PLEXTOL D 2741

PLEXTOL D 2741 is an ready to use aqueous emulsion of an acrylic polymer for PSA labels.



Technical Informations

Application Advice/Typical Applications


Plextol D 2741 is preserved against bacterial and fungal attack. In the manufacture of finished products, the material has to be retreated, as usual, with suitable biocides to give enhanced preservation. Evaporation of the water above the minimum film-forming temperature leaves a clear, colourless and hydrophobic film, which is very soft, extremely tacky at room temperature and very slightly water-sensitive. The film is insoluble in water and partly soluble in organic solvents. -  PLEXTOL D 2741 can be used for the production of  PSA labels.



Shipping and Storage

Store at an even temperature of between +5°C and +35°C avoiding frost and direct sunlight. Stir product before use. If stored according to these conditions and in the original unopened containers, the dispersion will be stable for 6 months following delivery. Product should be used as soon as possible after opening. During processing, storage and transport, avoid any contact with metals (including non-ferrous metals) which are not protected against corrosion. Detailed information is available on request.

Product Security/Health and Safety

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

Effluents and Pollution Control

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

For further information regarding this product please refer to:

Dr. Greiner, Katja
Phone: +49(0)2365-49-9816
FAX: +49(0)2365-49-6510
eMail: katja.greiner@synthomer.com


Properties

Character Value Unit
Solids Content 55
pH Value 5.5  
Viscosity (Brookfield RVT Spindle 2/20 Upm) 150 mPa*s 


Available Documents

Technical datasheet


© 2018 Synthomer plc