AXILAT HP 8510

Axilat HP 8510 is a vinyl acetate, vinyl versatate copolymer resin in redispersible powder form. It is a highly versatile resin with high redispersibility in water and used in dry mortars.



Technical Informations

Application Advice/Typical Applications

• Tile adhesive mortars
• External insulation Finishing Systems (EIFS)
• Self-leveling underlayment (SLU)
• Gypsum joint compounds and renders/skimcoats
• Fassade renders
Axilat HP 8510 highly versatile resin with high redispersibility in water and used in dry mortars to improve workability of fresh mortar, adhesion to conventional substrates, and mechanical properties (flexibility, abrasion resistance and cohesive strength). Suitable for tile adhesives, mortars, external insulating finishing systems (EIFS), self levelling floor underlayments, gypsum joint compounds, and renders.
For additional information please contact our Technical Service team



Shipping and Storage

This product is thermoplastic in nature, therefore excessive temperature and pressure generated by over-stacking of pallets will tend to cause agglomeration of the powder with consequent difficulties in re-dispersion. To ensure that it remains in good condition, it is necessary to keep the unopened bags in an area protected from humidity and dampness and where the temperature will not exceed 25°C, and to not over-stack the pallets. We recommend that the storage time should not exceed 6 months from receipt of delivery. Storage beyond the date specified does not necessarily mean that the material is unusable, but the user should perform a quality check on the properties necessary for the intended application.
• Blends with, for example, hydraulic binders, fillers and pigments show better storage stability. However, blends of this type still have to be protected against moisture.
• Slight color variations of the dispersible polymer powder may occur without impairing the product's functionality.

Product Security/Health and Safety

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.







For further information regarding this product please refer to:

Fachinger, Thomas
Phone: +49(0)6181-9880094
FAX: +49(0)6181-9880094
eMail: thomas.fachinger@synthomer.com


Properties

Character Value Unit
Total Solids 99
Ash Content at 600°C 12
Specific Gravity 0.5 g/cm3 
Particle Size 80 µm 
MFFT (re-dispersed in water 50 % s.c.) 6 °C 


Available Documents

Technical datasheet


© 2018 Synthomer plc



6