Duramul™ 1000 self-cross-linking acrylic emulsion is designed specifically to be formulated as a sealer for interior and exterior substrates. It will not blush or water spot after 3 - 4 days curing at room temperature.

Technical Informations

Application Advice/Typical Applications

For film formation, it is necessary to add approximately 8% coalescent on emulsion solids. A 3 parts Texanol: 1 part butyl cellosolve combination is suggested, but alternatives should be evaluated.

Care must be taken to add coalescent slowly while stirring.


  • sealer for interior and exterior substrates
  • can be formulated as a pigmented coating to enhance architectural effects of buildings and building materials.

Performance benefits:

  • forms an extremely durable and protective coating
  • cures at room temperature
  • excellent water resistance
  • excellent film clarity 

Shipping and Storage

To ensure maximum stability and optimum polymer properties, product should be stored in closed container at a temperature between 5°C and 35°C, away from heat sources and direct sunlight. Product should be used as soon as possible after opening. All storage should conform to local fire and building codes.

When properly stored, this product will remain stable for 6 months from date of delivery.

Product Security/Health and Safety

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

Effluents and Pollution Control

For further information regarding this product please refer to:

Synthomer Sdn Bhd,
Phone: +607-739 1000
FAX: +607-739 1036
eMail: info.asia@synthomer.com


Character Value Unit
Non volatile - weight 40 - 42 %  
pH 8.5 - 9.2  
Tg 48 °C 
Viscosity 800 - 1,500 cps 

Available Documents

Technical datasheet

© 2020 Synthomer plc