Lipaton SB 29Y130 is an water-based non-ionically stabilized hydrolysis-resistant dispersion of a carboxylated styrene-butadiene copolymer. The dispersion contains an antioxidant and is freeze stable. This product is free from APEOs and ammonia.

Technical Informations

Application Advice/Typical Applications

For additional information please contact our technical service team.

Lipaton SB 29Y130 is used for modifying hydraulic binder-systems in all common applications customary of polymer dispersion for constructions, as industrial flooring, mortars, primer, cement containing adhesives, sealing slurries, bitumen compounds. Lipaton SB 29Y130 is well compatible with most of the hydraulic binders. The dispersion does not contain a defoamer in order to leave all flexibility to the user regarding the choice of defoamer. Even at higher temperatures (> 25°C) the addition of Lipaton SB 29Y130 prevents a premature stiffening of the mortar. The dispersion is free of plasticizers and other additives with tendency to migration.

Shipping and Storage

LIPATON SB 29Y130 must be stored in closed containers between + 5 °C and + 35 °C and protected from frost and direct sunlight. If stored according to these conditions and in the original unopened containers, the dispersion will be stable for 12 months following delivery. However some cream formation cannot be ruled out. It is therefore advisable that the dispersion should be stirred, or mixed before use. Information on environmental and hazard data may be taken from the material safety data sheet.

Product Security/Health and Safety

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

Effluents and Pollution Control

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

For further information regarding this product please refer to:

Fachinger, Thomas
Phone: +49(0)6181-9880094
FAX: +49(0)6181-9880094


Character Value Unit
Total Solids 47.0
pH 11.0  
Viscosity (Brookfield LVF, 60 rpm) 90 mPa.s 

Available Documents

Technical datasheet

© 2018 Synthomer plc