PLEXTOL D 268

PLEXTOL D 268 an aqueous acrylic emulsion for PSA applications.

Available Documents

TDS Download

Technical Informations

Application Advice/Typical Applications

PLEXTOL D 268 is used in low noise tape applications, e. g. for carton sealing tapes. It shows an excellent inital tack to fibre board and is especially suitable for crystall clear and colourless tapes.  PLEXTOL D 268 has a good runnability and good drying properties on fast running coating lines.  -  This product doesn't show ammonia-smell. - 

PLEXTOL D 268 is protected against bacterial attack during storage. In the manufacture of finished products, the material has to be re-treated, as usual, with suitable agents to give enhanced preservation. PLEXTOL D 268 can be thickened by means of thickener emulsions e. g. Rohagit SD 15 or PU-Thickener e.g. Tego Rheo 8600.  - If needed wetting on critical surfaces can be improved by adding surfactants like Hydropalat 875. - PLEXTOL D 268 is crosslinkable due to the presence of functionalized comonomers

Shipping and Storage

Store at an even temperature of between +5°C and +35°C avoiding frost and direct sunlight. Stir product before use. If stored according to these conditions and in the original unopened containers, the dispersion will be stable for 12 months following delivery. Product should be used as soon as possible after opening. During processing, storage and transport, avoid any contact with metals (including non-ferrous metals) which are not protected against corrosion. Detailed information is available on request.

Product Security/Health and Safety

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

Effluents and Pollution Control

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

For further information regarding this product please refer to:

Dr. Greiner, Katja
Phone: +49(0)2365-49-9816
FAX: +49(0)2365-49-6510
eMail: katja.greiner@synthomer.com


Properties

Character Value Unit
Solids Content 55
pH Value 8,5  
Viscosity (Brookfield RVT 2/20) 100 mPa s 
Glass Transition Temperature - 42 °C 
Density 1.03 g/cm³ 
Peel adhesion (PET / Steel) ~ 7 N/25mm 


© 2014 Synthomer plc

Home » Markets & Products » Productfinder » Products A-Z » Technical datasheet

  • Paper & Board
  • Construction & Coatings
  • Health & Protection
  • Carpet, Compounds & Foam
  • Functional Polymers
  • Performance Polymers
  • Productfinder
  •     Products A-Z
  •     Products by Specifications