Durasol™330 is a thermoplastic acrylic resin solution specially developed in a ready-to-use, low odour version for use particularly in enclosed areas where solvent odour build-up would normally be a problem. It provides a hard, yet flexible film, though films will generally have poorer weathering and UV resistance compared with products manufactured in aromatic solvents, such as xylene.

Applications include interior and exterior clear coatings and pigmented finishes for protecting concrete and masonry, slate sealers and coatings for pavers. 

Technical Informations

Application Advice/Typical Applications


  • designed for use on masonry in enclosed areas
  • suitable for interior and exterior clear coatings and pigmented finishes low viscosity
  • compatible with a wide range of industrial solvents
  • compatible with most common phthalate and phosphorus plasticizers 
  • can be blended with a range of other resins including some alkyds 

Performance benefits:

  • ready to use formulation
  • low odour build-up in enclosed areas
  • produces a hard, yet flexible film 

Shipping and Storage

To ensure maximum stability and optimum polymer properties, product should be stored in closed container at a temperature between 5°C and 35°C, away from heat sources and direct sunlight. Product should be used as soon as possible after opening. All storage should conform to local fire and building codes.

When properly stored, this product will remain stable for 12 months from date of delivery.

Product Security/Health and Safety

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

Effluents and Pollution Control

For further information regarding this product please refer to:

Synthomer Sdn Bhd,
Phone: +607-739 1000
FAX: +607-739 1036
eMail: info.asia@synthomer.com


Character Value Unit
Non volatile - weight 49 - 51 %  
Viscosity 1,000 - 30,000 cps 
Flash point 33 °C 
Tg 43 °C 

Available Documents

Technical datasheet

© 2018 Synthomer plc