REVERSOL P 760PA is an orthophthalic, clear, preaccelerated unsaturated polyester gelcoat designed for brush application. This gelcoat is compatible with all unsaturated polyester colour pigment pastes. For normal moulding application, REVERSOL P 760PA should be controlled at 0.5-1.0mm wet film thickness. Medium reactivity catalyst Methyl Ethyl Ketone Peroxide (MEKP) at 1 – 2% by weight is recommended for use in tropical condition. REVERSOL P 760PA gelcoat should not be applied at temperatures below 15°C. Always homogenize this gelcoat before use, by stirring well with hand or with a low shear mixer to avoid aeration, and then allow to stand to regain thixotropy. Addition of fillers is not recommended because it can adversely affect the properties of the gelcoat.

Available Documents

TDS Download

Technical Informations

Application Advice/Typical Applications

(# Curing schedule was 24 hrs at 20ºC followed by 3 hrs at 80ºC except for Deflection Temperature where schedule was 24 hrs 20ºC followed by 5 hrs 80ºC and 3 hrs at 120ºC)

Coating for FRP products intended for indoor and non corrosive environment.

Shipping and Storage

To ensure maximum stability and maintain optimum resin properties, REVERSOL P 760PA should be stored in close containers maintained below 32°C and away from heat sources and sunlight. All storage should conform to local fire and building code. Inventory should be maintained at minimum reasonable stock and used on a first-in-first-out basis. When properly stored, REVERSOL P 760PA will remain stable for 3 months from date of delivery.

Product Security/Health and Safety

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

Effluents and Pollution Control

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

For further information regarding this product please refer to:

Synthomer Limited Head Office
Phone: +44 (0)1279 436 211
FAX: +44 (0)1279 444 025


Character Value Unit
Appearance Opaque, hazy pink resin, free from bits and lumps  
Viscosity@ 25 °C - Brookfield, #5/1 16,0000 –24,0000 cps 
Viscosity@ 25 °C - Brookfield, #5/10 28,000 – 36,000 cps 
Thixotropic Index 5.7 – 7.1  
Geltime @ 25 °C 8 – 12 minute - 100g gelcoat + 10g styrene + 2ml MEKP 
Specific Gravity 1.10  
Viscosity@ 25°C 20 – 25 P - ICI Cone & Plate 
Non-Volatile 68 ± 2
Tensile Strength 31 MPa 
Tensile Modulus 1500 MPa  
Elongation at Break 5.5
Water Absorption 24 hr at 25 ºC 38 mg 
Deflection Temperature (1.80 MPa Load)Load 38 ºC 
Barcol Hardness (Model GYZJ 934-1)-- 32  

© 2014 Synthomer plc

Home » Markets & Products » Productfinder » Products A-Z » Technical datasheet

  • Paper & Board
  • Construction & Coatings
  • Health & Protection
  • Carpet, Compounds & Foam
  • Functional Polymers
  • Performance Polymers
  • Productfinder
  •     Products A-Z
  •     Products by Specifications