LITEX T 73G20

Litex® T 73G20 is an aqueous dispersion of a carboxylated styrene-butadiene copolymer. Litex® T 73G20 has been developed especially for synthetic grass coating. Litex® T 73G20 gives the textiles a soft handle. Litex® T 73G20 contains an antioxidant.

Available Documents

TDS Download

Technical Informations

Application Advice/Typical Applications

Litex® T 73G20 should be applied in the unfoamed state. Compounds thereof can be applied with the use of a lick-roller as well as with a blade or doctor-roller at a foam table. To use the product in the foamed state it may be necessary to add additional emulsifier. Type and amount of the additive have to be pre-checked especially with respect to the properties of the finished articles. Litex® T 73G20 is used with fillers such as calcium carbonate, or can be used as a filler-free system. The filler content of compound should be kept as low as economically possible, in order to ensure that the finished article is capable of being recycled after its useful life. The viscosity of compounds can be adjusted to the desired level using the normal acrylate thickeners which are well known in the industry (e.g. Plextol® T 70S10). Due to the special composition and although the product has a good mechanical stability too high shearing forces during compounding should be avoided.

Litex® T 73G20 has good storage characteristics and also good mechanical and chemical stability.

Shipping and Storage

Litex® T 73G20 is normally delivered in road tankers. Shipment in 1 ton containers is also possible for customers which are just taking small quantities. The storage temperature of the dispersion should not fall below + 5 °C and not exceed + 40 °C. In air-tight, unopened, original drums or containers, and provided the storage conditions are met, the dispersion is stable for 6 months after delivery. However a slight drying of the surface, or some cream formation cannot be ruled out. It is therefore advisable that the dispersion, or compounds made from it, should stirred, or mixed before use. The contents of drums, or containers, should be used up as soon as possible after opening.

Product Security/Health and Safety

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

Effluents and Pollution Control

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

For further information regarding this product please refer to:

Dr. Wagner, Sandra
Phone: +49 (0)2365-49-2819
FAX: +49 (0)2365-49-2529
eMail: Sandra.Wagner@synthomer.com


Properties

Character Value Unit
Solids Content 52,0
pH Value 7,3  
Viscosity (Brookfield LV 2/30) < 500 mPas 


© 2014 Synthomer plc

Home » Markets & Products » Productfinder » Products A-Z » Technical datasheet

  • Paper & Board
  • Construction & Coatings
  • Health & Protection
  • Carpet, Compounds & Foam
  • Functional Polymers
  • Performance Polymers
  • Productfinder
  •     Products A-Z
  •     Products by Specifications