PLEXTOL R 5441

PLEXTOL R 5441 is an acrylic copolymer dispersion.



Technical Informations

Application Advice/Typical Applications

For more information on this product, pease contact our Technical Service Team.


PLEXTOL R 5441 is a fine particle size, surfactant stabilised, heterogeneous dispersion. PLEXTOL R 5441 offers high gloss, block resistance, wet ahdesion, alkali and water resitance. PLEXTOL R 5441 is recommended for exterior wood stains.




Shipping and Storage

This product is supplied in road tankers or in non-returnable plastic drums secured by a lid with clamping ring or in non-returnable palletized bulk containers (net volume 1.000 lt). The product must be protected from frost and exposure to direct sunlight. Storage temperatures between +5 °C and +30 °C are recommended. The product contains in-can preservation to protect it against microbiological attack during transportation. For protection against microbiological contamination during storage stringent plant hygiene is essential. Depending on the storage conditions addition of suitable preservatives may be necessary. Care must be taken that drums and containers are properly closed. During storage, shipping and handling contact with metal surfaces that are not corrosion protected must be avoided. When stored properly, the product has a shelf life of 12 months from the date of delivery.

Product Security/Health and Safety

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

Effluents and Pollution Control

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

For further information regarding this product please refer to:

Zieglerova, Jeaneta
Phone: +420 737 206 966
FAX:
eMail: Jeaneta.Zieglerova@synthomer.com


Properties

Character Value Unit
Total Solids 49.0
pH 8.3
Viscosity 1100 mPa s 
Particle Size 100 nm 
Minimum Film Forming Temperature (MFFT) 0 °C 


Available Documents

Technical datasheet


© 2018 Synthomer plc



6