REVACRYL UltraGreen 3710 is an aqueous dispersion of styrene-acrylic copolymer. This product is APEO and ammonia free.

Technical Informations

Application Advice/Typical Applications

REVACRYL  UltraGreen  3710  is  specially designed  for  low  VOC  and/or odourless  paints.  It  allows  to formulate  paints  in  compliance  with last ecological regulations. Due  to  high  compatibility  with potassium  water  glass  and  alkali resistance,  it  is  especially recommended  for  silicate  interior  / exterior systems. REVACRYL  UltraGreen  3710  can  be  also used  in  a  wide  range  of  interior  and exterior masonry coatings.  

Shipping and Storage

Store at an even temperature of between +5°C and +35°C avoiding frost and direct sunlight. Stir product before use. If stored according to these conditions and in the original unopened containers, the dispersion will be stable for 6 months following delivery. Product should be used as soon as possible after opening. During processing, storage and transport, avoid any contact with metals (including non-ferrous metals) which are not protected against corrosion.
Detailed information is available on request.

Product Security/Health and Safety

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

For further information regarding this product please refer to:

Zieglerova, Jeaneta
Phone: +420 737 206 966


Character Value Unit
Solids content 50.0
pH 7.0  
Viscosity (Brookfield 3/50) 1100 mPa*s 
MFFT 5 °C 
Tg 9 °C 

Available Documents

Technical datasheet

© 2018 Synthomer plc