PLEXTOL DS 155

PLEXTOL DS 155 is an low VOC aqueous emulsion of a thermoplastic acrylic polymer.



Technical Informations

Application Advice/Typical Applications


PLEXTOL DS 155 is protected against bacterial attack during storage. In the manufacture of finished products, the material has to be re-treated, as usual, with suitable agents to give enhanced preservation. PLEXTOL DS 155 can be diluted with water to provide liquors of any desired concentration. PLEXTOL DS 155 can be thickened by means of thickener emulsions (e. g.PU thickener TEGO XP 8500). PLEXTOL DS 155 can be applied by the usual methods such as spraying, impregnating, printing, padding and coating. By mixing PLEXTOL DS 155 with other emulsions from the PLEXTOL range, the film properties of the former can be influenced within wide limits and thus adapted to the intended application. Silicone coated papers are suitable for covering the self-adherent coatings. - PLEXTOL DS 155 can be used to produce special self-adherent tapes.



Shipping and Storage

This product is supplied in road tankers or in non-returnable plastic drums secured by a lid with clamping ring or in non-returnable palletized bulk containers (net volume 1.000 lt). The product must be protected from frost and exposure to direct sunlight. Storage temperatures between +5 °C and +30 °C are recommended. The product contains in-can preservation to protect it against microbiological attack during transportation. For protection against microbiological contamination during storage stringent plant hygiene is essential. Depending on the storage conditions addition of suitable preservatives may be necessary. Care must be taken that drums and containers are properly closed. During storage, shipping and handling contact with metal surfaces that are not corrosion protected must be avoided. When stored properly, the product has a shelf life of 12 months from the date of delivery.

Product Security/Health and Safety

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

Effluents and Pollution Control

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

For further information regarding this product please refer to:

Dr. Greiner, Katja
Phone: +49(0)2365-49-9816
FAX: +49(0)2365-49-6510
eMail: katja.greiner@synthomer.com


Properties

Character Value Unit
Solids Content 65
pH Value 5.0  
Viscosity (Brookfield RVT 2/20) 425 mPas 
Glass Transition Temperature - 34 °C 
Mean Particle Size 0.625 µm 
Loop tack (PET/Glass) 32 N/25mm 
Peel adhesion (PET/Steel) 26 N/25mm 
Ionic Character anionic  
Dynamic shear (PET/Steel) 31 N/12.7 mm 


Available Documents

Technical datasheet


© 2018 Synthomer plc



6