Duramul™ 1000 self-cross-linking acrylic emulsion is designed specifically to be formulated as a sealer for interior and exterior substrates. It will not blush or water spot after 3 - 4 days curing at room temperature.
For film formation, it is necessary to add approximately 8% coalescent on emulsion solids. A 3 parts Texanol: 1 part butyl cellosolve combination is suggested, but alternatives should be evaluated.
Care must be taken to add coalescent slowly while stirring.
To ensure maximum stability and optimum polymer properties, product should be stored in closed container at a temperature between 5°C and 35°C, away from heat sources and direct sunlight. Product should be used as soon as possible after opening. All storage should conform to local fire and building codes.
When properly stored, this product will remain stable for 6 months from date of delivery.
Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.
Synthomer Sdn Bhd,
Phone: +607-739 1000
FAX: +607-739 1036
|Non volatile - weight||40 - 42||%|
|Viscosity||800 - 1,500||cps|
|pH||8.5 - 9.2|
© 2018 Synthomer plc