SYNTHOMER X1130

SYNTHOMER X1130 is an aqueous, colloidal dispersion of a carboxylated butadiene-acrylonitrile copolymer with a medium acrylonitrile level. The dispersion contains an emulsifier system and is stabilized with an antioxidant.

Available Documents

TDS Download

Technical Informations

Application Advice/Typical Applications

SYNTHOMER X1130 is easy to compound with no specific requirements during compounding as the material provides good stabilization.

SYNTHOMER X1130 is specifically designed for fabric supported glove dipping and fabric coating. Its high surface tension and total solids content makes it ideal for restricting penetration when the fabric is dipped in to the latex compound. With the right formualtion gloves made from SYNTHOMER X1130 gives good abrasion and puncture resistance. Our technical service team would be pleased to provide you with a typical formulation as a guide and assist if needed.

Shipping and Storage

SYNTHOMER X1130 is supplied in road tankers or in non-returnable plastics drums secured by a lid with clamping ring or in non-returnable palletized bulk containers. Store at an even temperature of between +5°C and +35°C, avoiding frost and direct sunlight. Care must be taken that drums and storage containers are closed tightly. During processing, storage and transport of the product, contact with metals, unprotected against corrosion (likewise non ferrous metals), has to be avoided. If stored according to these conditions, in appropriate containers or in bulk condition with proper hygiene management, Synthomer is able to confirm that the latex will be stable for 6 months following delivery.

Product Security/Health and Safety

Please refer to Material Safety Data Sheet for safety and environmental information. SYNTHOMER X1130 is not classified as as dangerous to EU Directive 1999/45/EC and does not require any special labelling.

Effluents and Pollution Control




For further information regarding this product please refer to:

Synthomer Sdn Bhd,
Phone: +607-739 1000
FAX: +607-739 1036
eMail: info.asia@synthomer.com


Properties

Character Value Unit
Solids Content 47
pH Value 8.2
Viscosity 55 mPa.s 
Surface Tension 41 mN/m 
Acrylonitrile Content Medium  


© 2014 Synthomer plc

Home » Markets & Products » Productfinder » Products A-Z » Technical datasheet

  • Paper & Board
  • Construction & Coatings
  • Health & Protection
  • Carpet, Compounds & Foam
  • Functional Polymers
  • Performance Polymers
  • Productfinder
  •     Products A-Z
  •     Products by Specifications