REVERSOL P-980 P

Reversol P-980 P is a thixotropic, ISO - NPG, pre-promoted unsaturated polyester gelcoat resin with excellent durability and water resistance, specially developed for use in tropical climates. It is designed for use in sanitary ware and for chemical plant process fabrication, but is equally suitable for other mouldings where good resistance to water and chemicals is important. It contains UV-absorber for resistant enhancement against ultra-violet / sunlight degradation. Reversol P-980 P is supplied as a non-pigmented solution in styrene monomer and formulated to be applied by spray. For brush application, Reversol P-960 should be used.

Available Documents

TDS Download

Technical Informations

Application Advice/Typical Applications

(# Curing schedule was 12 hrs at 25ºC followed by 12hr 50ºC and 3 hrs at 80ºC except for HDT where schedule was 12 hrs 25ºC followed by 3hr 50ºC, 3 hrs 80 and 3 hrs at 120ºC) Reversol P-980 P is compatible with most unsaturated-resin base color paste.

Application method : Spray Recommended catalyst level : 1.5 – 2.0% Recommended film thickness (wet) Moulding making : 0.80 – 1.00 mm (0.030-0.047 inches) FRP parts : 0.50 – 1.00 mm (0.020-0.040 inches) As a guide 600-1000 g/m2 wet gelcoat should furnish above gelcoat thickness for FRP parts.

Shipping and Storage

To ensure maximum stability and to maintain optimum resin properties, Reversol P-980 P should be stored in close containers below 32ºC and away from heat sources and sunlight. All storage should conform to local fire and building codes. Drums should be stored away from all sources of flame or combustion. Inventory should be maintained at minimum reasonable stock and used on a first-in-first-out basis. When properly stored, Reversol P-980 P will remain stable for 3 months from date of delivery.

Product Security/Health and Safety

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

Effluents and Pollution Control

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

For further information regarding this product please refer to:

Synthomer Limited Head Office
Phone: +44 (0)1279 436 211
FAX: +44 (0)1279 444 025
eMail: info@synthomer.com


Properties

Character Value Unit
Appearance Light pinkish Opaque thixotropic resin, free from lumps and bits  
Viscosity@ 25°C - Brookfield, #5/1 55,000-80,000 cps 
Viscosity@ 25°C - Brookfield, #5/10 85,00-11,500 cps 
Thixotropic Index @ 25°C - #5 6.5 minimum 1 and 10 rpm 
Geltime @ 25°C -100g gelcoat + 2 ml MEKP 6 – 9 minutes 
Specific Gravity 1.11  
Tensile Strength 71 MPa 
Tensile Modulus 4504 MPa 
Elongation at break 2
Flexural Strength 129 MPa 
Flexural Modulus 3682 MPa 
Water Absorption 24 hr at 25°C 8.6 mg 
Deflection Temperature (under load 1.80 MPa) 96 °C 
Barcol hardness (model GYZJ 934-1) 49  


© 2014 Synthomer plc

Home » Markets & Products » Productfinder » Products A-Z » Technical datasheet

  • Paper & Board
  • Construction & Coatings
  • Health & Protection
  • Carpet, Compounds & Foam
  • Functional Polymers
  • Performance Polymers
  • Productfinder
  •     Products A-Z
  •     Products by Specifications