SYNTHOMER X3011 is an aqueous, colloidal dispersion of carboxylated butadiene-acrylonitrile copolymer with a medium acrylonitrile level. It contains our proprietary self cross-linking system, requiring no sulphur and accelerator. The dispersion contains an emulsifier system and is stabilized with an antioxidant.

Available Documents

TDS Download

Technical Informations

Application Advice/Typical Applications

SYNTHOMER X3011 is easy to compound with no sulphur and accelerator required during compounding and the material provides good stabilization. It is easily adaptable to most manufacturing conditions with no specific requirements and cured as per any standard sulphur and accelerator latex system.

SYNTHOMER X3011 is recommended for producing thin film barrier with improved colour and minimizing against type IV allergy. It provides good tensile strength and high elongation at break. The product are characterized by quick gelling, giving good film formation using a typical coagulant dipping process. Our technical service team would be please to provide you with a typical formulation as a guide and assist if needed.

Shipping and Storage

SYNTHOMER X3011 is supplied in road tankers or in non-returnable plastics drums secured by a lid with clamping ring or in non-returnable palletized bulk containers. Store at an even temperature of between +5°C and +35°C, avoiding frost and direct sunlight. care must be taken that drums and storage containers are closed tightly. During processing, storage and transport of the product, contact with metals, unprotected against corrosion (likewise non ferrous metals), has to be avoided. If stored according to these conditions, in appropriate containers or in bulk condition with proper hygiene management, Synthomer is able to confirm that the latex will be stable for 6 months following delivery

Product Security/Health and Safety

Please refer to the Material Safety Data Sheet for safety and environmental information. SYNTHOMER X3011 is not classified as dangerous according to EU Directive 1999/45/EC and does not require any special labelling.

Effluents and Pollution Control

For further information regarding this product please refer to:

Synthomer Sdn Bhd,
Phone: +607-739 1000
FAX: +607-739 1036


Character Value Unit
Solid Content 45
pH Value 8.2
Viscosity 45 mPa.s 
Surface Tension 32 mN/m 
Acrylonitrile Content Medium  

© 2014 Synthomer plc

Home » Markets & Products » Productfinder » Products A-Z » Technical datasheet

  • Paper & Board
  • Construction & Coatings
  • Health & Protection
  • Carpet, Compounds & Foam
  • Functional Polymers
  • Performance Polymers
  • Productfinder
  •     Products A-Z
  •     Products by Specifications