PLEXTOL D 512

PLEXTOL D 512 is a finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. The dispersion contains an anionic emulsifier system and is free from APEOs, film forming aids, solvents and plasticizers.

Available Documents

TDS Download

Technical Informations

Application Advice/Typical Applications

PLEXTOL D 512 is preserved against bacterial and fungal attack. In the manufacture of finished products, the material has to be retreated, as usual, with suitable biocides to give enhanced preservation.

Above minimum film forming temperature PLEXTOL D 512 forms a clear, tack-free film. PLEXTOL D 512 is a non-yellowing, light- resistant pure acrylic dispersion, which is characterized by excellent weatherability. Masonry paints based on PLEXTOL D 512 exhibit a reduced dirt pick-up. PLEXTOL D 512 can be used as an allround binder. Primary applications are: high-grade, non-yellowing facade paints, synthetic resin plasters, coatings for concrete roof tiles, tinting paints, coatings for concrete, and primers for mineral substrates

Shipping and Storage

PLEXTOL D 512 is supplied in road tankers or in non-returnable plastics drums secured by a lid with clamping ring or in non-returnable palletized bulk containers (net weight 1,000 kg). PLEXTOL D 512 has to be stored protected from frost and, as far as possible, below 40 °C. Storage at temperatures between + 5 and + 30 °C is recommendable. PLEXTOL D 512 contains a preservative to counter microbial attack during transportation. To protect it against germination during subsequent storage, absolutely stringent plant hygiene and, under certain circumstances, the addition of suitable preservatives will be necessary. Care must be taken to ensure that drums and storage containers are tightly closed. During processing, storage and transport of the product contact with metals unprotected against corrosion (likewise non-ferrous metals) has to be avoided. When stored correctly PLEXTOL D 512 has a storage life of 12 months from date of delivery.

Product Security/Health and Safety

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

Effluents and Pollution Control

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

For further information regarding this product please refer to:

Zieglerova, Jeaneta
Phone: +420 737 206 966
FAX:
eMail: Jeaneta.Zieglerova@synthomer.com


Properties

Character Value Unit
Mean Particle Size 0.1 µm 
Solids Content 50
pH Value 8.0  
Viscosity (Brookfield LVT Spindle 2/6 Upm) 2500 mPas 
Glass Transition Temperature 26 °C 
Density 1.04 g / cm³ 
Surface Tension 42 mN/m 
Minimum Film-Forming Temperature 17 °C 
Water Absorption (24h) 7
Tensile Strength 10 N/mm² 
Elongation at Break 200


© 2014 Synthomer plc

Home » Markets & Products » Productfinder » Products A-Z » Technical datasheet

  • Paper & Board
  • Construction & Coatings
  • Health & Protection
  • Carpet, Compounds & Foam
  • Functional Polymers
  • Performance Polymers
  • Productfinder
  •     Products A-Z
  •     Products by Specifications
  • scatlife.com amateurfetishist.com tryfist.net