PLEXTOL L 3851

PLEXTOL L 3851 is a pure acrylic copolymer for mosaic plaster formulations.



Technical Informations

Application Advice/Typical Applications

PLEXTOL L 3851 is especially designed as binder for interior/exterior mosaic plaster formulation with excellent to outdoor weathering exposure. PLEXTOL L3851 dries at temperatures higher than approx. 20°C forming transparent, medium hard film with very low blanching and water absorption values. 






Shipping and Storage

This product is supplied in road tankers or in non-returnable plastic drums secured by a lid with clamping ring or in non-returnable palletized bulk containers (net volume 1.000 lt). The product must be protected from frost and exposure to direct sunlight. Storage temperatures between +5 °C and +30 °C are recommended. The product contains in-can preservation to protect it against microbiological attack during transportation. For protection against microbiological contamination during storage stringent plant hygiene is essential. Depending on the storage conditions addition of suitable preservatives may be necessary. Care must be taken that drums and containers are properly closed. During storage, shipping and handling contact with metal surfaces that are not corrosion protected must be avoided. When stored properly, the product has a shelf life of 6 months from the date of delivery.

Product Security/Health and Safety

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.





For further information regarding this product please refer to:

Zieglerova, Jeaneta
Phone: +420 737 206 966
FAX:
eMail: Jeaneta.Zieglerova@synthomer.com


Properties

Character Value Unit
Solids content 49.0
pH 7.5  
Viscosity (Brookfield 3/50) 650 mPa*s 
MFFT 20 °C 
Tg 23 °C 


Available Documents

Technical datasheet


© 2018 Synthomer plc



6