dispersion. EMULTEX VV 665 offers high scrub resistance, high gloss and good saponification resistance.EMULTEX VV 665 is recommended for solvent free matt and silk paints. When suitably compounded EMULTEX VV 665 is recommended as a binder in the production of flexible fillers, caulks and DIY cartridge applied sealants.
EMULTEX™ VV 675 VACO EMULTEX VV 675 is a medium particle size, colloid stabilised vinyl acetate - vinyl versatate copolymer dispersion. EMULTEX VV 675 offers high scrub resistance and high exterior durability. EMULTEX VV 675 is recommended for exterior masonry paints and silk to gloss interior wall paints.
EMULTEX™ VV 679 VACO EMULTEX VV 679 is a medium particle size, colloid stabilised vinyl acetate - vinyl versatate copolymer dispersion. EMULTEX VV 679 offers high scrub resistance and high gloss. EMULTEX VV 679 is recommended for matt and silk wall paints and also can be used in ready mixed fillers and ceramic tile adhesives.
ETHYL ACRYLATE STABILIZED Acrylic ester used for polymer manufacturing and as a raw material for syntheses. Molar Mass(g/mol): 100.12 Chemical formula: Stoichiometric formula: C5H8O2 CAS number: 140-88-5
GENGLAZE® EC-2447 OTH Heat-activated in-mold coating designed to enhance the surface of molded parts.GenGlaze EC-2447 in-mold coating surface finish is incorporated during compression molding instead of being applied separately. It is environmentally friendly as it does not contain solvents (100% solids), and reduces the number of surface finishing steps and manufacturing costs. 
H301 PVAC H301 is a medium / low molecular weight, solid polyvinyl acetate, developed for use as a thermoplastic low profile additive in unsaturated polyester composites. H301 is a carboxylated polymer which achieves low solution viscosity, efficient compound thickening, very low shrinkage and excellent mould release. FEATURES Rapidly dissolves in most organic solvents including styreneHigh thickening efficiencyExcellent solution stability and compatibilityNo shrinkageHigh gloss H301 is manufactured on a dedicated polymerisation plant and is produced in the form of colourless beads.
H302 PVAC H302 is a medium / high molecular weight, solid polyvinyl acetate, developed for use in unsaturated polyester composites. H302 is a carboxylated polymer which achieves efficient compound thickening, very low shrinkage and excellent mould release.   FEATURES Rapidly dissolves in most organic solvents including styrene High thickening efficiency Excellent solution stability No shrinkage High gloss   H302 is manufactured on a dedicated polymerisation plant and is produced in the form of colourless beads.
H356 PVAC H356 is a low molecular weight, solid polyvinyl acetate dibutyl maleate copolymer. It is designed for use as a low profile additive in unsaturated polyester composites, typically in room temperature curing processes.   FEATURES Dissolves in most organic solvents including styrene Low viscosity styrene solution Soft and highly thermoplasticExcellent shrinkage control in room temperature cured composites  H356 is manufactured on a dedicated polymerisation plant and is produced in the form of a melt processable solid.
Hydro PLIOLITE® 010 SA Water-based acrylic modified resin based on proprietary Emulsifed Binding System (EBS) that provides outstanding adhesion to porous substrate and excellent film formation even in difficult conditions (low temperatrure and high humidity) that ensures excellent durability.Hydro Pliolite 010 is recommended for flat exterior masonry coatings, pigmented primers or interior tension-free paints.
HYDRO PLIOLITE™ 050 PA Acrylate copolymer based on our ABS (Amphoteric Binding System) technology, contains anionic and cationic groups. Blocks many stains, including tannin, marker, and water stains.Hydro PLIOLITE 050 water-based resin was designed for low VOC stain blocking primers.
HYDRO PLIOLITE™ 125 XSBR Hydro Pliolite 125 is a modified styrene butadiene copolymer with excellent odor blocking properties. Hydro Pliolite 125 was designed for the formulation of primers and coatings with odor blocking properties, especially those used in fire restoration projects.
HYDRO PLIOLITE™ 211 SA Hydro Pliolite 211 is a modified  styrene-acrylic copolymer dispersion developed for formulation of water-borne intumescent coatings. Hydro Pliolite 211 has excellent water resitance that allows intumescent coatings to resist to outdoor conditions.Hydro Pliolite 211 is designed for intumescent coatings for fire protection from R30 to R120.
HYDRO PLIOLITE™ 330 PA Hydro Pliolite 330 is a multiphase pure acrylic copolymer dispersion designed for application on wood . Hydro Pliolite 330 provides an excellent adhesion and enhanced film formation in adverse climatic conditions that allows formulation of weather- and surface-tolerant wood coatings. Hydro Pliolite 330 is suitable for formulation of wood stains and wood trim paints.
LIPATON™ L 8262 XSBR LIPATON L 8262 is an aqueous styrene butadiene copolymer dispersion that is APEO free. This dispersion gives plasticising properties in cementitious systems. It also improves adhesion on various substrates.
LIPATON™ SB 20W20 XSBR LIPATON SB 20W20 is an anionic carboxylated styrene/butadiene copolymer latex.
LIPATON™ SB 2540 HSSBR LIPATON SB 2540 is an aqueous high solids dispersion of a styrene-butadiene copolymer. The dispersion is free from solvents and plasticizers and does not contain antioxidant.
LIPATON™ SB 29Y141 XSBR LIPATON SB 29Y141 is a water-based non-ionically stabilized hydrolysis-resistant dispersion of a carboxylated styrene-butadiene copolymer. It contains an antioxidant and an antifoam and is compatible with most hydraulic binders. LIPATON SB 29Y141 has been designed particularly for applications like industrial flooring screeds. This product is free from APEOs and ammonia.
LIPATON™ SB 29Y146 XSBR LIPATON SB 29Y146 is a water-based non-ionically stabilized hydrolysis-resistant dispersion of a carboxylated styrene-butadiene copolymer. The dispersion is freeze-thaw stable. It contains an antioxidant and an antifoam and is compatible with most hydraulic binders.This product is free from APEOs and ammonia.
LIPATON™ SB 30Y160 XSBR LIPATON SB 30Y160 is a non-ionically stabilized, hydrolysis-resistant carboxylated styrenebutadiene copolymer latex. The dispersion contains an antioxidant and an antifoam agent, which is very effective for its use in hydraulic binders. This product is free from APEOs and ammonia.
LIPATON™ SB 33Y50 XSBR LIPATON SB 33Y50 is an aqueous non-ionically stabilized dispersion of a carboxylated butadiene-styrene copolymer latex which is resistant against saponification. The dispersion is freeze-thaw stable.
LIPATON™ SB 4520 XSBR LIPATON SB 4520 is a finely dispersed aqueous dispersion of a carboxylated styrene-butadiene copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, solvents and plasticizers.
LIPATON™ SB 47B40 XSBR LIPATON SB 47B40 is an anionic, carboxylated styrene-butadiene copolymer latex containing a non-staining antioxidant.
LIPATON™ SB 5521 XSBR Finely dispersed aqueous dispersion of a carboxylated styrene-butadiene copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, APEO, solvents and plasticizers.LIPATON SB 5521 is a hydrophobic and elastic polymer. It is highly recommended for anti-corrosive primers and underbody coatings.
LIPATON™ SB 5843 XSBR LIPATON SB 5843 is a ready-for-use aqueous dispersion of a styrene-butadiene copolymer with high stability against electrolytes. It contains an APEO free anionic/nonionic emulsifier system and is free from film forming aids, solvents, plasticizers, and ammonia. LIPATON SB 5843 contains a special defoamer to reduce the air content in cement mortars.
LIPATON™ SB 60B11 XSBR LIPATON SB 60B11 is an anionic, carboxylated styrene-butadiene copolymer latex containing a non-staining antioxidant.
LIPOLAN™ F 2040F HSSBR LIPOLAN F 2040F is an aqueous dispersion of a styrene-butadiene copolymer with a high solids content. The emulsifier used is an alkaline salt of fatty acids, which provides a good stability and foamability. LIPOLAN F 2040F does not contain any antioxidant. LIPOLAN F 2040F is mainly used to produce moulded foam. Foam made of LIPOLAN F 2040F exhibits a very soft indentation hardness with a very high resilience.
LIPOLAN™ F 2420F HSSBR LIPOLAN® F 2420F is an aqueous dispersion of a reinforced styrene-butadiene copolymer with a high solids content. The emulsifier used is an alkaline salt of fatty acids, which provides a good stability and foamability. Moulded foam based on LIPOLAN® F 2420F exhibits a soft indentation hardness with good resilience.
LIPOLAN™ F 2530F HSSBR Moulded foam products based on LIPOLAN F 2530F exhibit under usual ambient conditions a low indentation hardness with a low resilience, achieving a unique visco-elastic effect. LIPOLAN F 2530F is an aqueous dispersion of a styrene-butadiene copolymer with a high solids content. It is stabilsed using an alkaline salt of fatty acids, which also provides a good foamability. LIPOLAN F 2530F does not contain any antioxidant.
LIPOLAN™ F 2610F HSSBR LIPOLAN® F 2610F is an aqueous dispersion of a reinforced styrene-butadiene copolymer with a high solids content. The emulsifier used is an alkaline salt of fatty acids, which provides a good stability and foamability. Moulded foam based on LIPOLAN® F 2610F exhibits a high indentation hardness with a good resilience.
LIPOLAN™ F 2810F HSSBR LIPOLAN® F 2810F is an aqueous dispersion of a reinforced styrene-butadiene copolymer with a high solids content. The emulsifier used is an alkaline salt of fatty acids, which provides a good stability and foamability. Moulded foam based on LIPOLAN® F 2810F exhibits a very high indentation hardness with a good resilience.
LIPOLAN™ F 2820F HSSBR LIPOLAN® F 2820F is an aqueous dispersion of a reinforced styrene-butadiene copolymer with a high solids content. The emulsifier used is an alkaline salt of fatty acids, which gives the product good stability and foamability. Moulded foam based on LIPOLAN® F 2820F exhibits a medium high indentation hardness with a good resilience.
LIPOLAN™ T 24H60 HSSBR LIPOLAN® T 24H60 is an aqueous dispersion of a reinforced styrene-butadiene copolymer with a high solids content. The emulsifier used is an alkaline salt of fatty acids, which gives the product good stability and foamability. LIPOLAN® T 24H60 was developed for foam rubber backings for tufted carpets. LIPOLAN® T 24H60 is suitable for non-gel and ammonium acetate recipes. Foam rubber backings containing LIPOLAN® T 24H60 are softer than those based on LIPOLAN® T 26H60. The handle of the finished article is influenced mainly by the choice of the precoat.
LIPOLAN™ T 24H70 HSSBR LIPOLAN® T 24H70 is an aqueous dispersion of a reinforced styrene-butadiene copolymer with a high solids content. The emulsifier used is an alkaline salt of fatty acids, which gives the product good stability and foamability. LIPOLAN® T 24H70 was developed for sodium silicofluoride gelled foam rubber backings for tufted carpets. LIPOLAN® T 24H70 can also be used in non-gel foam compounds. Foam rubber backings containing LIPOLAN® T 24H70 are softer than those based on LIPOLAN® T 28H60 and LIPOLAN® T 28H70. The handle of the finished article is influenced mainly by the choice of the precoat.
LIPOLAN™ T 26H60 HSSBR LIPOLAN® T 26H60 is an aqueous dispersion of a reinforced styrene-butadiene copolymer with a high solids content. The emulsifier used is an alkaline salt of fatty acids, which gives the product good stability and foamability. LIPOLAN® T 26H60 was developed for foam rubber backings for tufted carpets. LIPOLAN® T 26H60 is suitable for non-gel and ammonium acetate recipes. Foam rubber backings containing LIPOLAN® T 26H60 are harder than those based on LIPOLAN® T 24H60. The handle of the finished article is influenced mainly by the choice of the precoat.
LIPOLAN™ T 28H60 HSSBR LIPOLAN® T 28H60 is an aqueous dispersion of a reinforced styrene-butadiene copolymer with a high solids content. The emulsifier used is an alkaline salt of fatty acids, which gives the product good stability and foamability. LIPOLAN® T 28H60 was developed for sodium silicofluoride gelled foam rubber backings for tufted carpets. LIPOLAN® T 28H60 can also be used in non-gel foam compounds. Foam rubber backings containing LIPOLAN® T 28H60 are harder than those based on LIPOLAN® T 28H70 and LIPOLAN® T 24H70. The handle of the finished article is influenced mainly by the choice of the precoat.
LIPOLAN™ T 28H70 HSSBR LIPOLAN® T 28H70 is an aqueous dispersion of a reinforced styrene-butadiene copolymer with a high solids content. The emulsifier used is an alkaline salt of fatty acids, which gives the product good stability and foamability. LIPOLAN® T 28H70 was developed for sodium silicofluoride gelled foam rubber backings for tufted carpets. LIPOLAN® T 28H70 can also be used in non-gel foam compounds. Foam rubber backings containing LIPOLAN® T 28H70 are softer than those based on LIPOLAN® T 28H60 and harder than those based on LIPOLAN® T 24H70. The handle of the finished article is influenced mainly by the choice of the precoat.
LIPREN™ B CR LIPREN B is an aqueous high solids dispersion of a polymer of 2-chlorobutadiene (1.3). The dispersion contains an anionic emulsifier system and is free from film forming aids, solvents and plasticizers.
LIPREN™ MKB CR LIPREN MKB is an aqueous, colloidal dispersion of a polymer of 2-chlorobutadiene (1,3). Its vulcanizates have a slight to medium crystallization tendency. LIPREN MKB is mainly used as a binder for fibres of all types.
LIPREN™ T CR LIPREN T is an aqueous, colloidal dispersion of a polymer of 2-chlorobutadiene (1,3). Its vulcanizates have a slight to medium crystallization tendency and undergo little discolouration when exposed to light. LIPREN T is mainly used in the production of dipped goods.
LIPREN™ X1112 CR LIPREN X1112 is an aqueous, colloidal dispersion of polymerised 2-chlorobutadiene (1,3). Vulcanised LIPREN X1112 has very little tendency to crystallize. LIPREN X1112 is mainly used in the production of dipped goods, but also for the production of flame retardant foams. It is either foamed or used to impregnate PU foams.
LITEX™ ALKASHIELD 1540 XSBR LITEX ALKASHIELD 1540 is an aqueous, anionic dispersion of a carboxylated self-crosslinking butadiene styrene copolymer containing a non-staining antioxidant.
LITEX™ ALKASHIELD 1543 XSBR LITEX ALKASHIELDTM 1543 is an aqueous, anionic dispersion of a carboxylated self-crosslinking butadiene styrene copolymer containing a non-staining antioxidant.
LITEX™ LB-420 XSBR LITEX LB-420 is a styrene/butadiene copolymer latex for use as a binder in the anode of lithium-ion batteries. It offers excellent mechanical and electrochemical performance.  
LITEX™ LB-422 XSBR LITEX LB-422 is a styrene/butadiene copolymer latex used as a binder in the anode of lithium-ion batteries. It offers a good balance of properties and cold temperature processing.
LITEX™ N 3415 M NBR LITEX N 3415 M is an aqueous, colloidal dispersion of a carboxylated butadiene-acrylonitrile copolymer. LITEX N 3415 M contains an anionic/non-ionic emulsifier system and is stabilized with an antioxidant.
LITEX™ N 7012N NBR Litex N 7012N is an aqueous, anionic dispersion of a carboxylated styrene butadiene acrylonitrile copolymer containing a non-staining antioxidant.
LITEX™ NX 1200 NBR LITEX NX 1200 is an aqueous, plasticizer-free and formaldehyde reduced dispersion of a butadiene-acrylonitrile copolymer that can be crosslinked by heat. LITEX NX 1200 contains an anionic-nonionic emulsifier system and is stabilized with an antioxidant.
LITEX™ P 5100 XSBR LITEX P 5100 is an aqueous, anionic carboxylated styrene/butadiene copolymer dispersion, which is used as a binder for coating colours in the paper industry.
LITEX™ P 7100 XSBR LITEX P 7100 is an aqueous, anionic carboxylated styrene/butadiene copolymer dispersion, which is used as a binder for coating colours in the paper industry.
LITEX™ P 7110 XSBR LITEX P 7110 is an aqueous, anionic carboxylated styrene/butadiene copolymer dispersion, which is used as a binder for coating colours in the paper industry.
LITEX™ PX 9330 XSBR LITEX PX 9330 is an aqueous, anionic carboxylated styrene/butadiene copolymer dispersion, which is used as a binder for coating colours in the paper industry.
LITEX™ PX 9512 XSBR LITEX PX 9512 is an aqueous, anionic carboxylated styrene/butadiene copolymer dispersion, which is used as a binder for coating colours in the paper industry.
LITEX™ QUICKSHIELD 1545 XSBR LITEX QuickShield 1545 is an aqueous emulsion of a formaldehyde free, self-crosslinking copolymer of butadiene and styrene.
LITEX™ S 10656 XSBR LITEX S 10656 is an aqueous, anionic dispersion, of a carboxylated self-crosslinking butadiene styrene methacrylate copolymer, containing a non-staining antioxidant.
LITEX™ S 10726 XSBR LITEX S 10726 is an aqueous, anionic dispersion of a carboxylated self-crosslinking butadiene styrene copolymer, containing a non-staining antioxidant.
LITEX™ S 10867 XSBR Litex S 10867 is an aqueous, anionic dispersion of a carboxylated self-crosslinking butadiene styrene copolymer containing a non-staining antioxidant.
LITEX™ S 2806 XSBR Litex S 2806 is an aqueous NH3 free colloidal dispersion of a copolymer of butadiene and styrene with carboxylic groups. It is stabilised by an anionic emulsifier and does not contain an antioxidant agent. It is a versatile latex grade for footwear applications and can be used as a binder for fabrics, paper and cardboard. Toe puff and counter material becomes thermoformable, stiff and grindable with Litex S 2806.
LITEX™ S 79A10 XSBR Litex S 79A10 is a carboxylated styrene/butadiene copolymer latex.
LITEX™ S 9076 XSBR Litex S 9076 is an aqueous, anionic dispersion of a self-crosslinking butadiene styrene copolymer containing a non-staining antioxidant.
LITEX™ SBV 600 XSBR LITEX SBV 600 is an aqueous emulsion of a self-crosslinking copolymer of butadiene and styrene.
LITEX™ SKYSHIELD 4685 XSBR LITEX SkyShield 4685 is an aqueous emulsion of a formaldehyde free, self-crosslinking copolymer of butadiene and styrene.
LITEX™ SX 1009 XSBR LITEX S X 1009 is an aqueous colloidal dispersion of a styrene-butadiene copolymer with carboxyl groups. LITEX S X 1009 contains an anionic emulsifier system.
LITEX™ T 56K20 XSBR Litex® T 56K20 is an aqueous dispersion of a carboxylated styrene-butadiene copolymer. The dispersion was developed for secondary backing, particularly for the two coat process. When this technique is employed the handle of the carpet is mainly influenced by the choice of the dispersion for the precoat. Litex® T 56K20 also can be used for the one coat process. When this technique is employed the dispersion gives the carpet a soft handle. Litex® T 56K20 contains an antioxidant.
LITEX™ T 56R60 XSBR Litex® T 56R60 is an aqueous dispersion of a carboxylated styrene-butadiene copolymer. The dispersion was developed for secondary backing, particularly for the two coat process. When this technique is employed the handle of the carpet is mainly influenced by the choice of the dispersion for the precoat. Litex® T 56R60 also can be used for the one coat process. When this technique is employed the dispersion gives the carpet a soft handle. Litex® T 56R60 contains an antioxidant.
LITEX™ T 56S10 XSBR Litex® T 56S10 is an aqueous dispersion of a carboxylated styrene-butadiene copolymer. The dispersion was developed for secondary backing, particularly for the two coat process. When this technique is employed the handle of the carpet is mainly influenced by the choice of the dispersion for the precoat. Litex® T 56S10 also can be used for the one coat process. When this technique is employed the dispersion gives the carpet a soft handle. Litex T ® T 56S10 is produced with a low ammonia content and contains an antioxidant.
LITEX™ T 57K20 XSBR Litex® T 57K20 is an aqueous dispersion of a carboxylated styrene-butadiene copolymer. The dispersion was developed for secondary backing, particularly for the two coat process. When this technique is employed the handle of the carpet is mainly influenced by the choice of the dispersion for the precoat. Litex® T 57K20 also can be used for the one coat process. When this technique is employed the dispersion gives the carpet a medium hard handle. Litex® T 57K20 contains an antioxidant.
LITEX™ T 58K20 XSBR Litex® T 58K20 is an aqueous dispersion of a carboxylated styrene-butadiene copolymer. The dispersion was developed for secondary backing, particularly for the two coat process. When this technique is employed the handle of the carpet is mainly influenced by the choice of the dispersion for the precoat. Litex® T 58K20 also can be used for the one coat process. When this technique is employed the dispersion gives the carpet a hard handle. Litex® T 58K20 contains an antioxidant.
LITEX™ T 59K20 XSBR Litex® T 59K20 is an aqueous dispersion of a carboxylated styrene-butadiene copolymer. Litex® T 59K20 gives the textiles a hard handle. Litex® T 59K20 contains an antioxidant.
LITEX™ T 64W20 XSBR Litex® T 64W20 is an aqueous dispersion of a carboxylated styrene-butadiene copolymer. The dispersion was specially designed for the impregnation of needlefelt and also for the finishing of woven carpets. Litex® T 64W20 give the finished article a soft handle. Litex® T 64W20 is totally compatible with Litex® T 68W20. The products can therefore be mixed in any ratio to achieve the desired handle. Litex® T 64W20 contains an antioxidant.
LITEX™ T 66W50 XSBR Litex® T 66W50 is an aqueous dispersion of a carboxylated styrene-butadiene copolymer. The dispersion was specially designed for the impregnation of needlefelt and also for the finishing of woven carpets. Litex® T 66W50 give the finished article a medium hard handle. Litex® T 66W50 contains an antioxidant.
LITEX™ T 67W50 XSBR Litex® T 67W50 is an aqueous dispersion of a carboxylated styrene-butadiene copolymer. The dispersion was specially designed for the impregnation of needlefelt and also for the finishing of woven carpets. Litex® T 67W50 give the finished article a medium hard handle. Litex® T 67W50 contains an antioxidant.
LITEX™ T 68W20 XSBR Litex® T 68W20 is an aqueous dispersion of a carboxylated styrene-butadiene copolymer. The dispersion was specially designed for the impregnation of needlefelt and also for the finishing of woven carpets. Litex® T 68W20 give the finished article a hard handle. Litex® T 68W20 is totally compatible with Litex® T 64W20. The products can therefore be mixed in any ratio to achieve the desired handle. Litex® T 68W20 contains an antioxidant.
LITEX™ T 71S20 XSBR Litex® T 71S20 is an aqueous dispersion of a carboxylated styrene-butadiene copolymer. The dispersion was developed for compounds designed for the production of drainage points and also for rubber crumb backings. It can also be used for precoats. When Litex® T 71S20 is used for precoats, the dispersion gives the carpets a soft handle. Litex® T 71S20 contains an antioxidant.
LITEX™ T 77A40 XSBR Litex T 77A40 is an aqueous dispersion of a carboxylated styrene butadiene copolymer. Litex T 77A40 gives the textiles a very stiff handle.
LITEX™ T 77N40 XSBR Litex® T 77N40 is an aqueous dispersion of a carboxylated styrene-butadiene copolymer. Litex® T 77N40 gives the textiles a very hard handle. Litex® T 77N40 contains an antioxidant.
LITEX™ T 79N40 XSBR Litex® T 79N40 is an aqueous dispersion of a carboxylated styrene-butadiene copolymer. Litex® T 79N40 gives the textiles a very hard handle.
LITHENE™ ULTRA AH LPBD Lithene ultra AH is a highly viscous, low molecular weight, liquid polybutadiene with a high content of 1,2 vinyl and cyclic vinyl microstructures. It is a low odour  and low VOC product used as a  binder in automotive adhesives, coagent for EPDM rubbers and in hard electrical encapsulation systems.   TYPICAL APPLICATIONS   Automotive semi structural  adhesives Hard electrical encapsulants Coagent in EPDM rubber compounds   Lithene ultra AH is despatched from our UK production plant.
LITHENE™ ULTRA AL LPBD Lithene ultra AL is a viscous low molecular weight, liquid polybutadiene with high content of 1,2 vinyl and cyclic vinyl microstructures. It has low odour and is used as a binder in automotive sealants and in UV cured flexographic printing plates.   TYPICAL APPLICATIONS   Automotive sound damping sealants Automotive semi structural adhesives Antifoaming coating additives Plasticiser for flexographic printing plates   Lithene ultra AL is despatched from our UK production plant.
LITHENE™ ULTRA AL-15MA LPBD Lithene ultra AL-15MA is a highly viscous, low molecular weight, liquid polybutadiene. It is produced from the low odour base Lithene ultra AL, adducted with 15 parts maleic anhydride. It is used as a highly efficient adhesion promoter in sulphur cured automotive sealants.   TYPICAL APPLICATIONS   Adhesion promoter in automotive sealants and semi structural adhesives Rubber to metal adhesion promoter Electrical encapsulants   Lithene ultra AL-15MA is despatched from our UK production plant.
LITHENE™ ULTRA N4-5000 LPBD Lithene ultra N4-5000 is a medium viscosity, narrow molecular weight, liquid polybutadiene with a low content of 1,2 vinyl micro structure. It is extremely low in both odour and volatiles and it can be used as a component in PU mould release formulations or as a base for further chemical modification such as maleinisation.    TYPICAL APPLICATIONS   Polyurethane foam mould release additive Dry sand binder Base polymer for maleinisation   Lithene ultra N4-5000 is despatched from our UK production plant.
LITHENE™ ULTRA N4-5000-10MA LPBD Lithene ultra N4-5000-10MA is a viscous, low molecular weight, liquid polybutadiene. The polymer is very low in odour and volatiles and is produced from a narrow molecular weight polybutadiene base, adducted with 10 parts maleic anhydride.   TYPICAL APPLICATIONS: Soft, isocyanate free, electrical encapsulants Rubber to metal bonding   Lithene ultra N4-5000-10MA is despatched from our UK production plant>
LITHENE™ ULTRA N4-5000-15MA LPBD Lithene ultra N4-5000-15MA is a highly viscous, low molecular weight, liquid polybutadiene. It is very low in odour and volatiles and is based on a narrow molecular weight polybutadiene adducted with 15 parts maleic anhydride.   TYPICAL APPLICATIONS:   Soft, isocyanate free electrical encapsulants Adhesion promoter in automotive sealants Rubber to metal adhesion promoter Impact modifier for polyester resins   Lithene ultra N4-5000-15MA is despatched from our UK production plant.
LITHENE™ ULTRA N4-9000 LPBD Lithene ultra N4-9000 is a viscous, narrow molecular weight liquid polybutadiene with a low content of 1,2 vinyl micro structure. It is extremely low in both odour and volatiles and can be used as a polyurethane additive to improve abrasion resistance.   TYPICAL APPLICATIONS   Polyurethane additive for abrasion resistance Automotive sound damping sealants & adhesives Dry sand binder   Lithene ultra N4-9000 is despatched from our UK production plant.
LITHENE™ ULTRA N4-B-10MA LPBD Lithene ultra N4-B-10MA is a viscous, low molecular weight, liquid polybutadiene. The polymer is very low in odour and volatiles and is produced from a broad molecular weight polybutadiene base, adducted with 10 parts maleic anhydride.   TYPICAL APPLICATIONS:   Adhesion promoter in automotive sealants Soft, isocyanate free electrical encapsulants Rubber to metal bonding Formulation of slow release fragrance gels   Lithene ultra N4-B-10MA is despatched from our UK production plant.
LITHENE™ ULTRA P4-150P LPBD Lithene ultra P4-150P is a highly viscous, low molecular weight, liquid polybutadiene with microstructure containing 1,2 vinyl groups. It is very low in both odour and volatiles and can be used in chlorinated rubber feedstocks or automotive sealants.   TYPICAL APPLICATIONS   Feedstock for chlorinated rubber  Automotive sound damping sealants & adhesives    Lithene ultra P4-150P is despatched from our UK production plant.
LITHENE™ ULTRA P4-25P LPBD Lithene ultra P4-25P is a viscous, low molecular weight, liquid polybutadiene with a medium content of 1,2 vinyl microstructure. It is extremely low in both odour and volatiles and can be used as a reactive plasticiser in flexographic printing plates.   TYPICAL APPLICATIONS   Reactive plasticiser in flexographic printing plates Mould release additive for polyurethane foams Antifoaming coating additives   Lithene ultra P4-25P is despatched from our UK production plant.
LITHENE™ ULTRA PH LPBD Lithene ultra PH is a viscous, low molecular weight, liquid polybutadiene with a high content of 1,2 vinyl microstructure. It has extremely low odour and volatiles and is used in EPDM rubbers as a coagent and formulation of hard electrical encapsulants.   TYPICAL APPLICATIONS   Coagent in EPDM rubber compounds Hard electrical encapsulants Antifoaming coating additive Reactive plasticiser in UV cure flexographic printing plates   Lithene ultra PH is despatched from our UK production plant.
LITHENE™ ULTRA PM4 LPBD Lithene ultra PM4 is a low viscosity, low molecular weight, liquid polybutadiene with a medium content of 1,2 vinyl microstructure. It is extremely low in both odour and volatiles and is used as the binder in automotive sound damping sealants, polyurethane mould release systems and solvent based coating additives.   TYPICAL APPLICATIONS   Automotive sound damping sealants Antifoaming coating additives Non volatile drying oil in alkyd coatings Sand binder for paving and moulds   Lithene ultra PM4 is despatched from our UK production plant.
LITHENE™ ULTRA PM4-7.5MA LPBD Lithene ultra PM4-7.5MA is a medium viscosity, low molecular weight, liquid polybutadiene. It is very low in odour and volatiles and is produced from Lithene ultra PM4, adducted with 7.5 parts maleic anhydride.   TYPICAL APPLICATIONS   Adhesion promoter in automotive sealants Rubber to metal adhesion promoter Soft, isocyanate free electrical encapsulants   Lithene ultra PM4-7.5MA is despatched from our UK production plant.
LITHENEACTIV™ 1000 LPBD LitheneActiV 1000 is a liquid polybutadiene with very high content of 1,2 vinyl microstructure. It is a highly reactive polymer with low volatiles and odour. It is designed for use as a highly effective Type II coagent in peroxide or sulphur cured elastomers where it allows better mixing and enhanced physical cured thermoset properties.   TYPICAL APPLICATIONS  Automotive sulphur or peroxide cured sealants & adhesivesCoagent in sulphur or peroxide cured rubbers and elastomers   LitheneActiV 1000 is despatched from our UK production plant.
LITHENEACTIV™ 50 LPBD LitheneActiV 50 is a liquid polybutadiene with very high content of 1,2 vinyl microstructure. It is a highly reactive polymer with low volatiles and odour. It is used as a reactive plasticiser in UV cured flexographic printing plates and as a reactive diluent in solvent based coating systems.   TYPICAL APPLICATIONS   Reactive plasticiser for flexographic printing plates Automotive semi structural adhesives Reactive diluent in solvent based coating systems   LitheneActiV 50 is despatched from our UK production plant.
LYTRON™ 180 SA Mildly acidic brilliant white opacifier preserved with 2-bromo-2-nitropropane-1,3-diol.Lytron 180 opacifier for bath and shower products, including liquid hand wash and soaps, laundry detergents, and cleaners 
LYTRON™ 180 AV SA Acidic un-neutralized opacifier for home and personal care products with no added preservatives.Lytron 180 AV styrene acrylic copolymer opacifier for bath and shower products, including liquid hand wash and soaps, laundry detergents, and cleaners.
M25 PVAC M25 is a low molecular weight, solid polyvinyl acetate. It is designed for use in solvent based coatings, inks and adhesives or melt extrusion systems. FEATURES Rapidly dissolves in most organic solventsCan be melt processedEasily plasticisedCan be combined with other M GradesExcellent substrate adhesion & high film flexibilityVery high light stability M25 is manufactured on a dedicated polymerisation plant and is produced in the form of colourless beads.
M30 PVAC M30 is a low molecular weight, solid polyvinyl acetate. It is designed for use in solvent based coatings, inks and adhesives or melt extrusion systems. M30 can also be used as a low profile additive in unsaturated polyester composites, typically pultrusion and BMC processes.   FEATURES Rapidly dissolves in most organic solvents. Can be melt processed. Easily plasticised. Can be combined with other M Grades. Excellent substrate adhesion & film flexibility. Very high light stability.   M30 is manufactured on a dedicated polymerisation plant and is produced in the form of colourless beads.
M35/73 SOLUTION PVAC M35/73 Solution is a copolymer of vinyl acetate and dibutyl maleate dissolved in ethyl acetate. It is designed for use mainly in solvent based coatings, where it can be diluted for use as a highly efficient primer and sealer.   FEATURES Miscible with most organic solvents Very high resistance to hydrolysis Solution polymer Rapid penetration and binding Excellent low temperature heat seal   M35/73 Solution is manufactured on a dedicated polymerisation plant and is produced in the form of a colourless solution.
M40 PVAC M40 is a medium molecular weight, solid polyvinyl acetate. It is designed for use in solvent based coatings, inks and adhesives or melt extrusion systems. M40 can also be used as a low profile additive in unsaturated polyester composites, typically pultrusion and BMC processes.   FEATURES Rapidly dissolves in most organic solvents including styrene Can be melt processed Easily plasticised Can be combined with other M Grades Excellent low profile performance in BMC & pultrusion processes   M40 is manufactured on a dedicated polymerisation plant and is produced in the form of colourless beads.
M45 PVAC M45 is a medium to high molecular weight, solid polyvinyl acetate. It is designed for use in solvent based coatings, inks and adhesives or melt extrusion systems. M45 can also be used as a low profile additive in unsaturated polyester composites, typically pultrusion and BMC processes. FEATURES Rapidly dissolves in most organic solvents including styreneCan be melt processedEasily plasticisedCan be combined with other Synthomer M GradesExcellent low profile performance in BMC & pultrusion processes M45 is manufactured on a dedicated polymerisation plant and is produced in the form of colourless beads.
M50 PVAC M50 is a medium molecular weight, solid polyvinyl acetate. It is designed for use in solvent based general purpose or parquet adhesives, coatings and inks, melt extrusion systems such as automotive sound damping foils and as a B side carrier in polyester SMC manufacture.   FEATURES Rapidly dissolves in most organic solvents. Can be melt processed. Easily plasticised. Can be combined with other M Grades. Excellent adhesion to a wide range of substrates. Very high UV & light stability.   M50 is manufactured on a dedicated polymerisation plant and is produced in the form of colourless beads.
M60 PVAC M60 is a medium high molecular weight, solid polyvinyl acetate. It is designed for use in solvent based coatings, inks and adhesives or melt extrusion systems such as automotive sound damping foils.   FEATURES Rapidly dissolves in most organic solvents. Can be melt processed. Easily plasticised. Can be combined with other M Grades. Excellent adhesion to a wide range of substrates. Very high light and thermal stability.   M60 is manufactured on a dedicated polymerisation plant and is produced in the form of colourless beads.
MCT5 PVAC MCT5 is a low molecular weight, solid copolymer of vinyl acetate and crotonic acid. It is an extremely versatile polymer soluble in both solvent and alkaline aqueous systems.   FEATURES Rapidly dissolves in most organic solvents Dissolves in aqueous systems at pH >7.0 Can be melt processed and plasticised Crosslinkable Can be combined with other M Grades Very high adhesion to metals and plastics High light stability   MCT5 is manufactured on a dedicated polymerisation plant and is produced in the form of clear, slightly yellow granules.
MCT5AMF PVAC MCT5AMF solution is a copolymer of vinyl acetate and crotonic acid in an ammonia neutralised ethanol/water mixture. It is designed for use in the production of inks and coatings as well as modification of adhesives.   FEATURES Miscible with many organic solvents Solution polymer Rapid penetration and binding Excellent adhesion to metals   MCT5AMF is manufactured on a dedicated polymerisation plant and is produced in the form of a colourless to pale yellow, slightly hazy solution.
METHYL ACETATE-METHANOL MIXTURE OTH Methyl Acetate-Methanol is a good solvent for paint and spirit based coatings. It can also be used as a precursor for other chemical processes such as acetate production or for conversion to acetic acid whilst recovering methanol.
METHYL ACRYLATE, STABILIZED Acrylic ester used for polymer manufacturing and as a raw material for syntheses. Molar Mass(g/mol): 86.09 Chemical formula: Stoichiometric formula: C4H6O2CAS number: 96-33-3
MOR-GLO™ 2E SA Floor finish, water-based styrene acrylic, polymer emulsion for high traffic applications, such as schools, hospitals and retail.Mor-Glo 2E very hard and durable zinc crosslinked polymer provides premium performance in high traffic floor areas. It features excellent black heel mark (BHMR), scuff and dirt resistance.
MOR-GLO™ ULTRA G SA Zinc-free Twin-LinkedTM, water-based styrene acrylic, polymer emulsion for low or high maintenance floor polish formulations.Mor-Glo Ultra G zinc-free polymer delivers the durability and performance of premium zinc-containing finishes. It is crosslinked using SYNTHOMER Solutions' Twin-LinkedTM technology to deliver premium durability and performance.
MOR-SHINE™ 465 OTH Mor-Shine 465 is a fully formulated floor finish concentrate for vinyl composition tiles and flexible surfaces.Mor-Shine 465 allows for reduced penetration on porous substrates and resistance to surface scratching. It enables excellent levelling and hold-out characteristics for good gloss finish.
MOR-SHINE™ 548T OTH Mor-Shine 548T is a fully formulated floor polish concentrate for vinyl composition tiles and flexible surfaces.Mor-Shine 548T allows for reduced penetration on porous substrates and resistance to surface scratching. It enables excellent levelling and hold-out characteristics for good gloss finish.
MOR-SHINE™ E OTH Mor-Shine E is a dry-bright polish concentrate with excellent gloss retention, as well as mar and scratch resistance.Mor-Shine E is used for general purpose finishes that respond to low and high maintenance schedules.
MYKON™ HLC OTH Lubricant for nonwovens, textiles, and paper applications.
N-BUTYL ACRYLATE, STABILIZED Acrylic ester used for polymer manufacturing and as a raw material for syntheses. Molar Mass(g/mol): 128.17 Chemical formula:Stoichiometric formula: C7H12O2CAS: 141-32-2
PLEXTOL™ A 6474 PA PLEXTOL A 6474 is an aqueous dispersion of an acrylic copolymer with heterogeneous particle morphology. PLEXTOL A 6474 is a binder for exterior and interior clear or pigmented wood coatings.
PLEXTOL™ B 500 PA Aqueous dispersion of a non-ionic stabilized thermoplastic acrylic polymer. The dispersion is free from film forming aids, APEO, solvents, plasticizers andammonia.PLEXTOL B 500 is a pure acrylic with an excellent shear and electrolyte stability. It is highly recommended for silicone paints and artist paints. It shows high flexibility and UV-resistance.
PLEXTOL™ BV 411 PA PLEXTOL BV 411 is an aqueous emulsion of a self-crosslinking acrylic polymer.
PLEXTOL™ D 237 PA PLEXTOL D 237 is an aqueous emulsion of a thermoplastic acrylic polymer.
PLEXTOL™ D 2610 PA PLEXTOL D 2610 is an aqueous dispersion of an acrylic copolymer. PLEXTOL D 2610 dispersion is designed for various types of paints, on a wide range of pigment volume concentration (% PVC), from varnish to matt paints.
PLEXTOL™ D 268 PA PLEXTOL D 268 an aqueous acrylic emulsion for PSA applications.
PLEXTOL™ D 324 PA PLEXTOL D 324 is an aqueous, high solids dispersion of an acrylic ester copolymer. The dispersion contains an anionic/nonionic emulsifier system and is free from film forming aids, solvents and plasticizers.
PLEXTOL™ D 335 PA PLEXTOL D 335 is a high solids aqueous dispersion of a modified acrylic copolymer. The dispersion contains an anionic, APEO free emulsifier system and is free from film forming aids, solvents and plasticizers.
PLEXTOL™ D 487 PA Finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, solvents, and plasticizers.PLEXTOL D 487 is a low MFFT self-crosslinking pure acrylic with excellent adhesion on different substrates. It is highly recommended as multi-substrate binder and for universal renovation paints ("house-paints").
PLEXTOL™ D 498 PA Finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, solvents and plasticizers.PLEXTOL D 498 is a low MFFT pure acrylic recommended for saponification resistant exterior masonry coatings and renders. It is highly suitable for silicate coatings and renders and shows non-yellowing and excellent UV resistance.
PLEXTOL™ D 507 PA Finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, solvents, plasticizers and ammonia.PLEXTOL D 507 is a pure acrylic recommended for industrial concrete-roof tile coatings. It shows excellent exterior durability and very high resistance against water-whitening and efflorescence.
PLEXTOL™ D 509 PA PLEXTOL D 509 is a ready-for-use finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. The dispersion contains an anionic/nonionic emulsifier system and is free from film forming aids, solvents and plasticizers.
PLEXTOL™ D 512 PA Finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. The dispersion contains an anionic emulsifier system and is free from APEOs, film forming aids, solvents and plasticizers.PLEXTOL D 512 is a pure acrylic binder with excellent exterior durability and water-whitening resistance. It shows a good blocking and dirt-pick up resistance. It is recommended for high quality masonry paints including mosaic plasters. It is as well suitable for concrete roof-tile renovation paints.
PLEXTOL™ D 5241 PA PLEXTOL D 5241 is an aqueous, high solids dispersion of an acrylic ester copolymer. The dispersion contains an APEO free anionic/nonionic emulsifier system and is free from film forming aids, solvents and plasticizers.
PLEXTOL™ D 904 PA Plextol D 904 is a water-based dispersion based on acrylic and methacrylic acid esters.Plextol D 904 is mostly advised to formulate Facade coatings with very good water and UV resistance. It can also be used to formulate Interior paints and Primers for walls.
PLEXTOL™ D 977 PA Plextol  D 977 is a water-based dispersion of acrylic copolymer designed for Elastomeric coatings, roof and walls.It provides a good balance between mechanical properties and dirt pick-up resistance thanks to the adjusted internal plastification and UV surface curing system.
PLEXTOL™ DS 155 PA PLEXTOL DS 155 is an low VOC aqueous emulsion of a thermoplastic acrylic polymer.
PLEXTOL™ DV 245 PA PLEXTOL DV 245 is an aqueous emulsion of a self-crosslinking acrylic polymer.
PLEXTOL™ DV 455 PA PLEXTOL DV 455 is an aqueous emulsion of a self-crosslinking acrylic polymer.
PLEXTOL™ DV 544 PA PLEXTOL DV 544 is an aqueous emulsion of a crosslinkable acrylic polymer.
PLEXTOL™ DV 585 PA PLEXTOL DV 585 is an aqueous emulsion of a self-crosslinking acrylic polymer.
PLEXTOL™ E 303 PA PLEXTOL E 303 is an aqueous high solids dispersion of an acrylic ester copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, solvents and plasticizers.
PLEXTOL™ L 4801 PA PLEXTOL L 4801 is an aqueous dispersion of acrylic copolymer for specialty pressure sensitive tapes. It is anionic and APEO free. 
PLEXTOL™ L 4804 PA Aqueous dispersion of acrylic copolymer, anionic, APEO free.
PLEXTOL™ L 4805 PA Aqueous dispersion of acrylic copolymer, anionic, APEO free.
PLEXTOL™ M 625 PA Finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. The dispersion contains an anionic emulsifier system, and is free from APEO, coalescing agents, solvents, and plasticizers.PLEXTOL M 625 is a hard pure acrylic with excellent UV-resistance and exterior durability. It is highly recommended for industrial concrete roof-tile and fibre-cement coatings. It shows an outstanding efflorescence and water-whitening resistance.
PLEXTOL™ PRIME 7501 PA PLEXTOL Prime 7501 is an APEO-free aqueous emulsion of a thermoplastic acrylic polymer.
PLEXTOL™ PRIME 7525 PA PLEXTOL Prime 7525 is an APEO-free aqueous emulsion of a thermoplastic acrylic polymer.
PLEXTOL™ R 100 PA Plextol R 100 is a surfactant stabilised modified - acrylic copolymer dispersion that forms a flexible, tough film of high water resistance.Plextol R 100 is recommended for exterior and interior paints.
PLEXTOL™ R 123 PA PLEXTOL R 123 is an acrylic copolymer dispersion.
PLEXTOL™ R 123 PA Plextol R 123 is an acrylic copolymer dispersion
PLEXTOL™ R 5335 PA PLEXTOL R 5335 is a fine particle size, surfactant stabilised aqueous acrylic copolymer dispersion. PLEXTOL R 5335 offers high gloss, excellent adhesion and high water resistance. PLEXTOL R 5335 is recommended for high performance trim paints and wood stains.
PLEXTOL™ R 5377 PA PLEXTOL R 5377 is a surfactant stabilised acrylic ester copolymer dispersion.
PLEXTOL™ R 5441 PA PLEXTOL R 5441 is a fine particle size, surfactant stabilised aqueous dispersion of a crosslinked methacrylic ester-acrylic ester copolymer. PLEXTOL R 5441 offers high gloss, block resistance, wet ahdesion, alkali and water resitance. PLEXTOL R 5441 is recommended for low-to-medium build wood stains and semigloss to silky matt wet room coatings.
PLEXTOL™ R 5512 PA Plextol R 5512 is a water-based pure acrylic copolymer dispersion mainly recommended for Crack bridging wall paints and highly flexible roof coatings.Plextol R 5512 provides high flexibility and expceptional water, alkali and dirt pick-up resistance.It contributes a good balance between mechanical properties and dirt pick-up resistance thanks to the adjusted internal plastification and UV surface curing system.
PLEXTOL™ R 5530 PA PLEXTOL R 5530 is a fine particle size, surfactant stabilised aqueous dispersion of a crosslinked methacrylic ester-acrylic ester copolymer. PLEXTOL R 5530 offers good adhesion and salt spray resistance with a very good adhesion to different substrates.PLEXTOL R 5530 is recommended for anti-corrosion and Direct to Meta applications with excellent salt spray resistance and perfect adhesion to many substrates. Plextol R 5530 is suitable also for multi-substrate primer formulations.
PLEXTOL™ R 621 PA PLEXTOL R 621 is an aqueous dispersion of an acrylic ester copolymer with pressure sensitive properties.
PLEXTOL™ R 815 PA PLEXTOL R 815 is a fine particle size, surfactant stabilised aqueous dispersion of a methacrylic ester-acrylic ester copolymer. PLEXTOL R 815 offers high gloss, block resistance, wet adhesion, alkali and water resistance. PLEXTOL R 815 is recommended for gloss paints, varnishes and stains.
PLEXTOL™ R 825 D PA PLEXTOL R 825 D is a finely dispersed aqueous acrylic copolymer dispersion. The dispersion contains an anionic emulsifier system and is free from APEO, film forming aids, solvents and plasticizers.PLEXTOL R 825 D is a self-crosslinking multiphase acrylic dispersion. It is highly recommended for gloss and trimpaints. It offers high gloss potential, excellent wet adhesion and good blocking resistance.
PLEXTOL™ R 825 N PA Plextol R 825 N is a finely dispersed aqueous acrylic copolymer dispersion. The dispersion contains an anionic emulsifier system and is free from APEO, film forming aids, solvents and plasticizers. PLEXTOL R 825 N is a self-crosslinking multiphase acrylic dispersion. It is highly recommended for gloss and trimpaints. It offers high gloss potential, excellent wet adhesion and good blocking resistance.
PLEXTOL™ RM 1017 SA PLEXTOL RM 1017 is a surfactant stabilised modified - acrylic copolymer dispersion. The dispersion is free from film forming aids, APEO, solvents and plasticizers.PLEXTOL RM 1017 forms a flexible, tough film of high water resistance. It is recommended for roadmarking paints.
PLEXTOL™ T 70S10 PA Plextol T 70S10 is an aqueous solution based on acrylate copolymer.
PLEXTOL™ T 74K30 SA Plextol® T 74K30 is an aqueous dispersion of a acrylic ester-styrene copolymer. The dispersion was developed for secondary backing, particularly for the two coat process. When this technique is employed the handle of the carpet is mainly influenced by the choice of the dispersion for the precoat. Plextol® T 74K30 also can be used for the one coat process. When this technique is employed the dispersion gives the carpet a medium hard handle.
PLEXTOL™ T 74S20 SA Plextol® T 74S20 is an aqueous emulsion of an acrylic polymer. The dispersion is used e. g. for the finishing of woven carpets. Plextol® T 74S20 gives the textiles a soft handle.
PLEXTOL™ T 74S60 PA PLEXTOL T 74S60 is an aqueous emulsion of a thermoplastic acrylic polymer. PLEXTOL T 74S60 gives the textiles a soft handle.
PLEXTOL™ T 76A20 SA PLEXTOL T 76A20 is an aqueous dispersion of a styrene-acrylic copolymer. PLEXTOL T 76A20 gives the textiles a medium hard handle.
PLEXTOL™ ULTRAFINE LS 5000 PA PLEXTOL ULTRAFINE LS 5000 is an ultra fine particle size, surfactant stabilised aqueous dispersion of a methacrylic ester-acrylic ester and vinyl versatate copolymer with translucent appearance. PLEXTOL ULTRAFINE LS 5000 shows excellent penetration and binding properties especially for surfaces which may be subjected to significant dimensional changes. PLEXTOL ULTRAFINE LS 5000 is recommended for wood stains formulation for interior and exterior application. 
PLEXTOL™ ULTRAFINE PR 3500 PA PLEXTOL UltraFine PR 3500 is an aqueous dispersion of acrylic copolymer with a very fine particle size.
PLEXTOL™ ULTRAFINE PR 3500 PA PLEXTOL UltraFine PR 3500 is an aqueous dispersion of acrylic copolymer with a very fine particle size.
PLEXTOL™ ULTRAGREEN 3852 PA PLEXTOL UltraGreen 3852 is an ammonia-free aqueous dispersion of an acrylic copolymer. PLEXTOL UltraGreen 3852 is designed for formulating environmentally friendly low odour interior and exterior masonry coatings (façade coatings and synthetic resin plasters).
PLEXTOL™ W 1078 PA PLEXTOL W 1078 is a multiphase, self-crosslinking acrylic copolymer dispersion designed for interior use for varnish and stain formulations of parquet and furniture. 
PLEXTOL™ X 4427 PA PLEXTOL X 4427 is an aqueous emulsion of an acrylic-copolymer.
PLIOCORD™ SB 2108 LSSBR Cold-polymerized non-carboxylated SB latex for fiber-to-rubber adhesion for tires and rubber products
PLIOCORD™ VP 106 VPSBR Industry standard latex for fiber-to-rubber adhesion for tires and rubber products.
PLIOCORD™ VP 106S VPSBR Latex for fiber-to-rubber adhesion for tires and rubber products with low-foaming characteristics
PLIOCORD™ VP 107S VPSBR Latex with lower VP level for fiber-to-rubber adhesion for tires and rubber products
PLIOCORD™ VP 4668 VPSBR Latex for fiber-to-rubber adhesion with superior runnability for demanding formulas
PLIOCRYL™ 4526 OTH Pliocryl 4526 is an orthophthalic unsaturated polyester solvent-based resin.Mainly recommended for two-component traffic marking paints, especially pedestrian crossings, parking lots, streets, auxiliary markings.Pliocryl 4526 provides a good balance of flexibility and hardness after curing, as well as weather and abrasion resistances.
PLIOCRYL™ 4600 ACR Pliocryl 4600 is a thermoplastic solvent-based styrene-acrylic copolymer.It provides extremely fast drying, high hardness and good water resistance properties.Mainly recommended for traffic marking and floor paints.
PLIOCRYL™ 4660 ACR Pliocryl 4660 is a thermoplastic solvent-based styrene-acrylic copolymer.It provides fast drying, good mechanical properties and good water resistance.Mainly recommended for swimming pools paints as well as floor and traffic marking paints.
PLIODISP™ 6320 VACO Pliodisp 6320 is a water-based copolymer dispersion based on vinyl acetate and maleic acid dibutyl ester, recommended for manufacturing non-edible cheese crust.Pliodisp 6320 is suitable for the manufacturing of physiologically perfect coatings for food, especially for the manufacturing of coatings for hard cheese.The specific national legislation must be taken into account.
PLIODISP™ 7215 VACO Pliodisp 7215 is a plasticizer-free water-based dispersion based on vinyl acetate and VeoVa (vinyl ester of versatic acid).Pliodisp 7215 is especially suitable for the manufacturing of interior and exterior paints with excellent cost/performance relationship. It may also be used as a binder for the formulation of medium and medium-high PVC paints. Pliodisp 7215 is also appropriate for the manufacturing of semi-gloss paints with good characteristics regarding gloss and blocking resistance.  
PLIODISP™ 7252 VACO Pliodisp 7252 is a plasticizer-free water-based dispersion based on vinyl acetate and VeoVa (vinyl ester of versatic acid).Pliodisp 7252 is especially suitable for the manufacturing of interior and exterior paints with excellent water, saponification and weathering resistance.  It is also appropriate for the manufacturing of semi-gloss paints.
PLIODISP™ 7600 SA Pliodisp 7600 is a water-based styrene acrylic copolymer developed for Elastomeric Wall and Roof coatings.It is also recommended for Texture coatings and Silicate paints.Pliodisp 7600 provides high elongation at break, low water uptake and effective water impermeability.
PLIODISP™ 7602 SA Pliodisp 7602 is a plasticizer-free water-based dispersion based on acrylic acid esters and styrene.Pliodisp 7602 is recommended for the manufacturing of Elastomeric Wall and Roof coatings. It is also suitable to produce Resin-bound plasters,Textured coatings and Silicate paints and Plasters.
PLIODISP™ 7693 SA Pliodisp 7693 is a water-based dispersion based on acrylic acid esters and styrene, APEO and ammonia free.Pliodisp 7693 is a new generation binder specially developed for the formulation of high PVC interior paints. It may also be used to manufacture Exterior paints.
PLIODISP™ 7730 PA Pliodisp 7730 is a water-based dispersion acrylic copolymer modified, internally crosslinked and UV-cured.It is specially dessigned for Elastomeric wall and roof coatings that provides excellent aging behavior and exhibits low water uptake, alkali resistance and high elongation even at very low temperatures.
PLIODISP™ 7744 PA Pliodisp 7744 is a plasticizer-free water-based dispersion based on acrylic and methacrylic acid esters.Pliodisp 7744 is suitable for the manufacturing of high quality exterior paints with excellent weathering resistance and low dirt pick-up.
PLIODISP™ 7776 PA Pliodisp 7776 is a water-based acrylic dispersion for Exterior facade paints as well as for Semi-gloss to High-gloss wall paints.Pliodisp 7776 provides good exterior durability (color retention for deep-shade paints) and snail trail resistance.
PLIODISP™ 7778 PA Pliodisp 7778 is a plasticizer-free water-based dispersion based on acrylic and methacrylic acid esters.Pliodisp 7778 is specially recommended for the formulation of High gloss paints on several types of substrates providing high wet adhesion, outdoor durability and low dirt pick-up.It can be also used for Wood stain, Facade coatings and Semi-gloss paints.
PLIODISP™ 7788 PA Pliodisp 7788 is a plasticizer-free water-based dispersion based on acrylic and methacrylic acid esters.Pliodisp 7788 is recommended for Facade and Wall paints with low VOC emissions. It provides good binding power and exterior durability.
PLIOLAK™ AF 475 ALK Pliolak AF 475 is a Solvent-based medium-oil alkyd resin based on vegetable fatty acids.Pliolak AF 475 is mainly suitable for the manufacturing of fast-drying industrial enamels. Pliolak AF 475 65 % in Xylene is suitable for the manufacturing of enamels finished with xylene.It may also be used in forced-drying enamels (between 60 ºC and 100 ºC) as sole binder or in combination with melamine resins.The resin contains 47% oil and 27% phthalic anhydrid.Delivery form : (1) 55% in White Spirit/Xylene or (2) 65% in Xylene
PLIOLAK™ AF 522 ALK Pliolak AF 522 is a Solvent-based medium-oil alkyd resin for decorative coatings, industrial primers and enamelsThe resin contains 52% oil and 28% phthalic anhydrid.Delivery form 60% in D40
PLIOLAK™ AF 642 ALK Pliolak AF 642 is a Sovent-based long-oil drying alkyd resin based on vegetable fatty acids.Pliolak AF 642 is used as sole binder or in combination with other alkyd resins for the formulation of decorative enamels and varnishes.Pliolak AF 642 is also suitable for the production of metal and wood primers and anti-corrosion paints.The 100% resin contains 64% oil and 24 % Phthalic Anhydride  Delivery form 60 % in Dearomatized White Spirit
PLIOLAK™ AF 654 E ALK Pliolak AF 654E is a Solvent-based long-oil drying alkyd resin based on vegetable fatty acids.Pliolak AF 654E is recommended as sole binder or in combination with other alkyd resins for the formulation of decorative enamels and varnishes.It can also be used for the production of primers and anti-corrosion paints.The resin contains 65% Oil and 26% Phthalic Anhydride  Delivery form 70 % in White Spirit
PLIOLAK™ AF 704 ALK Pliolak AF 704  is a High solids, Sovent-based long-oil alkyd resin recommended for decorative coatings.The resin contains 70% oil Delivery form 85% in D40.
PLIOLAK™ AH 832 ALK Pliolak AH 832 is a Solvent-based long-oil alkyd resin for decorative enamels and varnishes.The resin contains 83% oil .100% solids.
PLIOLAK™ AM 342 ALK Pliolak AM 342 is a Solvent-based short-oil alkyd resin, phenolic and rosin modified for industrial primers and colorful enamels, as well as hammer finishes.Pliolak AM 342 provides fast drying, high hardness, good metal adhesion and chemical resistance.Delivery form 50 % in Xylene
PLIOLAK™ AS 245 ALK Pliolak AS 245 is a Solvent-based short-oil drying alkyd resin based on soya-bean oil.Pliolak AS 245 is specially recommended for the formulation of fast drying enamels, as well as bitumens and anticorrosive primers. It may also be used as plasticizer in combination with melamine resins for stoving enamels as well as with nitrocellulose and also for acid curing lacquers.Pliolak AS 245 is suitable for the formulation of two components clear topcoats for wood furniture, in combination with isocyanates.The 100% resin contains 24 % Oil and 39 % Phthalic Anhydride  Delivery form 60 % in Xylene
PLIOLAK™ AS 284 ALK Pliolak AS 284 is a Solvent-based short-oil alkyd resin mainly recommended for industrial enamels, anti-corrosive primers, lacquers and clear topcoats for wood.The resin contains 22% oil and 40% phthalic anhydrid.Delivery form 60% in Xylene
PLIOLAK™ AS 622 ALK Pliolak AS 622 is a Sovent-base long-oil drying alkyd resin based on sunflower oil.Pliolak AS 622 is recommended as a sole binder or in combination with high solids long-oil alkyd resins for the formulation of decorative enamels and varnishes that fulfill the VOC’s (Volatile Organic Compounds) emissions limits defined in the Directive 42/2004/CE.Pliolak AS 622 is especially suitable for the formulation of white enamels.The 100 % resin contains 62 % Oil and 25 % Phthalic Anhydride  Delivery form 75 % in Dearomatized White Spirit
PLIOLAK™ AS 652 ALK Pliolak AS 652 is a Solvent-based long-oil alkyd resin that provides good drying time, wrinkling resistance and weathering resistance, with good gloss and color retention.Pliolak AS 652 is used for decorative coatings, including interior and exterior applications.The 100% resin contains 65% oil and 23 % Phthalic Anhydride  Delivery form 75 % in Dearomatized White Spirit
PLIOLAK™ AU 520 ALK Pliolak AU 520 is a Solvent-based medium-oil urethane alkyd resin for metal paints.Pliolak AU 520 provides good anti-corrosive properties and adhesion when properly formulated and applied with an appropriate dry film thickness. Use in combination with a long-oil alkyd resin to improve flexibility.The 100% resin contains 52% oil and 18 % Phthalic Anhydride  Delivery form 60 % in solvent D40
PLIOLAK™ AU 620 ALK Pliolak AU 620 is a Solvent-based long-oil urethane alkyd resin for decorative and marine coatings.Pliolak AU 620 provides improved drying time and hardness as well as high resistance to abrasion and saponification.The 100% resin contains 62% oil and 12 % Phthalic Anhydride  Delivery form 60 % in solvent D40
PLIOLAK™ AV 303 ALK Pliolak AV 303 is a Solvent-based short-oil modified alkyd resin for industrial enamels.Pliolak AV 303 provides extremely fast drying even in unfavorable climatic conditions.  The 100% resin contains 30% oil.  Delivery form 60 % in Xylene.
PLIOLITE® AC4 OTH Pliolite AC4 is a styrene-acrylate copolymer, often used in combination with Pliolite AC80, to form tough abrasion and chemically resistant films that have excellent UV resistance and exterior weathering properties.Solvent based thixotropic resin for low to high textured exterior masonry coatings, primers, anti-corrosion coatings, concrete protection and intumescent coatings.
PLIOLITE® AC5-G OTH Pliolite AC5G is a styrene-acrylate copolymer, often used in combination with Pliolite AC80, to form tough abrasion and chemically resistant films that have excellent UV resistance and exterior weathering properties.Solvent based pseudoplastic resin for low to high build exterior masonry coatings, primers, anti-corrosion coatings, concrete protection and intumescent coatings.
PLIOLITE® AC80 OTH Pliolite AC80, often used in combination with Pliolite AC4 or Pliolite AC5G,  forms though abrasion and chemically resistant films that have excellent adhesion, UV resistance and exterior weathering properties.Newtonian resin for exterior masonry coatings, anticarbonation, metal protective and intumescent coatings.
PLIOLITE® AC90 OTH Pliolite AC90 styrene-acrylate copolymer provides excellent water resistence and durability. Its melt rheology and synergy with other intumescent raw materials delivers outstanding char consistency and fire resistance.Newtonian resin for high performance intumescent coatings.
PLIOLITE® LV72 OTH Pliolite LV 72 is a low viscosity styrene-acrylate copolymer with high pigment binding properties that forms tough, abrasion and alkali resistant films with excellent adhesion to concrete and steel, and with very good water and chemical resistance.Newtonian resin giving low viscosity solutions, with very good sprayability, for formulation of swimming pool paints and as a replacement for chlorinated rubber.
PLIOLITE® S5E OTH Pliolite S5E is a styrene-acrylate copolymer that forms tough, abrasion resistant films with excellent chemical, water and alkali resistance.Newtonian resin for water proofing sealers, masonry primers, concrete curing membranes and road marking paints.
PLIOLITE® S6H SB-Dry High styrene butadiene resin with a typical styrene/butadiene ratio of 82.5 / 17.5
PLIOLITE® VTAC-L OTH Pliolite VTAC-L is a highly soluble, vinyl toluene-acrylate copolymer that forms tough, durable films with excellent adhesion to concrete and steel, with very good water and chemical resistance.Newtonian resin soluble in mineral spirits, for formulation of flat or textured masonry coatings, alkali resistant primers, anticorrosion paints and intumescent coatings.
PLIOTEC® 7104E SA Pliotec 7104E is high Tg styrene acrylic latex that provides excellent adhesion to concrete and resistance to chemicals. It allows formulation of floor coatings that exhibits superior resistance to abrasion and hot tire pick-up.Pliotec 7104E can be used to formulate garage floor coatings, masonry primers and waterproofing sealers.
PLIOTEC® CR78 SA Pliotec CR78 self-crosslinking styrene acrylic latex provides excellent chemical resistance, and superior hot-tire pick-up resistance, suitable for low VOC garage floor paints.Water-based styrene acrylic resin for garage floor paints and institutional wall coverings.
PLIOTEC® CS24 PA Pliotec CS24 is a water-based modified acrylic and adipic acid dihydrazide-free binder recommended for High gloss wood trim paints.It provides excellent blocking and cracking resistance with high gloss capability.
PLIOTEC® EL25 PA Pliotec EL25 acrylic elastomeric latex provides excellent tensile/elongation properties, superior dirt pick-up resistance, great adhesion to concrete und UV resistance.Water-based elastomeric resin for vertical masonry coatings, roofing and tilt up coatings.
PLIOTEC™ HDT12 SA Modified styrene-acrylic copolymer latex based on Hydrophobic Dispersion Technology, with excellent adhesion to metals, and superior water resistance, delivering corrosion protection even without the use of anticorrosive pigments.Pliotec HDT12 is recommended for Direct-To-Metal (DTM) coatings, from high gloss enamels to anticorrosive primers.
PLIOTEC® HDT16 SA Pliotec HDT16 modified styrene-acrylic copolymer latex provides excellent water and corrosion resistance, fast hardness development and superior adhesion to a wide variety of substrates (ferrous and non-ferrous metals, ceramic tiles, PVC and more).Water-based resin for anti-corrosion paints and primers, Direct-To-Metal (DTM) coatings and multi-surface renovation paints.
PLIOTEC® LEB18 SA Pliotec LEB18 is unique modified styrene-acrylic copolymer latex that ensures superior resistance to exudation (surfactant leaching) and efflorescence, with balanced dirt pick-up resistance and crack bridging ability. Thanks to its stabilisation system, Pliotec LEB 18 demonstates enhanced early rain resistance.Water-based resin for flat or high build masonry paints, topcoats for EIFS and house plinths, all-weather paints.
PLIOTEC® LEB20 PA Pliotec LEB20 is pure acrylic copolymer that ensures superior resistance to exudation (surfactant leaching) and efflorescence, with excellent color retention, strong early rain resistance, and superior dirt pick-up resistance.Unique water-based resin for exterior masonry paints, topcoats for EIFS and house plinths, all-weather paints.
PLIOTEC® PA05 PA Pliotec PA05 pure acrylic latex with high Tg provides excellent resistance to water, UV and chemicals, very good adhesion to concrete, and hot-tire pick-up resistance.Water-based resin for high performance coatings, concrete sealers and interior/exterior floor paints.
PLIOTEC® PA90MT PA Pliotec PA90MT is pure acrylic copolymer that provides excellent water and blush resistance, very good weathering and UV resistance, and low coalescing demand.Pliotec PA90MT is designed for formulation of water-based high performance coatings, concrete stains, and for vertical or horizontal architectural paints.
PLIOTEC® SA40 SA Pliotec SA40 is styrene acrylic copolymer that provides excellent adhesion to concrete and outstanding resistance to alkali and efflorescence.Pliotec SA40 is designed to formulate water-based waterproofing sealers, masonry primers, and concrete cure-and-seal products.
PLIOTEC® SC203 PA Self-crosslinking all-acrylic latex, imparting excellent blush resistance and adhesion to multiple substrates including concrete and tile. It forms a durable film with good hot tire pick-up resistance. Pliotec SC203 is recommended for clear concrete sealers and floor coatings. It can be formulated into <50 g/L VOC coatings.
PLIOWAY® EC1 OTH Plioway EC1 is a vinyl-acrylate copolymer soluble in low odour, dearomatized aliphatic solvents. It provides excellent adhesion on a wide variety of substrates, as well as outstanding stain blocking properties.Newtonian resin for low odour, stain blocking primers, waterproofing sealers, correction fluids and intumescent coatings. 
PLIOWAY® ECT OTH Plioway ECT is a  partially crosslinked, vinyl-acrylate copolymer, soluble in low odour, dearomatized aliphatic solvents, mainly used in combination with Plioway EC1, eliminating the need for external thickeners which can often be detrimental to film performance.Rheological resin for formulation of low odour stain blocking primers, water proofing sealers, correction fluids and intumescent coatings.
PLIOWAY™ ULTRA 200 OTH Plioway Ultra 200 is a vinyl-acrylate copolymer soluble in odourless isoparaffinic solvents, that forms non-yellowing, tough coatings with excellent adhesion and stain blocking properties.Highly soluble Newtonian resin for formulation of odourless stain blocking primers, basement water proofing sealers, correction fluids and intumecent coatings.
PLIOWAY® ULTRA 350LV OTH Plioway Ultra 350LV is a vinyl-acrylate copolymer, soluble in odourless isoparaffinic solvents, that form tough, non-yellowing with excellent adhesion and stain blocking properties.Low viscosity Newtonian resin for formulation of odourless stain blocking primers, basement water proofing sealers, correction fluids, and intumescent coatings.
PLIOWAY® ULTRA G20 OTH Plioway Ultra G20 is a vinyl-acrylate copolymer, soluble in odourless  isoparaffinic solvents and used in combination with Plioway Ultra 200 or Ultra 350LV, eliminating the need for external thickeners which can often be detrimental to film performance.Pseudoplastic rheological resin for formulation of odourless stain blocking primers, basement water proofing sealers, correction fluids and intumescent coatings.
POLYFOX™ PF-136A OTH Anionic fluorinated (CF3) polyether diammonium sulfate for aqueous formulationsPolyFox PF-136A wetting, flow and leveling agent is suitable for use in a wide variety of aqueous coating, floor finish, and ink applications.
POLYFOX™ PF-151N OTH 50 % active Nonionic fluorinated (C2F5) polyether ethoxylatedPolyFox PF-151N wetting, flow and leveling agent is suitable for use in a wide variety of aqueous coating, ink, and electronics applications.
POLYFOX™ PF-154N OTH 25 % active Nonionic fluorinated (C2F5) polyether ethoxylatedPolyFox PF-154N wetting, flow and leveling agent is suitable for use in a wide variety of aqueous coating, ink, and electronics applications.
POLYFOX™ PF-156A OTH Anionic fluorinated (C2F5) polyether diammonium disulfate for aqueous formulations.PolyFox PF-156A wetting, flow and leveling agent is suitable for use in a wide variety of aqueous coating, floor finish, and ink applications.
POLYFOX™ PF-159 OTH 100 % active Nonionic fluorinated (C2F5) polyether ethoxylatedPolyFox PF-159 highly efficient wetting, flow and leveling agent is suitable for use in a broad variety of aqueous, solvent, 100% solid coating, ink, and adhesive applications.
POLYFOX™ PF-6320 OTH Solvent soluble diol functional fluorinated (CF3) polyether diol terminated PolyFox PF-6320 wetting, flow and levelig agent or reactive intermediate is suitable  for solvent based industrial and maintenance coatings, adhesives, electronics, and lubricants.
POLYFOX™ PF-636 OTH Solvent soluble diol functional fluorinated (CF3) polyether diol terminatedPolyFox PF-636 wetting, flow and leveling agent or reactive intermediate is suitable  for solvent based industrial and maintenance coatings, adhesives, electronics, and lubricants.
POLYFOX™ PF-652-NF OTH 50% active solvent soluble fluorinated (C2F5) ethoxylate A-B-A tri-block copolymerPolyFox PF-652-NF wetting, flow and leveling agent or reactive intermediate is suitable  for solvent based industrial and maintenance coatings, adhesives, and litho plate coatings.
POLYFOX™ PF-6520 OTH Solvent soluble diol functional fluorinated (C2F5) polyether diol terminatedPolyFox PF-6520 wetting, flow and leveling agent or reactive intermediate is suitable  for solvent based industrial and maintenance coatings, adhesives, electronics, and lubricants.
POLYFOX™ PF-656 OTH Solvent soluble diol functional fluorinated (C2F5) polyether diol terminatedPolyFox PF-656 wetting, flow and leveling agent or reactive intermediate is suitable  for solvent based industrial and maintenance coatings, adhesives, electronics, and lubricants.
RESIPUR™ 2100 OTH Resipur 2100 is an orthophthalic unsaturated polyester resin of high reactivity.Resipur 2100 is supplied as a transparent slightly yellow liquid that is free of impurities.DELIVERY FORM: Approx. 60 % of polymer diluted in styrene.
RESIPUR™ 2138 OTH Resipur 2138 is an orthophthalic unsaturated polyester resin of high reactivity.Resipur 2138 is a transparent light yellow liquid that is free of impurities.DELIVERY FORM: Approx. 64 % of polymer diluted in styrene.
RESIPUR™ 2208 OTH Resipur 2208 is an orthophthalic unsaturated polyester resin of high reactivity.  Resipur 2208 is a transparent slightly yellow liquid that is free of impurities. DELIVERY FORM: Approx. 68 % of polymer diluted in styrene.
RESIPUR™ 4246 OTH Resipur 4246 is an isophthalic/NPG unsaturated polyester resin of low reactivity.  Resipur 4246 is a violet liquid that is free of impurities. DELIVERY FORM: Approx. 68 % of polymer diluted in styrene and acrylic Monomers. 
RESIPUR™ 5103 OTH Resipur 5103 is an isophthalic unsaturated polyester resin of medium reactivity. Resipur 5103 is a transparent yellow liquid that is free of impurities. Resipur 5103 has high chemical resistance. Resipur 5103 is used in laminate surfaces that have contact with food.  DELIVERY FORM: Approx. 62 % of polymer diluted in styrene.
RESIPUR™ 5166 OTH Resipur 5166 is an isophthalic unsaturated polyester resin of high reactivity, pre-accelerated and thixotropic.Resipur 5166 is an opaque pink liquid that is free of impurities.Resipur 5166 is certified for naval construction by Lloyd’s Register.DELIVERY FORM: RESIPUR 5166: Approx. 54 % of polymer diluted in styrene.
RESIPUR™ 5169 OTH Resipur 5169 is an isophthalic unsaturated polyester resin of high reactivity, pre-accelerated and thixotropic.Resipur 5169 is an opaque pink liquid that is free of impurities.Resipur 5169 is certified for naval construction by Lloyd’s Register.DELIVERY FORM: RESIPUR 5169: Approx. 55 % of polymer diluted in styrene.
RESIPUR™ 6560 OTH Resipur 6560 is an orthophthalic unsaturated polyester resin, pre-accelerated and thixotropic.Resipur 6560 is an opaque pink liquid, free of impurities. DELIVERY FORM: Approx. 58 % of polymer diluted in styrene.
RESIPUR™ 9107 OTH Resipur 9107 is an orthophthalic unsaturated polyester resin of medium reactivity.Resipur 9107 is a transparent yellow liquid, free of impurities.Resipur 9107 is used in laminate surfaces that have contact with food. DELIVERY FORM: Approx. 66 % of polymer diluted in styrene.
RESIPUR™ 9112 OTH Resipur 9112 is an orthophthalic unsaturated polyester resin of medium reactivity.Resipur 9112 is a clear blue liquid, free of impurities.Resipur 9112 has high stability to UV radiation. DELIVERY FORM: Approx. 62 % of polymer diluted in styrene.
RESIPUR™ 9166 OTH Resipur 9166 is an orthophthalic unsaturated polyester resin of medium reactivity, pre-accelerated and thixotropic.Resipur 9166 is an opaque pink liquid, free of impurities.Resipur 9166 is certified for naval construction by Lloyd’s Register.DELIVERY FORM: RESIPUR 9166: Approx. 59 % of polymer diluted in styrene.
RESIPUR™ 9168 OTH Resipur 9168 is an orthophthalic unsaturated polyester resin of medium reactivity, pre-accelerated and thixotropic.Resipur 9168 is an opaque pink liquid, free of impurities.Resipur 9168 is certified for naval construction by Lloyd’s Register.DELIVERY FORM: RESIPUR 9168: Approx. 58 % of polymer diluted in styrene.
RESIPUR™ 9175 OTH Resipur 9175 is an orthophthalic unsaturated polyester resin of medium reactivity, pre-accelerated and thixotropic.Resipur 9175 is an opaque blue liquid, free of impurities.Resipur 9175 contains a peroxide indicator.  DELIVERY FORM: RESIPUR 9175: Approx. 58 % of polymer diluted in styrene.
RESIPUR™ 9189 OTH Resipur 9189 is an orthophthalic unsaturated polyester resin of medium reactivity, pre-accelerated and thixotropic.Resipur 9189 is supplied as an opaque pink liquid that is free of impurities.Resipur 9189 emits low amounts of styrene during the curing process. As such Resipur 9189 has an improved environmental profile.DELIVERY FORM: RESIPUR 9189 Approx. 59 % of polymer diluted in styrene.
RESIPUR™ 9312 OTH Resipur 9312 is an orthophthalic unsaturated polyester resin with medium reactivity.Resipur 9312 is a brilliant yellow liquid, free of impurities.DELIVERY FORM: Approx. 72 % of polymer diluted in styrene.
RESIPUR™ 9318 OTH Resipur 9318 is an orthophthalic unsaturated polyester resin with medium reactivity.Resipur 9318 is a transparent liquid, free of impurities. DELIVERY FORM: Approx. 68 % of polymer diluted in styrene.
RESIPUR™ 9350 OTH Resipur 9350 is an orthophthalic unsaturated polyester resin with medium reactivity and thixotropic.Resipur 9350 is an opaque yellow to slightly green liquid, free of impurities. DELIVERY FORM: Approx.70 % of polymer diluted in styrene.
RESIPUR™ 9801 OTH Resipur 9801 is an orthophthalic unsaturated polyester resin with medium reactivity.Resipur 9801 is a transparent yellow liquid, free of impurities.Resipur 9801 has high stability to UV radiation.Resipur 9801 is used in cultured marble surfaces that have contact with food. DELIVERY FORM: Approx. 66 % of polymer diluted in styrene.
RESIPUR™ 9805 OTH Resipur 9805 is an orthophthalic unsaturated polyester resin with low reactivity which contains paraffin.Resipur 9805 is a transparent yellow liquid, free of impurities.DELIVERY FORM: RESIPUR 9805: Approx. 65 % of polymer diluted in styrene.
RESIPUR™ 9806 OTH Resipur 9806 is an orthophthalic unsaturated polyester resin with low reactivity which contains paraffin.Resipur 9806 is a transparent yellow liquid, free of impurities.DELIVERY FORM: RESIPUR 9806: Approx. 68 % of polymer diluted in styrene.
RESIPUR™ 9834 OTH Resipur 9834 is an orthophthalic unsaturated polyester resin of medium reactivity.Resipur 9834 is a transparent yellow liquid, free of impurities.Resipur 9834 has high stability to UV radiation.DELIVERY FORM: Approx. 67 % of polymer diluted in styrene.
RESIPUR™ 9844 OTH Resipur 9844 is an orthophthalic unsaturated polyester resin with low reactivity and pre-accelerated and with low viscosity.Resipur 9844 is a transparent pink liquid, free of impurities. DELIVERY FORM: Approx. 61.5 % of polymer diluted in styrene.
REVACRYL™ AE 2091 JA SA REVACRYL AE 2091 JA (former LIPATON XA 491) is a high solids aqueous dispersion of a acrylic ester-styrene copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, solvents, plasticizers, and ammonia.
REVACRYL™ AE 3020 SA REVACRYL AE 3020 is an aqueous dispersion of an acrylic ester-styrene copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, APEO, solvents and plasticizers.REVACRYL AE 3020 is a low MFFT silane-modified styrene-acrylic with excellent wet adhesion and water-resistance. It shows high flexibility and is recommended for roof-coatings. 
REVACRYL™ AE 3020 SA REVACRYL AE 3020 is a finely dispersed, aqueous dispersion of an acrylic ester-styrene copolymer designed for construction applications including waterproofing and ceramic tile adhesives. The dispersion contains an anionic emulsifier system and is free from film forming aids, solvents and plasticizers.
REVACRYL™ AE 3723 SA Finely dispersed, aqueous dispersion of a acrylic ester-styrene copolymer. The dispersion contains an anionic emulsifier system, is free from film forming aids, APEO, solvents, plasticizers and ammonia.REVACRYL AE 3723 is a low MFFT styrene-acrylic dispersion with very low VOC content (< 300 ppm) and low residual monomer content. It is highly recommended for interior and exterior wallpaints, especially low emission and ecolabel compliant products. It shows a good exterior durability and high saponification resistance.
REVACRYL™ AE 3723 SA REVACRYL AE 3723 is a finely dispersed, aqueous dispersion of an acrylic ester-styrene copolymer for construction applications including tile adhesives. REVACRYL AE 3723  contains an anionic emulsifier system and is free from film forming aids, APEO, solvents, plasticizers and ammonia. It has a very low VOC content (< 300 ppm) and is highly recommended for ecolabel compliant products. 
REVACRYL™ AE 3737 SA Finely dispersed, aqueous dispersion of an acrylic ester-styrene copolymer. The dispersion contains an anionic emulsifier system, is free from film forming aids, APEO, solvents, plasticizers, and ammonia.REVACRYL AE 3737 is a low MFFT styrene-acrylic dispersion with high water-resistance, excellent wet adhesion and good flexibility. It is highly recommended for ETICS-primers and renders.
REVACRYL™ AE 3737 SA REVACRYL AE 3737 is a finely dispersed, aqueous dispersion of an acrylic ester-styrene copolymer designed for construction applications including waterproofing and ceramic tile adhesives.The dispersion contains an anionic emulsifier system and is free from film forming aids, solvents, plasticizers and ammonia.
REVACRYL™ AE 3820 SA Finely dispersed, aqueous dispersion of a acrylic ester-styrene copolymer. The dispersion contains an anionic emulsifier system, is free from film forming aids, APEO, solvents, plasticizers and ammonia.REVACRYL AE 3820 is a low MFFT styrene-acrylic dispersion. It is highly recommended for interior and exterior wallpaints. It shows a good scrub-resistance and exterior durability. It is suitable for silicone paints and renders.
REVACRYL™ AE 4522 SA REVACRYL AE 4522 is a standard MFFT modified styrene-acrylic dispersion. It shows excellent wet adhesion and high water- and blocking resistance.REVACRYL AE 4522 is highly recommended for adhesion primers on ETICS and mineral substrates. 
REVACRYL™ AE 4522 SA REVACRYL AE 4522 is a specially modified, aqueous dispersion of a styrene-acrylic ester copolymer for waterproofing and tile adhesive applications. The polymer is engineered for excellent wet adhesion.REVACRYL AE 4522 contains an anionic emulsifier system and is free from film forming aids, solvents and plasticizers.
REVACRYL™ AE 4530 SA REVACRYL AE 4530 is a specially modified, aqueous dispersion of a styrene-acrylic ester copolymer intended to achieve good wet adhesion. The dispersion contains an anionic emulsifier system and is free from film forming aids, solvents, plasticizers, and ammonia.
REVACRYL™ AE 4625 SA Finely dispersed, aqueous dispersion of an acrylic ester-styrene copolymer. The dispersion contains an anionic emulsifier system, is free from film forming aids, APEO, solvents, plasticizers and ammonia.REVACRYL AE 4625 is a standard MFFT styrene-acrylic dispersion. It shows good exterior durability and very good blocking- and water-resistance. It is highly recommended for exterior wallpaints. Due to high saponification resistance it is suitable for silicate paints.
REVACRYL™ AE 4625 SA REVACRYL AE 4625 is a finely dispersed, aqueous dispersion of a styrene-acrylic ester copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, solvents, plasticizers and ammonia.
REVACRYL™ AE 4625 SA REVACRYL AE 4625 is a standard MFFT styrene-acrylic dispersion. It shows good exterior durability and very good blocking- and water-resistance. It is highly recommended for the formulation general purpose construction sealants.
REVACRYL™ AE 6030 SA Finely dispersed aqueous dispersion of a styrene-acrylic ester copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, APEO, solvents and plasticizers.REVACRYL AE 6030 is a hydrophobic styrene-acrylic dispersion. It shows an excellent adhesion to various metal substrate and a high water-resistance. It is highly recommended for anti-corrosive primers and non-decorative metal monocoats.
REVACRYL™ AG 203 SA REVACRYL AG 203 is an anionic stabilised aqueous dispersion of a styrene acrylic copolymer, suitable for agricultural applications.
REVACRYL™ AG 204 SA REVACRYL AG 204 is an ammonia free aqueous dispersion of a styrene-acrylic copolymer that is suitable for agricultural applications.
REVACRYL™ DESIGN 1425 SA REVACRYL Design 1425 is a finely dispersed, aqueous dispersion of an acrylic ester-styrene copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, solvents and plasticizers.
REVACRYL™ DESIGN 1690 SA REVACRYL Design 1690 is a finely dispersed, aqueous dispersion of an acrylic ester-styrene copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, solvents and plasticizers.
REVACRYL™ DS 2100 SA Revacryl DS 2100 is an ammonia free, water-based dispersion of a styrene-acrylic copolymer. It can be used in a broad range of coating applications with well-balanced performance envelope.It's suitable for formulation of indoor mat, silk and semi-gloss paints and Masonry facade paints, with or without silicone emulsion.
REVACRYL™ L 3752 SA REVACRYL L 3752 is an APEO-free, anionic, aqueous styrene-acrylic copolymer dispersion.
REVACRYL™ L 3783 SA REVACRYL L 3783 is an anionic stabilised aqueous dispersion of a styrene-acrylic copolymer. REVACRYL L 3783 is suitable for a wide range of interior and exterior wall applications.
REVACRYL™ L 3790 SA Revacryl L 3790 is an ammonia free, water-based dispersion of styrene-acrylic copolymer, suitable for a wide range of interior and exterior coating applications.The very high binding power and good resistance to water, saponification, alkaline and weathering of Revacryl L 3790 make it a multipurpose product. 
REVACRYL™ L 8761 SA REVACRYL L 8761 is a anionic acrylic ester and styrene copolymer for various construction applications like ceramic tile adhesives.
REVACRYL™ R 245 SA REVACRYL R 245 is a fine particle size, surfactant stabilised aqueous dispersion of a styrene and methacrylic ester-acrylic ester copolymer. REVACRYL R 245 offers excellent alkali resistance and water resistance with very high pigment binding characteristics. REVACRYL R 245 is recommended for high quality interior and exterior paints. REVACRYL R 245 is also suitable in the following applications: - Ready mixed fillers and ceramic tile adhesives - Cartridge applied Caulks/sealants and building adhesives.
REVACRYL™ R 387 SA REVACRYL R 387 is a surfactant stabilised, acrylic/styrene copolymer dispersion. REVACRYL R 387 is free from APEO.
REVACRYL™ R 478 SA REVACRYL R 478 is a styrene acrylic copolymer dispersion containing antifoam.
REVACRYL™ RM 4550 SA REVACRYL RM 4550 is a specially modified, aqueous dispersion of a styrene-acrylic ester copolymer. The dispersion is free from film forming aids, APEO, solvents and plasticizers. REVACRYL RM 4550 shows excellent adhesion on mineral substrates and water-resistance. It is highly recommended for road marking paints.
REVACRYL™ SV 505 SA REVACRYL SV 505 is an aqueous emulsion of a self-crosslinking acrylic polymer.
REVACRYL™ UG 1876 SA Ammonia free anionic stabilised aqueous dispersion of a styrene-acrylic copolymer. The dispersion is free from film forming aids, APEO, solvents and plasticizers. REVACRYL UG 1876 is low MFFT, low odour styrene-acryyl dispersion. It is designed to function especially in high pH biocide free coating formulations and is extremely stable with silicates. It shows an excellent water-resistance and high scrub resistance.
REVACRYL™ ULTRAFINE 4210 SA REVACRYL UltraFine 4210 is a fine particle sized aqueous dispersion of a styrene acrylic copolymer. It is suitable for both interior and exterior applications where its ability to penetrate makes it an excellent vehicle for the deep priming of substrates.
REVACRYL™ ULTRAFINE 4210 SA REVACRYL UltraFine 4210 is a fine particle sized aqueous dispersion of a styrene-acrylic copolymer recommended for mortar and waterproofing applications.
REVACRYL™ ULTRAGREEN 1647 SA REVACRYL UltraGreen 1647 is a finely dispersed, aqueous dispersion of an acrylic ester-styrene copolymer. The dispersion contains an anionic emulsifier system, is free from film forming aids, solvents, plasticizers and ammonia.
REVACRYL™ X 9045 SA REVACRYL X 9045 is preserved against bacterial and fungal attack. In the manufacture of finished products, the material has to be retreated, as usual, with suitable biocides to give enhanced preservation.
REVACRYL™ XA 2406 SA REVACRYL XA 2406 is a finely dispersed, aqueous dispersion of an acrylic ester-styrene copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, solvents and plasticizers.
ROHAGIT™ SD 15 PA Finely dispersed aqueous dispersion of a thermoplastic methacrylic acid-acrylic ester copolymer, anionic stabilised. The dispersion is free from APEO, film forming aids, solvents and plasticizers.ROHAGIT SD 15 is a pure acrylic universal ASE-thickener for pH-range > 8.0. It is UV stable and shows an excellent efficacy and is easy to incorporate. The consistency is pasty, not thready.
ROHAGIT™ SD 9523 XSBR Rohagit SD 9523 is an anionic water based dispersion of a butadiene acrylate copolymer.
SEQUAPEL™ 409 OTH Hydrophobic acrylate copolymer for the formulation of waterproof coatings and binders
SUNBOND™ 140N VA Soft and compatible binder for disposable nonwovens, such as hygiene, wipes, and medical apparel
SUNBOND™ 939 PVAC Carboxylated PVAc Homopolymer
SUNCRYL™ EU 127 VACO Hydrophobic non-silicone release polymer for paper
SUNCRYL™ HP 114 PA Hydrophobic non-silicone release polymer for film, paper and foil
SUNCRYL™ HP 98 VACO Hydrophobic non-silicone release polymer for paper, film, and foil
SUNIGUM® P2100 ACR Terpolymer designed for elastomeric modification of PVC and plastic goods
SUNIGUM® P95 ACR Acrylate terpolymer partitioned with calcium carbonate
SYNOVUS™ NBR SyNovus is a new nitrile technology offered by Synthomer. It is designed with proprietary cross-linking to optimize barrier protection performance of the final dipped gloves. With this proprietary technology, it is therefore able to be cured at much lower temperature than conventional latex and require no sulfur and accelerator.
SYNOXOL™ BEPD OTH 2-Butyl-2-Ethyl-1,3-PropanediolWhite crystalline solidDiol containing primary hydroxyl groupsThe product is FDA approvedCAS number: 115-84-4EC (EINECS) number: 204-111-7HS number: 2905 39
SYNOXOL™ BEPD70L OTH BEPD 70L is a mixture of 2-Butyl-2-Ethyl-1,3-Propanediol (BEPD), Neopentyl Glycol and waterClear and colourless liquid at room temperatureDiol containing primary hydroxyl groupsCAS number: 115-84-4, 126-30-7, 7732-18-5EC (EINECS) number: 204-111-7, 204-781-0, 231-791-2 HS number: 3824 99
SYNTHOMER™ 6328 NBR SYNTHOMER 6328 is an aqueous, colloidal dispersion of carboxylated butadiene-acrylonitrile copolymer with a medium acrylonitrile level. The dispersion contains an emulsifier system and is stabilized with an antioxidant.
SYNTHOMER™ 6329 NBR SYNTHOMER 6329 is an aqueous, colloidal dispersion of carboxylated butadiene-acrylonitrile copolymer with a medium acrylonitrile level. The dispersion contains an emulsifier system and is stabilized with an antioxidant.
SYNTHOMER™ 6330 NBR SYNTHOMER 6330 is an aqueous, colloidal dispersion of carboxylated butadiene-acrylonitrile copolymer with a medium acrylonitrile level. The dispersion contains an emulsifier system and is stabilized with an antioxidant.
SYNTHOMER™ 6338 NBR SYNTHOMER 6338 is an aqueous, colloidal dispersion of carboxylated butadiene-acrylonitrile copolymer with a high acrylonitrile level. The dispersion contains an emulsifier system and is stabilized with an antioxidant
SYNTHOMER™ 6348HS NBR SYNTHOMER 6348HS is an aqueous, colloidal dispersion of carboxylated butadiene-acrylonitrile copolymer with high acrylonitrile content. The dispersion contains an emulsifier and is stabilized with an antioxidant.
SYNTHOMER™ 6628 NBR SYNTHOMER 6628 is an aqueous, colloidal dispersion of carboxylated butadiene-acrylonitrile copolymer with a high acryonitrile level. The dispersion contains an emulsifier system and is stabilized with an antioxidant.
SYNTHOMER™ NX 795 OTH 2,2,4-Trimethyl-1,3-pentanediol-monoisobutyrate Isobutyric acid, monoester with 2,2,4-trimethylpentane-1,3-diolCAS number: 25265-77-4EC (EINECS) number: 246-771-9
SYNTHOMER™ NX 800 OTH 1-Isopropyl-2,2-dimethyltrimethylene diisobutyrateTrimethyl Pentanyl DiisobutyrateCAS number: 6846-50-0EC (EINECS) number: 229-934-9
SYNTHOMER™ VL10946 XSBR SYNTHOMER VL10946 is an aqueous, anionic dispersion of a carboxylated self-crosslinking butadiene styrene copolymer containing a non-staining antioxidant.
SYNTHOMER™ X1130 NBR SYNTHOMER X1130 is an aqueous, colloidal dispersion of a carboxylated butadiene-acrylonitrile copolymer with a medium acrylonitrile level. The dispersion contains an emulsifier system and is stabilized with an antioxidant.
SYNTHOMER™ X1138 NBR SYNTHOMER X1138 is an aqueous, colloidal dispersion of carboxylated butadiene-acrylonitrile copolymer with a medium acrylonitrile level. The dispersion contains an emulsifier system and is stabilized with an antioxidant.
SYNTHOMER™ X1150 NBR SYNTHOMER X1150 is an aqueous, colloidal dispersion of carboxylated butadiene-acrylonitrile copolymer with a high acrylonitrile level. The dispersion contains an emulsifier system and is stabilized with an antioxidant.
SYNTHOMER™ X1172 NBR SYNTHOMER X1172 is an aqueous, colloidal dispersion of carboxylated butadiene-acrylonitrile copolymer with a high acrylonitrile level. The dispersion contains an emulsifier system and is stabilized with an antioxidant.
SYNTHOMER™ X6311 NBR SYNTHOMER X6311 is an aqueous, colloidal dispersion of carboxylated butadiene-acrylonitrile copolymer with a medium acrylonitrile level. The dispersion contains an emulsifier system and is stabilized with an antioxidant.
SYNTHOMER™ X6322 NBR SYNTHOMER X6322 is an aqueous, colloidal dispersion of carboxylated butadiene-acrylonitrile copolymer with a medium acrylonitrile level. The dispersion contains an emulsifier system and is stabilized with an antioxidant.
SYNTHOMER™ X6617 NBR SYNTHOMER X6617 ia an aqueous, colloidal dispersion of carboxylated butadiene-acrylonitrile copolymer with a high acrylonitrile level. The dispersion contains an emulsifier system and is stabilized with an antioxidant.
SYNTHOMER™ X6810 NBR SYNTHOMER X6810 is an aqueous, colloidal dispersion of carboxylated butadiene-acrylonitrile copolymer with a medium acrylonitrile level. The dispersion contains an emulsifier system and is stabilized with an anitoxidant.
SYNTHOMER™ X90Y20 NBR SYNTHOMER X 90Y20 is an aqueous, colloidal dispersion of carboxylated butadiene-acrylonitrile copolymer with a medium acrylonitrile level. The dispersion contains an emulsifier system and is stabilized with an antioxidant.
SYNTHOMER™ XVT-LA NBR SYNTHOMER XVT-LA is an aqueous, colloidal dispersion of a carboxylated butadiene-acrylonitrile copolymer with a medium acrylonitrile level. The dispersion contains an emulsifier system and is stabilized with an antioxidant.
Wingstay™ L Powder OTH Wingstay L Powder antioxidant is highly effective and can be used directly, or after being pre-dispersed or emulsified for latex applications.Wingstay L Powder offers excellent protection against oxygen attack and prevents product degradation and discoloration during processing and storage.
XP™ 3740 SA Aqueous dispersion of a styrene-acrylic copolymer, anionic, APEO free.

Contact our technical specialists for a no-obligation discussion of how Synthomer’s products can help improve your adhesives products. 

home » Markets & Products » EMEA » Adhesives » Other adhesive

6