REVULTEX MLA 21

MLA 21 is a low ammonia prevulcanised natural rubber latex without antioxidant and had medium modulus property.

Available Documents

TDS Download

Technical Informations

Application Advice/Typical Applications



MLA 21 has been specially developed for catheter manufacture and other dipped medical products where higher purity latex with reduced proportion of non-rubber constituents is required. It is also suitable for dipping electrician glove. The vulcanisation systems used for MLA21 comply with the generally applicable sections of FDA and BGA requirements.

Shipping and Storage

Store the product under shelter at temperature between 10°C and 33°C. Creaming of the latex compound may occur during storage. It is therefore necessary to mix well the latex before use. As the product is based on natural rubber latex, changes in latex colloidal properties may occur during storage. Available in both bulk and drums.

Product Security/Health and Safety

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

Effluents and Pollution Control

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

For further information regarding this product please refer to:

Synthomer Limited Head Office
Phone: +44 (0)1279 436 211
FAX: +44 (0)1279 444 025
eMail: info@synthomer.com


Properties

Character Value Unit
Total Solid Content 60.5
Ammonia Content 0.35
Mechanical Stability 1300 sec 
Ford Cup 3 Viscosity@ 25°C 40.0 max. sec 
Modulus at 700% elongation 11.30 MPa 
Tensile Strength 25.0 MPa 
Modulus 700% 50 min.  
Tensile Strength 75  


© 2014 Synthomer plc

Home » Markets & Products » Productfinder » Products A-Z » Technical datasheet

  • Paper & Board
  • Construction & Coatings
  • Health & Protection
  • Carpet, Compounds & Foam
  • Functional Polymers
  • Performance Polymers
  • Productfinder
  •     Products A-Z
  •     Products by Specifications
  • scatlife.com amateurfetishist.com tryfist.net