SYNTHOMER 6330 is an aqueous, colloidal dispersion of carboxylated butadiene-acrylonitrile copolymer with a medium acrylonitrile level. The dispersion contains an emulsifier system and is stabilized with an antioxidant.

Technical Informations

Application Advice/Typical Applications

SYNTHOMER 6330 is a reduced odour product, recommended for producing thin film barrier of low thickness with good tensile strength and excellent elongation at break. The product is characterized by faster film gelation for better adaptability to producing articles of low thickness with good film formation using a typical coagulant dipping process. Our technical service team would be please to provide you with a typical formulation as a guide and assist if needed.

SYNTHOMER 6330 is easy to compound with no specific requirements during compounding as the material provides good stabilization. It is easily adaptable to most manufacturing, providing high yield.

Shipping and Storage

SYNTHOMER 6330 is supplied in road tankers or in non-returnable plastics drums secured by a lid with clamping ring or in non-returnable palletized bulk containers. Store at an even temperature of between + 5°C and + 35°C, avoiding frost and direct sunlight. Care must be taken that drums and storage containers are closed tightly. During processing, storage and transport of the product, contact with metals, unprotected against corrosion (likewise non ferrous metals), has to be avoided. If stored according to these conditions, in appropriate containers or in bulk condition with proper hygiene management, Synthomer is able to confirm that the latex is stable for 6 months from production date.

Product Security/Health and Safety

Please refer to the Material Data Safety Data Sheet for safety and environmental information. SYNTHOMER 6330 is not classified as dangerous according to EU Directive 1999/45/EC and does not require any special labelling.

Effluents and Pollution Control

For further information regarding this product please refer to:

Synthomer Sdn Bhd,
Phone: +607-739 1000
FAX: +607-739 1036


Character Value Unit
Solid Content 45 ± 1.0
pH Value 8.0 - 8.5
Viscosity 40 - 110 mPa.s 
Surface Tension 29 - 36 mN/m 
Acrylonitrile Content medium  

Available Documents

Technical datasheet

© 2020 Synthomer plc