REVULTEX VRB 4/001

VRB 4/001 is a two-part vulcanisable compound. The Part A is natural rubber latex while Part B is the curative chemicals.

Available Documents

TDS Download

Technical Informations

Application Advice/Typical Applications



VRB 4/001 is designed for the manufacture of examination gloves, powdered and powder-free gloves (by chlorination process). The recommended mixing ratio of Part A and Part B is 100 : 3.5 parts by weight (wet basis). As a guide it is recommended that a maturation period of about 36 – 48 hours at about 30°C be allowed before commencing dipping.

Shipping and Storage

Store the product under shelter at temperature between 10°C and 33°C. Creaming of the latex compound may occur during storage. Therefore it is necessary to mix well the compound before use. As the product is based on natural rubber latex, changes in colloidal properties may occur during storage. Available in both drum and bulk.

Product Security/Health and Safety

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

Effluents and Pollution Control

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

For further information regarding this product please refer to:

Synthomer Limited Head Office
Phone: +44 (0)1279 436 211
FAX: +44 (0)1279 444 025
eMail: info@synthomer.com


Properties

Character Value Unit
Total Solid Content 60.5
Ammonia Content 0.70
Mechanical Stability 2500 sec 
Brookfield Viscosity (LVT, Spindle 1/30 rpm, 28°C) 67.5 cps 
Total Solid Content 49.7
Tensile Strength 30.0 MPa 
Elongation at break 850
Tensile Strength 23.0 MPa 
Elongation at break 880


© 2014 Synthomer plc

Home » Markets & Products » Productfinder » Products A-Z » Technical datasheet

  • Paper & Board
  • Construction & Coatings
  • Health & Protection
  • Carpet, Compounds & Foam
  • Functional Polymers
  • Performance Polymers
  • Productfinder
  •     Products A-Z
  •     Products by Specifications