PLEXTOL W 1078 is a multiphase, self-crosslinking acrylic copolymer dispersion for parquet and furniture

Technical Informations

Application Advice/Typical Applications

This product may show discoloration if formaldehyde containing or formaldehyde releasing additives (like biocides) are used. For more information on this product, please contact our Technical Service Team.

PLEXTOL W 1078 is a fine particle size, slight amber, surfactant stabilised, self-crosslinking multiphase acrylic copolymer dispersion. PLEXTOL W 1078 offers high hardness, gloss, and abrasion resistance. The chemical resistance and black heel marking resistance (BHMR) are excellent. The achievable wood warmth ("Anfeuerung") and coverage are very good.
PLEXTOL W 1078 is solely recommended for interior use for varnishes and stains for parquet and furniture.

Shipping and Storage

This product is supplied in road tankers or in non-returnable plastic drums secured by a lid with clamping ring or in non-returnable palletized bulk containers (net volume 1.000 lt). The product must be protected from frost and exposure to direct sunlight. Storage temperatures between +5 °C and +30 °C are recommended. The product contains in-can preservation to protect it against microbiological attack during transportation. For protection against microbiological contamination during storage stringent plant hygiene is essential. Depending on the storage conditions addition of suitable preservatives may be necessary. Care must be taken that drums and containers are properly closed. During storage, shipping and handling contact with metal surfaces that are not corrosion protected must be avoided. When stored properly, the product has a shelf life of 12 months from the date of delivery.

Product Security/Health and Safety

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

Effluents and Pollution Control

For further information regarding this product please refer to:

Zieglerova, Jeaneta
Phone: +420 737 206 966


Character Value Unit
Glass Transition Temperature 35 / 80 °C 
Minimum Film Forming Temperature (MFFT) 24 °C 
Particle Size < 0.1 microns 
pH 8.0
Specific Gravity (Dispersion) 1.03  
Specific Gravity (Dry Polymer) 1.08  
Total Solids 42.0
Viscosity 500 mPa.s 

Available Documents

Technical datasheet

© 2020 Synthomer plc