PLEXTOL D 2610

PLEXTOL D 2610 is an aqueous dispersion of a pure acrylic copolymer for exterior paints.



Technical Informations

Application Advice/Typical Applications

PLEXTOL D 2610 dispersion is designed for various types of paints, on a wide range  of  pigment  volume concentration  (%  PVC),  from  varnish to  matt  paints.  We  can  list  as examples :  

- Interior/exterior matt paint 

- High durability exterior coatings 

- Wood paints 

- Semi-gloss and gloss paints. 

 

PLEXTOL  D  2610  can  also  be  used  in  interior/exterior  mosaic  plaster formulation  excellent  resistance  to outdoor weathering exposure. 

 

PLEXTOL  D  2610  forms  transparent, medium  hard  film  with  very  low blanching  and  water  absorption values. 






Shipping and Storage

Store at an even temperature of between +5°C and +35°C avoiding frost and direct sunlight. Stir product before use. If stored according to these conditions and in the original unopened containers, the dispersion will be stable for 6 months following delivery. Product should be used as soon as possible after opening. During processing, storage and transport, avoid any contact with metals (including non-ferrous metals) which are not protected against corrosion.
Detailed information is available on request.

Product Security/Health and Safety

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.





For further information regarding this product please refer to:

Zieglerova, Jeaneta
Phone: +420 737 206 966
FAX:
eMail: Jeaneta.Zieglerova@synthomer.com


Properties

Character Value Unit
Solids content 48.0
pH 7.25  
Viscosity (Brookfield S2/50) 450 mPa*s 
MFFT 25 °C 
Tg 25 °C 


Available Documents

Technical datasheet


© 2018 Synthomer plc