LITEX SX 1141

LITEX SX 1141 is an aqueous colloidal dispersion of a styrene-butadiene copolymer with carboxyl groups.The dispersion is stabilized with a low amount of an anionic emulsifier and does not contain any antioxidant.



Technical Informations

Application Advice/Typical Applications


Additional technical information is available from our technical staff



Shipping and Storage

Store at an even temperature of between +5°C and +35°C avoiding frost and direct sunlight. Stir product before use. If stored according to these conditions and in the original unopened containers, the dispersion will be stable for 12 months following delivery. Product should be used as soon as possible after opening. During processing, storage and transport, avoid any contact with metals (including non-ferrous metals) which are not protected against corrosion. Detailed information is available on request.

Product Security/Health and Safety

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

Effluents and Pollution Control

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

For further information regarding this product please refer to:

Gehr, Andreas
Phone: +49 6108 919 394
FAX:
eMail: andreas.gehr@synthomer.com


Properties

Character Value Unit
Solids Content 50.0
pH Value 8.5  
Viscosity 130 mPa s 
Surface Tension 48 mN/m 


Available Documents

Technical datasheet


© 2018 Synthomer plc