SYNTHEBOND E 2050

Synthebond E 2050 is an acrylic copolymer emulsion designed as a high solids general-purpose pressure sensitive adhesive for tapes and labels.



Technical Informations

Application Advice/Typical Applications

Synthebond E 2050 provides an excellent balance of peel and tack properties with moderate shear resistance and high adhesion to a variety of treated films.

The high solids of Synthebond E 2050 exhibit fast drying and faster line speeds. It has low viscosity for ease in handling.

The dry film of Syntebond E 2050 is clear and non-yellowing.




Synthebon E 2050 can be used for paper and film labels, tapes and lamination.





Shipping and Storage

Store at an even temperature of between +5°C and +35°C avoiding frost and direct sunlight. Stir product before use. If stored according to these conditions and in the original unopened containers, the dispersion will be stable for 6 months following delivery. Product should be used as soon as possible after opening. During processing, storage and transport, avoid any contact with metals (including non-ferrous metals) which are not protected against corrosion. Detailed information is available on request.



Product Security/Health and Safety

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.





For further information regarding this product please refer to:

Synthomer, SBU Functional Solutions
Phone:
FAX:
eMail: info.america@synthomer.com


Properties

Character Value Unit
Solids Content 63
pH 7.0  
Viscosity (Brookfield LVDV 60rpm, 25°C) 250 cP 
Glass Transition Temperature -42 °C 
Density 1.03 g/cm³ 



© 2017 Synthomer plc