Litex® T 62W20 is an aqueous dispersion of a carboxylated styrene-butadiene copolymer. The dispersion was specially designed for the impregnation of needlefelt and also for the finishing of woven carpets. Litex® T 62W20 give the finished article a soft handle. Litex® T 62W20 contains an antioxidant.

Available Documents

TDS Download

Technical Informations

Application Advice/Typical Applications

Litex® T 62W20 is characterised by a high mechanical stability, and as a result does not form deposits, even after long periods of operation on the squeeze rollers. Litex® T 62W20 can be utilised for full bath impregnation of needlefelt and for application from a lick roller trough. The viscosity of compounds can be adjusted to the desired level using the normal acrylate thickeners which are well known in the industry (e.g. Plextol CT 3103). Litex® T 62W20 is capable, without the addition of extra surface active agents, of being foamed up. As a consequence the application weight, when using a horizontal foulard, can be accurately adjusted. Litex® T 62W20 ensures that woven carpets finished with it, exhibit very good fray resistance. For the application of very low weights the dispersion can be diluted, normally without problems, to low concentrations. If the water in question is very hard, it is best to make a laboratory scale test, before manufacturing a plant batch.

Litex® T 62W20 has good storage characteristics and also good chemical stability.

Shipping and Storage

Litex® T 62W20 is normally delivered in road tankers. Shipment in 1 ton containers is also possible for customers who are just taking small quantities. The storage temperature of the dispersion should not fall below + 5 °C and not exceed + 40 °C. In air-tight, unopened, original drums or containers, and provided the storage conditions are met, the dispersion is stable for 6 months after delivery. However a slight drying of the surface, or some cream formation cannot be ruled out. It is therefore advisable that the dispersion, or compounds made from it, should be stirred, or mixed before use. The contents of drums, or containers, should be used up as soon as possible after opening.

Product Security/Health and Safety

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

Effluents and Pollution Control

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

For further information regarding this product please refer to:

Reidel, Sven
Phone: +49 2365 49 7958
FAX: +49 2365 49 160 4958


Character Value Unit
Solids Content 50.0
pH Value 7.5  
Viscosity (Brookfield LV 2/60) < 500 mPas 

© 2014 Synthomer plc

Home » Markets & Products » Productfinder » Products A-Z » Technical datasheet

  • Paper & Board
  • Construction & Coatings
  • Health & Protection
  • Carpet, Compounds & Foam
  • Functional Polymers
  • Performance Polymers
  • Productfinder
  •     Products A-Z
  •     Products by Specifications