LITEX N VT-LA

Litex N VT-LA is an aqueous, colloidal dispersion of a carboxylated butadiene-acrylonitrile copolymer with a medium acrylonitrile level. The dispersion contains an anionic emulsifier system and is stabilized with an antioxidant.

Available Documents

TDS Download

Technical Informations

Application Advice/Typical Applications

Litex N VT-LA is used mainly to manufacture dipped goods and should be vulcanized. These articles have a good resistance to oils, petrol, greases and plasticizers. Unsupported gloves are manufactured by the "Coagulant Process". After the mould or former has been dipped in the latex compound, the coagulate (or film) that adheres to it is washed thoroughly with warm water (40 °C), dried at 80 °C and vulcanized at 100 - 130 °C. Supported gloves are produced by dipping the fabric glove, which is slipped onto a suitably sized former, into a thickened compound, dried and vulcanized at 100 - 130 °C. On request we will be pleased to provide you with typical formulations for your guidance.

Shipping and Storage

Store at an even temperature of between +5°C and +35°C avoiding frost and direct sunlight. Stir product before use. If stored according to these conditions and in the original unopened containers, the dispersion will be stable for 12 months following delivery. Product should be used as soon as possible after opening. During processing, storage and transport, avoid any contact with metals (including non-ferrous metals) which are not protected against corrosion. Detailed information is available on request.

Product Security/Health and Safety

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

Effluents and Pollution Control

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

For further information regarding this product please refer to:

Gehr, Andreas
Phone: +491726116380
FAX:
eMail: andreas.gehr@synthomer.com


Properties

Character Value Unit
Solids Content 45,0
pH Value 8,2  
Viscosity <100 mPa s 
Glass Transition Temperature - 25 °C 


© 2014 Synthomer plc

Home » Markets & Products » Productfinder » Products A-Z » Technical datasheet

  • Paper & Board
  • Construction & Coatings
  • Health & Protection
  • Carpet, Compounds & Foam
  • Functional Polymers
  • Performance Polymers
  • Productfinder
  •     Products A-Z
  •     Products by Specifications