REVACRYL UltraFine 4210 is a fine particle sized dispersion of a styrene-acrylic copolymer for penetrating primers.

Technical Informations

Application Advice/Typical Applications

REVACRYL  UltraFine  4210  is  especially developed  for  penetration  of  mineral substrates.  It  is  suitable  for  exterior and  interior  application.  Due  to  the excellent  consolidation  effect  of chalky  substrates  REVACRYL  UltraFine 4210  is  an  ideal  product  for production of primers and sealers.   


Shipping and Storage

This product is supplied in road tankers or in non-returnable plastic drums secured by a lid with clamping ring or in non-returnable palletized bulk containers (net volume 1.000 lt). The product must be protected from frost and exposure to direct sunlight. Storage temperatures between +5 °C and +30 °C are recommended. The product contains in-can preservation to protect it against microbiological attack during transportation. For protection against microbiological contamination during storage stringent plant hygiene is essential. Depending on the storage conditions addition of suitable preservatives may be necessary. Care must be taken that drums and containers are properly closed. During storage, shipping and handling contact with metal surfaces that are not corrosion protected must be avoided. When stored properly, the product has a shelf life of 6 months from the date of delivery.

Product Security/Health and Safety

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

For further information regarding this product please refer to:

Zieglerova, Jeaneta
Phone: +420 737 206 966


Character Value Unit
Solids content 31.0
pH 7.5  
Viscosity (Brookfield 2/50) < 100 mPa*s 
MFFT < 1 °C 
Tg 10 °C 
Particle size 40 nm 
Appearance translucent or slightly milky or yellowish  

Available Documents

Technical datasheet

© 2020 Synthomer plc