LIPATON SB 30Y130

LIPATON SB 30Y130 is a non-ionic stabilized carboxylated styrene/butadiene copolymer latex, containing non-staining antioxidant. It is freeze stable. This product is APEO and ammonia-free.

Available Documents

TDS Download

Technical Informations

Application Advice/Typical Applications

This material may show a slight phase separation during storage. Therefore it should be mixed prior to use. For additional information please contact our technical service team.

LIPATON SB 30Y130 is used preferable in cement mortars requiring fast strength development and high flexural tensile strength. The workability of mortar systems are in general not influenced by using LIPATON SB 30Y130. LIPATON SB 30Y130 does not contain plasticizers and other additives which can migrate. It is compatible with most hydraulic binders. A version with higher defoamer level is available under the product name LIPATON SB 30Y160.

Shipping and Storage

LIPATON SB 30y130 must be stored in closed containers between + 5 °C and + 35 °C and protected from frost and direct sunlight. If stored according to these conditions and in the original unopened containers, the dispersion will be stable for 6 months following delivery. However some cream formation cannot be ruled out. It is therefore advisable that the dispersion should be stirred, or mixed before use. Information on environmental and hazard data may be taken from the material safety data sheet. 

Product Security/Health and Safety

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

Effluents and Pollution Control

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

For further information regarding this product please refer to:

Fachinger, Thomas
Phone: +49(0)6181-9880094
FAX: +49(0)6181-9880094
eMail: thomas.fachinger@synthomer.com


Properties

Character Value Unit
Total Solids 47.0
pH 10.0  
Viscosity (Brookfield LVF, 60 rpm) 100 mPa.sec 
Glass transition temperature 18 °C 
MFFT 16 °C 


© 2014 Synthomer plc

Home » Markets & Products » Productfinder » Products A-Z » Technical datasheet

  • Paper & Board
  • Construction & Coatings
  • Health & Protection
  • Carpet, Compounds & Foam
  • Functional Polymers
  • Performance Polymers
  • Productfinder
  •     Products A-Z
  •     Products by Specifications