EMULTEX FR 747 is a specialist vinyl acetate copolymer dispersion for intumescent paints. EMULTEX FR 747 is a medium particle size, cellulose ether stabilised copolymer dispersion. The product is heavily stabilised and designed for high performance intumescent coatings. This product is free from APEO.

Technical Informations

Application Advice/Typical Applications

Compared to conventional copolymers and terpolymers EMULTEX FR 747 confers excellent pigment binding. This product produces intumescent coatings with high interior and exterior durability. Depending on the formulation of such coatings 120 min. protection is possible. For more information on this product, please contact our Technical Service Team.

EMULTEX FR 747 can be incorporated into paints in the usual manner with the normal range of paint ingredients. For optimum paint stability formulations should not contain precipitated calcium silicate.

Shipping and Storage

Store at an even temperature of between +5°C and +45°C avoiding frost and direct sunlight. Stir product before use. If stored according to these conditions and in the original unopened containers, the dispersion will be stable for 12 months. Product should be used as soon as possible after opening. Detailed information is available on request.

Product Security/Health and Safety

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

Effluents and Pollution Control

For further information regarding this product please refer to:

Ramsurat, Pal
Phone: 0 (0966) 13 812 1045
FAX: 0 (0966) 13 812 1263
eMail: pal.ramsurat@synthomer.com


Character Value Unit
Total Solids 55.0
pH 4.5  
Viscosity 900 mPa.s 
Particle Size 0.3 microns 
Minimum film forming temperature (MFFT) 14 °C 

Available Documents

Technical datasheet

© 2020 Synthomer plc