PLEXTOL PR 3500

PLEXTOL PR 3500 is an aqueous dispersion acrylic copolymer with an ultrafine particle size. It is particularly recommended for formulating penetrative primers for porous substrates. The emulsion can also be used in formulating products for use on wood, in particular wood stains. 



Technical Informations





Shipping and Storage

Store at an even temperature of between +5°C and +35°C avoiding frost and direct sunlight. Stir product before use. If stored according to these conditions and in the original unopened containers, the dispersion will be stable for 6 months following delivery. Product should be used as soon as possible after opening. During processing, storage and transport, avoid any contact with metals (including non-ferrous metals) which are not protected against corrosion. – Agitate well before use. - Detailed information is available on request.



Product Security/Health and Safety

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.





For further information regarding this product please refer to:

Fachinger, Thomas
Phone: +49(0)6181-9880094
FAX: +49(0)6181-9880094
eMail: thomas.fachinger@synthomer.com


Properties

Character Value Unit
Solids content 29.0
pH 7.0  
Viscosity <200 mPa.s 
Particle size 30 nm 
Specific Gravity 1.03 g/cm3 
MFFT <5 °C 
Tg 16 °C 


Available Documents

Technical datasheet


© 2018 Synthomer plc