PLEXTOL D 224

PLEXTOL D 224 is an aqueous emulsion of a thermoplastic acrylic polymer.

Available Documents

TDS Download

Technical Informations

Application Advice/Typical Applications


PLEXTOL D 224 is protected against bacterial attack during storage. In the manufacture of finished products, the material has to be re-treated, as usual, with suitable agents to give enhanced preservation. Film properties Evaporation of the water above the minimum film-forming temperature leaves a clear, colourless and hydrophobic film, which is very soft, extremely tacky at room temperature and very slightly water-sensitive. The film is insoluble in water and partly soluble in organic solvents. Instruction for use - PLEXTOL D 224 can be diluted with water to provide liquors of any desired concentration. - PLEXTOL D 224 can be thickened by means of thickener emulsions (e. g.ROHAGIT SD 15) and cellulose or starch derivatives to provide printing, nip-padding and coating compounds. - PLEXTOL D 224 can be applied by the usual methods such as spraying, impregnating, printing, padding and coating. - By mixing PLEXTOL D 224 with other emulsions from the PLEXTOL range, the film properties of the former can be influenced within wide limits and thus adapted to the intended application. - Silicone coated papers are suitable for covering the self-adherent coatings. Applications - PLEXTOL D 224 can be used to produce self-adherent coatings on a variety of materials such as plastic sheeting, paper, textiles, sheet metal, glass, etc. - PLEXTOL D 224 can be used as a tackifier with hydrophobic character.

Shipping and Storage

Store at an even temperature of between +5°C and +35°C avoiding frost and direct sunlight. Stir product before use. If stored according to these conditions and in the original unopened containers, the dispersion will be stable for 12 months following delivery. Product should be used as soon as possible after opening. During processing, storage and transport, avoid any contact with metals (including non-ferrous metals) which are not protected against corrosion. Detailed information is available on request.

Product Security/Health and Safety

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

Effluents and Pollution Control

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

For further information regarding this product please refer to:

Dr. Greiner, Katja
Phone: +49(0)2365-49-9816
FAX: +49(0)2365-49-6510
eMail: katja.greiner@synthomer.com


Properties

Character Value Unit
Solids Content 59
pH Value 9.0  
Viscosity (Brookfield RVT 2/20) 170 mPa s 
Glass Transition Temperature - 40 °C 
Mean Particle Size 0.6 µm 
Ionic Character anionic  
Minimum Film-Forming Temperature < 0 °C 
Peel adhesion (PET/Steel) 10 N/25 mm 
Loop tack (PET/Glass) 17 N/25 mm 
Dynamic shear (PET/Steel) 23 N/12.7 mm 


© 2014 Synthomer plc

Home » Markets & Products » Productfinder » Products A-Z » Technical datasheet

  • Paper & Board
  • Construction & Coatings
  • Health & Protection
  • Carpet, Compounds & Foam
  • Functional Polymers
  • Performance Polymers
  • Productfinder
  •     Products A-Z
  •     Products by Specifications
  • scatlife.com amateurfetishist.com tryfist.net