PLEXTOL DS 155

PLEXTOL DS 155 is an low VOC aqueous emulsion of a thermoplastic acrylic polymer.

Available Documents

TDS Download

Technical Informations

Application Advice/Typical Applications


PLEXTOL DS 155 is protected against bacterial attack during storage. In the manufacture of finished products, the material has to be re-treated, as usual, with suitable agents to give enhanced preservation. PLEXTOL DS 155 can be diluted with water to provide liquors of any desired concentration. PLEXTOL DS 155 can be thickened by means of thickener emulsions (e. g.PU thickener TEGO XP 8500). PLEXTOL DS 155 can be applied by the usual methods such as spraying, impregnating, printing, padding and coating. By mixing PLEXTOL DS 155 with other emulsions from the PLEXTOL range, the film properties of the former can be influenced within wide limits and thus adapted to the intended application. Silicone coated papers are suitable for covering the self-adherent coatings. - PLEXTOL DS 155 can be used to produce special self-adherent tapes.

Shipping and Storage

Store at an even temperature of between +5°C and +35°C avoiding frost and direct sunlight. Stir product before use. If stored according to these conditions and in the original unopened containers, the dispersion will be stable for 12 months following delivery. Product should be used as soon as possible after opening. During processing, storage and transport, avoid any contact with metals (including non-ferrous metals) which are not protected against corrosion. Detailed information is available on request.

Product Security/Health and Safety

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

Effluents and Pollution Control

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

For further information regarding this product please refer to:

Dr. Greiner, Katja
Phone: +49(0)2365-49-9816
FAX: +49(0)2365-49-6510
eMail: katja.greiner@synthomer.com


Properties

Character Value Unit
Solids Content 65
pH Value 5.0  
Viscosity (Brookfield RVT 2/20) 425 mPas 
Glass Transition Temperature - 34 °C 
Mean Particle Size 0.45 µm 
Loop tack (PET/Glass) 32 N/25mm 
Peel adhesion (PET/Steel) 26 N/25mm 
Ionic Character anionic  
Dynamic shear (PET/Steel) 31 N/12.7 mm 


© 2014 Synthomer plc

Home » Markets & Products » Productfinder » Products A-Z » Technical datasheet

  • Paper & Board
  • Construction & Coatings
  • Health & Protection
  • Carpet, Compounds & Foam
  • Functional Polymers
  • Performance Polymers
  • Productfinder
  •     Products A-Z
  •     Products by Specifications