Waterproofing

Binders for superior flexible concrete, bitumen and liquid applied membrane (LAM) waterproofing applications

Synthomer is a specialist supplier of water-based binders optimised for use in waterproofing products. Our wide range of carboxylated styrene butadiene rubber (XSBR), high-styrene styrene butadiene rubber (HS-SBR) and acrylic dispersions deliver excellent performance across the various technologies applied in the waterproofing industry, such as flexible concrete, bitumen and liquid applied membranes (LAM).

Liquid applied membranes: essential to modern building construction

Liquid-applied membranes (LAM), also known as ´damp-proof’ membranes´ (DPM), have become increasingly important in new building construction and the renovation of older ones. Synthomer’s binders will allow you to formulate ready-to-use compounds that provide seamless protection of moisture-sensitive substrates, well balanced mechanical properties, high flexibility, good crack-bridging properties and low water vapour permeability.

Our Lipaton SB 47B40 for thick-layer coatings has been an industry standard for many years. Now, to meet the increasing demands for binders that comply with the most stringent workplace health requirements, Synthomer has developed new Lipaton SB 60B11, a low-VOC and low-odour XSBR binder offering even better adhesion and elasticity.

Synthomer binders for cementitious waterproofing systems

Cementitious waterproofing systems are used to protect mineral-based substrates for interior and exterior applications, for example water reservoirs, swimming pools and balconies. Our dispersions build a polymer matrix in the membrane to form a very dense, elastomeric barrier to liquids after curing. The cementitious waterproofing membrane maintains its flexibility under permanent immersion in water and when exposed to a wide variety of weather conditions. Plextol D 324 is ideal for applications requiring very good low temperature flexibility. Synthomer offers a broad range of dispersions for two-pack (2C) cementitious waterproofing systems based on XSBR (Lipaton), styrene acylic (Revacryl) and pure acrylic (Plextol) dispersions. These can be tailored to meet your specific requirements.

  • Comprehensive product range for liquid applied and cementitious waterproofing systems.
  • Formaldehyde-free and APEO-free systems.
  • Excellent durability.
  • Products optimised for interior and exterior applications.

Recommended Products

Tradename Chemistry Description
LIPATON™ SB 20W20 XSBR LIPATON SB 20W20 is an anionic carboxylated styrene/butadiene copolymer latex.
LIPATON™ SB 2540 HSSBR LIPATON SB 2540 is an aqueous high solids dispersion of a styrene-butadiene copolymer. The dispersion is free from solvents and plasticizers and does not contain antioxidant.
LIPATON™ SB 29Y146 XSBR LIPATON SB 29Y146 is a water-based non-ionically stabilized hydrolysis-resistant dispersion of a carboxylated styrene-butadiene copolymer. The dispersion is freeze-thaw stable. It contains an antioxidant and an antifoam and is compatible with most hydraulic binders.This product is free from APEOs and ammonia.
LIPATON™ SB 33Y50 XSBR LIPATON SB 33Y50 is an aqueous non-ionically stabilized dispersion of a carboxylated butadiene-styrene copolymer latex which is resistant against saponification. The dispersion is freeze-thaw stable.
LIPATON™ SB 47B40 XSBR LIPATON SB 47B40 is an anionic, carboxylated styrene-butadiene copolymer latex containing a non-staining antioxidant.
LIPATON™ SB 5843 XSBR LIPATON SB 5843 is a ready-for-use aqueous dispersion of a styrene-butadiene copolymer with high stability against electrolytes. It contains an APEO free anionic/nonionic emulsifier system and is free from film forming aids, solvents, plasticizers, and ammonia. LIPATON SB 5843 contains a special defoamer to reduce the air content in cement mortars.
LIPATON™ SB 60B11 XSBR LIPATON SB 60B11 is an anionic, carboxylated styrene-butadiene copolymer latex containing a non-staining antioxidant.
LIPREN™ B CR LIPREN B is an aqueous high solids dispersion of a polymer of 2-chlorobutadiene (1.3). The dispersion contains an anionic emulsifier system and is free from film forming aids, solvents and plasticizers.
PLEXTOL™ D 324 PA PLEXTOL D 324 is an aqueous, high solids dispersion of an acrylic ester copolymer. The dispersion contains an anionic/nonionic emulsifier system and is free from film forming aids, solvents and plasticizers.
PLEXTOL™ D 5241 PA PLEXTOL D 5241 is an aqueous, high solids dispersion of an acrylic ester copolymer. The dispersion contains an APEO free anionic/nonionic emulsifier system and is free from film forming aids, solvents and plasticizers.
PLEXTOL™ ULTRAFINE PR 3500 PA PLEXTOL UltraFine PR 3500 is an aqueous dispersion of acrylic copolymer with a very fine particle size.
REVACRYL™ AE 3020 SA REVACRYL AE 3020 is a finely dispersed, aqueous dispersion of an acrylic ester-styrene copolymer designed for construction applications including waterproofing and ceramic tile adhesives. The dispersion contains an anionic emulsifier system and is free from film forming aids, solvents and plasticizers.
REVACRYL™ AE 3737 SA REVACRYL AE 3737 is a finely dispersed, aqueous dispersion of an acrylic ester-styrene copolymer designed for construction applications including waterproofing and ceramic tile adhesives.The dispersion contains an anionic emulsifier system and is free from film forming aids, solvents, plasticizers and ammonia.
REVACRYL™ AE 4522 SA REVACRYL AE 4522 is a specially modified, aqueous dispersion of a styrene-acrylic ester copolymer for waterproofing and tile adhesive applications. The polymer is engineered for excellent wet adhesion.REVACRYL AE 4522 contains an anionic emulsifier system and is free from film forming aids, solvents and plasticizers.
REVACRYL™ R 387 SA REVACRYL R 387 is a surfactant stabilised, acrylic/styrene copolymer dispersion. REVACRYL R 387 is free from APEO.
REVACRYL™ ULTRAFINE 4210 SA REVACRYL UltraFine 4210 is a fine particle sized aqueous dispersion of a styrene-acrylic copolymer recommended for mortar and waterproofing applications.

Contact our technical specialists for a no-obligation discussion of how Synthomer’s products can help improve your concrete, bitumen and liquid applied membrane (LAM) waterproofing products.

home » Markets & Products » EMEA » Construction » Waterproofing

6