PLEXTOL D 276

PLEXTOL D 276 is an aqueous emulsion of a thermoplastic acrylic polymer.



Technical Informations

Application Advice/Typical Applications

Plextol D 276 is preserved against bacterial and fungal attack. In the manufacture of finished products, the material has to be retreated, as usual, with suitable biocides to give enhanced preservation. Evaporation of the water above the minimum film-forming temperature leaves a clear, colourless and hydrophobic film, which is very soft, extremely tacky at room temperature. - By mixing PLEXTOL D 276 with other emulsions from the PLEXTOL range, the film properties of the former can be influenced within wide limits and thus adapted to the intended application. - PLEXTOL D 276 is crosslinkable due to the presence of functionalized comonomeres. - Silicone coated papers are suitable for covering the self-adherent coatings. - PLEXTOL D 276 can be used to produce self-adherent coatings on a variety of materials such as plastic sheeting, paper, textiles, sheet metal, glass, etc. - PLEXTOL D 276 can be used for the production of tapes.





Shipping and Storage

Store at an even temperature of between +5°C and +35°C avoiding frost and direct sunlight. Stir product before use. If stored according to these conditions and in the original unopened containers, the dispersion will be stable for 12 months following delivery. Product should be used as soon as possible after opening. During processing, storage and transport, avoid any contact with metals (including non-ferrous metals) which are not protected against corrosion. Detailed information is available on request.

Product Security/Health and Safety

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

Effluents and Pollution Control

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

For further information regarding this product please refer to:

Dr. Greiner, Katja
Phone: +49(0)2365-49-9816
FAX: +49(0)2365-49-6510
eMail: katja.greiner@synthomer.com


Properties

Character Value Unit
Solids Content 65.0
pH Value 5,3  
Viscosity (Brookfield RVT 2/20) < 700 mPas 
Glass transition temperature -42 °C 
Density 1,02 g/cm³ 
Ionic Character anionic  
Loop tack (PET / Glass) 25 N/25mm 
Peel adhesion (PET / Steel) 14 N/25mm 


Available Documents

Technical datasheet


© 2018 Synthomer plc