SYNTHOMER X1172

SYNTHOMER X1172 is an aqueous, colloidal dispersion of carboxylated butadiene-acrylonitrile copolymer with a high acrylonitrile level. The dispersion contains an emulsifier system and is stabilized with an antioxidant.

Available Documents

TDS Download

Technical Informations

Application Advice/Typical Applications

SYNTHOMER X1172 is easy to compound with no specific requirements during compounding as the material provides good stabilization. It is easily adaptable to most manufacturing conditions, providing good yield.

SYNTHOMER X1172 is designed for the manufacture of industrial gloves, prepared by coagulant dipping. With the right formulation, gloves made from SYNTHOMER X1172 give very high resistance to oil, grease, petrol and plasticizers. Our technical service team would be pleased to provide you with a typical formulation as a guide and assist if needed.

Shipping and Storage

SYNTHOMER X1172 is supplied in road tankers or in non-returnable plastics drums secured by a lid with clamping ring or in non-returnable palletized bulk containers. Store at an even temperature of between +5°C and +35°C, avoiding frost and direct sunlight. care must be taken that drums and storage containers are closed tightly. During processing, storage and transport of the product, contact with metals, unprotected against corrosion (likewise non ferrous metals), has to be avoided. If stored according to these conditions, in appropriate containers or in bulk condition with proper hygiene management, Synthomer is able to confirm that the latex will be stable for 6 months following delivery.

Product Security/Health and Safety

Please refer to the Material Safety Data Sheet for safety and environmental information. SYNTHOMER X1172 is not classified as dangerous to EU Directive 1999/45/EC and does not require any special labelling.

Effluents and Pollution Control




For further information regarding this product please refer to:

Synthomer Sdn Bhd,
Phone: +607-739 1000
FAX: +607-739 1036
eMail: info.asia@synthomer.com


Properties

Character Value Unit
Solids Content 40
pH Value 7.8
Viscosity 65 mPa.s 
Surface Tension 40 mN/m 
Acrylonitrile Content High  


© 2014 Synthomer plc

Home » Markets & Products » Productfinder » Products A-Z » Technical datasheet

  • Paper & Board
  • Construction & Coatings
  • Health & Protection
  • Carpet, Compounds & Foam
  • Functional Polymers
  • Performance Polymers
  • Productfinder
  •     Products A-Z
  •     Products by Specifications