PLEXTOL A 1819 is an aqueous dispersion of acrylic copolymer. It is anionic and APEO free.

Technical Informations

Application Advice/Typical Applications

A transparent, medium to highly viscous solution is obtained after neutralisation of PLEXTOL A 1819 with sodium hydroxide. PLEXTOL A 1819 provides outstanding wet-tack properties after neutralisation, making it suitable for use in wet glues for labels on glass substrates (e.g., beer bottles), while replacing casein. The labels can be washed off with an alkali solution (2% caustic soda) at 70-80 C.

Shipping and Storage

Store at an even temperature of between +5°C and +35°C avoiding frost and direct sunlight. Stir product before use. If stored according to these conditions and in the original unopened containers, the dispersion will be stable for 6 months following delivery. Product should be used as soon as possible after opening. During processing, storage and transport, avoid any contact with metals (including non-ferrous metals) which are not protected against corrosion. Detailed information is available on request.

Product Security/Health and Safety

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

For further information regarding this product please refer to:

Dr. Greiner, Katja
Phone: +49(0)2365-49-9816
FAX: +49(0)2365-49-6510


Character Value Unit
Solids Content 50.0
pH 4.5  
Viscosity after alkaline transfer (solution 16%, 50 s-1 ) 1250 mPa.s 
Glass Transition Temperature 20 °C 
Viscosity (250 s-1) 160 mPa.s 
MFFT approx. 0 °C 
Density (23°C) 1.07 g/cm³ 

Available Documents

Technical datasheet

© 2018 Synthomer plc