LITEX S 9077
Litex S 9077 is an aqueous, anionic dispersion of a self-crosslinking butadiene styrene copolymer containing a non-staining antioxidant.
Technical Informations
Application Advice/Typical Applications
Litex S 9077 is mainly used as a binder for technical textiles and fibre glass fabrics. After drying and crosslinking the polymer forms a strong, tough film. Optimum properties can be achieved by drying followed by curing at 140 °C. Additional melamine formaldehyde resin may sometimes improve resistance to solvents and water or alkaline attack. However this may marginally stiffen the handle. In any case compatibility and pot-life should be tested in advance. Litex S 9077 can be applied by all common techniques. To vary the hand it may be blended with soft hand Litex latices.
Shipping and Storage
Store at an even temperature of between +5°C and +35°C avoiding frost and direct sunlight. Stir product before use. If stored according to these conditions and in the original unopened containers, the dispersion will be stable for 12 months following delivery. Product should be used as soon as possible after opening. Detailed information is available on request.
Product Security/Health and Safety
Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal
Effluents and Pollution Control
Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal
For further information regarding this product please refer to:
Gehr, Andreas
Phone: +49 6108 919 394
FAX:
eMail: andreas.gehr@synthomer.com
Available Documents
Technical datasheet
© 2020 Synthomer plc