PLEXTOL D 324

PLEXTOL D 324 is an aqueous, high solids dispersion of an acrylic ester copolymer. The dispersion contains an anionic/nonionic emulsifier system and is free from film forming aids, solvents and plasticizers.

Available Documents

TDS Download

Technical Informations

Application Advice/Typical Applications

PLEXTOL D 324 is preserved against bacterial and fungal attack. In the manufacture of finished products, the material has to be retreated, as usual, with suitable biocides to give enhanced preservation.

Above minimum film forming temperature PLEXTOL D 324 forms a clear, tacky film. PLEXTOL D 324 is an especially soft, cement- compatible pure acrylic dispersion, which is suitable as an elasticizing additive. Employment in cement containing systems such as flexible sealing compounds or flexible, water-resistant two-component building adhesives is typical. For the addition to hydraulically setting systems it is recommendable to adjust the pH value by means of diluted sodium hydroxide solution. The dispersion must be homogenized before use.

Shipping and Storage

PLEXTOL D 324 is supplied in road tankers or in non-returnable plastics drums secured by a lid with clamping ring or in non-returnable palletized bulk containers (net weight 1,000 kg). PLEXTOL D 324 has to be stored protected from frost and, as far as possible, below 40 °C. Storage at temperatures between + 5 and + 30 °C is recommendable. PLEXTOL D 324 contains a preservative to counter microbial attack during transportation. To protect it against germination during subsequent storage, absolutely stringent plant hygiene and, under certain circumstances, the addition of suitable preservatives will be necessary. When stored correctly PLEXTOL D 324 has a storage life of 12 months from date of delivery. Care must be taken to ensure that drums and storage containers are tightly closed. During processing, storage and transport of the product contact with metals unprotected against corrosion (likewise non-ferrous metals) has to be avoided.

Product Security/Health and Safety

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

Effluents and Pollution Control

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

For further information regarding this product please refer to:

Fachinger, Thomas
Phone: +49(0)6181-9880094
FAX: +49(0)6181-9880094
eMail: thomas.fachinger@synthomer.com


Properties

Character Value Unit
Solids Content 56
pH Value 7,5  
Viscosity 500 mPa s 
Glass Transition Temperature - 30 °C 
Density 1,04 g/cm³ 
Mean Particle Size 0,55 µm 
Minimum Film-Forming Temperature 0 °C 
Surface Tension 40 mN/m 
 
 


© 2014 Synthomer plc

Home » Markets & Products » Productfinder » Products A-Z » Technical datasheet

  • Paper & Board
  • Construction & Coatings
  • Health & Protection
  • Carpet, Compounds & Foam
  • Functional Polymers
  • Performance Polymers
  • Productfinder
  •     Products A-Z
  •     Products by Specifications