PLEXTOL X 4427

PLEXTOL X 4427 is an aqueous emulsion of an acrylic-copolymer.



Technical Informations

Application Advice/Typical Applications


PLEXTOL X 4427 is preserved against bacterial and fungal attack. In the manufacture of finished products, the material has to be retreated, as usual, with suitable biocides to give enhanced preservation. Film properties Evaporation of the water above the minimum film-forming temperature provides a clear-transparent film which is very soft and tacky at room temperature and adheres well to many kinds of material. PLEXTOL X 4427 can be used as the PSA component of protective foils.



Shipping and Storage

Store at an even temperature of between +5°C and +35°C avoiding frost and direct sunlight. Stir product before use. If stored according to these conditions and in the original unopened containers, the dispersion will be stable for 12 months following delivery. Product should be used as soon as possible after opening. During processing, storage and transport, avoid any contact with metals (including non-ferrous metals) which are not protected against corrosion. Detailed information is available on request.

Product Security/Health and Safety

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

Effluents and Pollution Control

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

For further information regarding this product please refer to:

Dr. Greiner, Katja
Phone: +49(0)2365-49-9816
FAX: +49(0)2365-49-6510
eMail: katja.greiner@synthomer.com


Properties

Character Value Unit
Solids Content 56,0
pH Value 6,5  
Viscosity (Brookfield RVT 2/20) 550 mPas 
Glass transition temperature -40 °C 
Peel adhesion (PET / Steel) ~ 8 N/25mm 
Loop tack (PET / Glass ~ 18 N/25mm 


Available Documents

Technical datasheet


© 2018 Synthomer plc