SYNTHEBOND 7201LSE

Synthebond 7201LSE is a non-tackified acrylic emulsion pressure sensitive adhesive designed for low energy substrate applications.



Technical Informations

Application Advice/Typical Applications

Key Features:

  • Excellent adhesion to low energy substrates
  • Excellent blushing resistance
  • Excellent clarity and UV stability
  • Strong balance of adhesion and shear properties
  • Adhesion to a variety of corona treated films
  • FDA 21 CFR 175.105 compliant


Synthebond 7201LSE s excellent water/moisture resistance and superb low energy substrate wetting and bonding make it an excellent choice for specialty applications where adhesion to PP/PE is required.  The product maintains high bonding & clarity after moisture exposure and water immersion.Synthebond 7201LSE has been formulated to meet demands of high speed reverse gravure coating.






Shipping and Storage

Store at an even temperature of between +5°C and +35°C avoiding frost and direct sunlight. Stir product before use. If stored according to these conditions and in the original unopened containers, the dispersion will be stable for 6 months following delivery. Product should be used as soon as possible after opening. During processing, storage and transport, avoid any contact with metals (including non-ferrous metals) which are not protected against corrosion. – Agitate well before use. - Detailed information is available on request.




Product Security/Health and Safety

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.





For further information regarding this product please refer to:

Synthomer, SBU Functional Solutions
Phone:
FAX:
eMail: info.america@synthomer.com


Properties

Character Value Unit
Solids 49.0
Viscosity (RTV #3/20) 400 cp 
pH 7.0  
Tg - 42 °C 


Available Documents

Technical datasheet


© 2018 Synthomer plc