PLEXTOL D 2428

Plextol™ D 2428 is a self crosslinking acrylic emulsion which exhibits excellent wet scrub resistance and is designed specifically to be formulated as a surface sealer for interior and exterior substrates. Plextol D 2428 self crosslinking acrylic emulsion will not blush or water spot after 3 - 4 days curing at room temperature.



Technical Informations

Application Advice/Typical Applications

For film formation, it is necessary to add approx. 8% coalescent on emulsion solids and a 3 parts Texanol: 1 part butyl cellosolve combination is suggested, but other alternatives can be used but should be evaluated.

Care must be taken to add coalescent slowly whilst stirring.


Features:

  • can be formulated as a surface sealer for interior and exterior substrates
  • can be formulated as a pigmented coating to enhance architectural effects of buildings and building materials. 


Performance benefits:

  • excellent water resistance
  • excellent wet scrub 
  • excellent film clarity 




Shipping and Storage

To ensure maximum stability and optimum polymer properties, product should be stored in closed container at a temperature between 5°C and 35°C, away from heat sources and direct sunlight. Product should be used as soon as possible after opening. All storage should conform to local fire and building codes.

When properly stored, this product will remain stable for 6 months from date of delivery.



Product Security/Health and Safety

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.




Effluents and Pollution Control




For further information regarding this product please refer to:

Lim, Eng Seng
Phone:
FAX:
eMail: engseng.lim@synthomer.com


Properties

Character Value Unit
Non volatile - weight 40 - 42 %  
Viscosity 600 - 1,100 cps 
pH 8.5 - 9.2  
Tg 48 °C 


Available Documents

Technical datasheet


© 2020 Synthomer plc



6