PLEXTOL D 487

PLEXTOL D 487 is a finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, solvents, and plasticizers.



Technical Informations

Application Advice/Typical Applications

PLEXTOL D 487 is preserved against bacterial and fungal attack. In the manufacture of finished products, the material has to be retreated, as usual, with suitable biocides to give enhanced preservation.

PLEXTOL D 487 is a non-yellowing, light-resistant pure acrylic dispersion, which is characterized by excellent weatherability. PLEXTOL D 487 is modified with adhesion promotors and owing to that especially qualified as binder in house paints exhibiting good adhesion to diverse substrates. Due to the soft polymer the amount of added coalescent agent and the VOC content of the paint can be limited.



Shipping and Storage

This product is supplied in road tankers or in non-returnable plastic drums secured by a lid with clamping ring or in non-returnable palletized bulk containers (net volume 1.000 lt). The product must be protected from frost and exposure to direct sunlight. Storage temperatures between +5 °C and +30 °C are recommended. The product contains in-can preservation to protect it against microbiological attack during transportation. For protection against microbiological contamination during storage stringent plant hygiene is essential. Depending on the storage conditions addition of suitable preservatives may be necessary. Care must be taken that drums and containers are properly closed. During storage, shipping and handling contact with metal surfaces that are not corrosion protected must be avoided. When stored properly, the product has a shelf life of 12 months from the date of delivery.

Product Security/Health and Safety

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

Effluents and Pollution Control

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

For further information regarding this product please refer to:

Zieglerova, Jeaneta
Phone: +420 737 206 966
FAX:
eMail: Jeaneta.Zieglerova@synthomer.com


Properties

Character Value Unit
Solids Content 50
pH Value 8.0
Viscosity (Brookfield LVT Spindle 2/6 Upm) 2500 mPa s 
Glass Transition Temperature 14 °C 
Density 1.05 g/cm³ 
Mean Particle Size 0.1 µm 
Minimum Film-Forming Temperature 4 °C 
Surface Tension 42 mN/m 
Water Absorption (24h) 9
Tensile Strength 10 N/mm² 
Elongation at Break 500


Available Documents

Technical datasheet


© 2018 Synthomer plc



6